Registration Dossier

Administrative data

First-aid measures

1 Description of first aid measures
· General information:
No special measures required.
· After inhalation:
Supply fresh air or oxygen; call for doctor.
In case of unconsciousness place patient stably in side position for transportation.
· After skin contact:
Mechanically remove (highly viscous liquid). Clean with ethanol and then wash with water and soap. After cleaning apply skin cream. In case of prolonged skin irritation contact doctor.
· After eye contact:
Rinse opened eye for several minutes under running water. Then consult a doctor.
· After swallowing:
Danger of choking (highly viscous liquid)! Mechanically remove. Rinse mouth with water.

2 Most important symptoms and effects, both acute and delayed
No further relevant information available.

3 Indication of any immediate medical attention and special treatment needed
No further relevant information available.

Fire-fighting measures

1 Extinguishing media
· Suitable extinguishing agents:
Use fire extinguishing methods suitable to surrounding conditions.

2 Special hazards arising from the substance or mixture
In case of fire, the following can be released:
Carbon monoxide (CO)
Carbon dioxide (CO2)
Nitrogen oxides (NOx)
Hydrogen cyanide (HCN)

3 Advice for firefighters
· Protective equipment:
No special measures required.

Accidental release measures

1 Personal precautions, protective equipment and emergency procedures
Wear protective clothing.

2 Environmental precautions
No special measures required.

3 Methods and material for containment and cleaning up
Pick up mechanically.

Handling and storage

1 Precautions for safe handling
Only adequately trained personnel should handle this product.
· Information about fire - and explosion protection:
No special measures required.

2 Conditions for safe storage, including any incompatibilities
· Storage:
· Requirements to be met by storerooms and receptacles:
Store only in the original receptacle.
· Information about storage in one common storage facility:
Not required.
· Further information about storage conditions:
Protect from heat and direct sunlight.

3 Specific end use(s)
No further relevant information available.

Transport information

Land transport (ADR/RID)

UN number:
Void
Shippingopen allclose all
Class:
void
Classification code:
void
Packaging group:
void
Labels:
void
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
void
Shippingopen allclose all
Class:
void
Classification code:
void
Packaging group:
void
Labels:
void
Remarksopen allclose all

Marine transport (IMDG)

UN number:
void
Proper shipping name and description:
void
Chemical name:
Reaction mass of 2-{[(2-{3-[2-({[2-(methacryloyloxy)ethoxy]carbonyl}amino)propan-2-yl]phenyl}propan-2-yl)carbamoyl]oxy}propyl methacrylate and 1,3-phenylenebis(propane-2,2-diylcarbamoyloxyethane-2,1-diyl) bis(2-methylacrylate) and 1,3-phenylenebis(propane-2,2-diylcarbamoyloxypropane-2,1-diyl) bis(2-methylacrylate)
Class:
void
Packaging group:
void
EmS code:
void
Labels:
void
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
void
Proper shipping name and description:
void
Chemical name:
Reaction mass of 2-{[(2-{3-[2-({[2-(methacryloyloxy)ethoxy]carbonyl}amino)propan-2-yl]phenyl}propan-2-yl)carbamoyl]oxy}propyl methacrylate and 1,3-phenylenebis(propane-2,2-diylcarbamoyloxyethane-2,1-diyl) bis(2-methylacrylate) and 1,3-phenylenebis(propane-2,2-diylcarbamoyloxypropane-2,1-diyl) bis(2-methylacrylate)
Class:
void
Packaging group:
void
Labels:
void
Remarksopen allclose all

Additional transport information

Additional transport information
Product is not classified as a dangerous good for transport (ADR, IMDG, IATA).

Exposure controls / personal protection

1 Control parameters
· Ingredients with limit values that require monitoring at the workplace:
Not required.
· Additional information:
The lists valid during the making were used as basis.

2 Exposure controls
· Personal protective equipment:
· General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals.
Keep away from foodstuffs, beverages and feed.
Wash hands before breaks and at the end of work.
Avoid contact with the skin.
· Respiratory protection:
Not required.
· Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
· Material of gloves:
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/the chemical mixture.
· Penetration time of glove material:
No further relevant information available.
· Eye protection:
Tightly sealed goggles

Stability and reactivity

1 Reactivity
No further relevant information available.

2 Chemical stability
Danger of polymerisation due to the effects of heat/sun.
· Thermal decomposition / conditions to be avoided:
No decomposition if used according to specifications.

3 Possibility of hazardous reactions
Reacts with strong oxidising agents.
Reacts with strong acids and alkali.
Initiators for radical polymerisation.

4 Conditions to avoid
Keep away from heat and direct sunlight.

5 Incompatible materials:
No further relevant information available.

6 Hazardous decomposition products:
None under normal conditions of storage and use.

Disposal considerations

1 Waste treatment methods
· Recommendation:
Take to an approved landfill or a waste incineration plant, under conditions approved by the local authority.

2 Uncleaned packaging
· Recommendation:
Disposal must be made according to official regulations.