Registration Dossier

Administrative data

First-aid measures

4.1 Description of first aid measures
· After inhalation Supply fresh air; consult doctor in case of symptoms.
· After skin contact
Immediately wash with water and soap and rinse thoroughly.
If skin irritation continues, consult a doctor.
· After eye contact Rinse opened eye for several minutes under running water.
· After swallowing In case of persistent symptoms consult doctor.
· 4.2 Most important symptoms and effects, both acute and delayed
No further relevant information available
4.3 Indication of any immediate medical attention and special treatment needed
No further relevant information available

Fire-fighting measures

· 5.1 Extinguishing media
· Suitable extinguishing agents CO2, sand, extinguishing powder. Do not use water.
· For safety reasons unsuitable extinguishing agents Water.
· 5.2 Special hazards arising from the substance or mixture
No further relevant information available.
· 5.3 Advice for firefighters
· Protective equipment: No special measures required.

Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures
Bring persons out of danger.
· 6.2 Environmental precautions:
Inform respective authorities in case product reaches water or sewage system.
· 6.3 Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose of contaminated material as waste according to item 13.
· 6.4 Reference to other sections
See Section 8 for information on personal protection equipment.

Handling and storage

· 7.1 Precautions for safe handling Store in cool, dry place in tightly closed containers.
· Information about protection against explosions and fires: No special measures required.
· 7.2 Conditions for safe storage, including any incompatibilities
· Storage
· Requirements to be met by storerooms and containers: No special requirements.
· Information about storage in one common storage facility: Not required.
· Further information about storage conditions: None.
· 7.3 Specific end use(s) No further relevant information available.

Transport information

Land transport (ADR/RID)

UN number:
1993
Shippingopen allclose all
Class:
3
Classification code:
3
Packaging group:
III
Labels:
3
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
1993
Shippingopen allclose all
Class:
3
Classification code:
3
Packaging group:
III
Labels:
3
Remarksopen allclose all

Marine transport (IMDG)

UN number:
1993
Proper shipping name and description:
FLAMMABLE LIQUID, N.O.S. (Silicic acid
(H4SiO4), tetraethyl ester, reaction products with
bis(acetyloxy)dioctylstannane)
Chemical name:
FLAMMABLE LIQUID, N.O.S. (Silicic acid
(H4SiO4), tetraethyl ester, reaction products with
bis(acetyloxy)dioctylstannane)
Class:
2
Packaging group:
III
EmS code:
F-E,S-E
Labels:
3
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
1993
Proper shipping name and description:
FLAMMABLE LIQUID, N.O.S. (Silicic acid
(H4SiO4), tetraethyl ester, reaction products with
bis(acetyloxy)dioctylstannane)
Chemical name:
FLAMMABLE LIQUID, N.O.S. (Silicic acid
(H4SiO4), tetraethyl ester, reaction products with
bis(acetyloxy)dioctylstannane)
Class:
3
Packaging group:
III
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

· 8.1 Control parameters
· Components with limit values that require monitoring at the workplace: Not required.
· Additional information: The lists that were valid during the compilation were used as basis.
· 8.2 Exposure controls
· Personal protective equipment
· General protective and hygienic measures
Wash hands during breaks and at the end of the work.
· Breathing equipment: Not required.
(· Protection of hands:
The glove material has to be impermeable and resistant to the product/ the substance/ the
preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
· Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks
of quality and varies from manufacturer to manufacturer.
· Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and
has to be observed.
· Eye protection: Safety glasses recommended during refilling.
· Body protection: Protective work clothing.
SECTION 9:

Stability and reactivity

10.1 Reactivity
· 10.2 Chemical stability
· Thermal decomposition / conditions to be avoided:
No decomposition if used according to specifications.
· 10.3 Possibility of hazardous reactions No dangerous reactions known
· 10.4 Conditions to avoid No further relevant information available.
· 10.5 Incompatible materials: No further relevant information available.
· 10.6 Hazardous decomposition products: No dangerous decomposition products known
GB

Disposal considerations

· 13.1 Waste treatment methods
· Recommendation Must be specially treated under adherence to official regulations.
· Uncleaned packagings:
· Recommendation: Disposal must be made according to official regulations.