Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

First aid measures:

If inhaled:

- Remove to fresh air.

- Oxygen or artificial respiration if needed.

- Call a physician immediately.

In case of eye contact:

- Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.

- If eye irritation persists, consult a specialist.

In case of skin contact:

- Wash off with soap and water.

If swallowed:

- Drink 1 or 2 glasses of water.

- Do NOT induce vomiting.

- If symptoms persist, call a physician.

Most important symptoms and effects, both acute and delayed

Inhalation:

- Symptoms: slight irritation, Upper respiratory tract, Cough, Breathing difficulties

Skin contact:

- May cause skin irritation and/or dermatitis.

Eye contact

- Contact with eyes may cause irritation.

- Redness

Ingestion

- Ingestion may provoke the following symptoms:

- Symptoms: Nausea, Vomiting, Diarrhoea

Fire-fighting measures

Special hazards arising from the substance or mixture

- In use, may form flammable/explosive vapour-air mixture.

- In case of fire hazardous decomposition products may be produced such as: Gaseous hydrogen fluoride (HF), Fluorophosgene

Suitable extinguishing media

- Water

- powder

- Foam

- Dry chemical

- Carbon dioxide (CO2)

Unsuitable extinguishing media: None.

Advice for firefighters

- Wear self-contained breathing apparatus and protective suit.

- When intervention in close proximity wear acid resistant over suit.

- Evacuate personnel to safe areas.

- Approach from upwind.

- Protect intervention team with a water spray as they approach the fire.

- Keep containers and surroundings cool with water spray.

- Keep product and empty container away from heat and sources of ignition

Accidental release measures

Personal precautions, protective equipment and emergency procedures

Advice for non-emergency personnel

- Prevent further leakage or spillage if safe to do so.

Advice for emergency responders

- Ensure adequate ventilation.

- Sweep up to prevent slipping hazard.

- Keep away from open flames, hot surfaces and sources of ignition.

Environmental precautions

- Should not be released into the environment.

- Do not flush into surface water or sanitary sewer system.

Methods and materials for containment and cleaning up

- Soak up with inert absorbent material.

- Suitable material for picking up

- Earth

- Dry sand

- Shovel into suitable container for disposal.

Handling and storage

Precautions for safe handling

- In use, may form flammable/explosive vapour-air mixture.

- Ensure adequate ventilation.

- Use personal protective equipment.

- Keep away from heat and sources of ignition.

- No sparking tools should be used.

- Use only explosion-proof equipment.

- To avoid thermal decomposition, do not overheat.

- Take measures to prevent the build up of electrostatic charge.

- Clean and dry piping circuits and equipment before any operations.

- Ensure all equipment is electrically grounded before beginning transfer operations.

Hygiene measures

- Ensure that eyewash stations and safety showers are close to the workstation location.

- When using do not eat, drink or smoke.

- Wash hands before breaks and at the end of workday.

- Handle in accordance with good industrial hygiene and safety practice.

Conditions for storage, including incompatibilities

Storage

- Keep away from heat and sources of ignition.

- Keep in properly labelled containers

- Keep away from combustible material.

- Keep away from incompatible products

- Provide tight electrical equipment well protected against corrosion

Packaging material

Suitable material:

- Plastic materials.

- glass

- Stainless steel

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
not regulated
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
not regulated
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
not regulated
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
not regulated
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls

Control measures

Engineering measures

- Provide local ventilation appropriate to the product decomposition risk (see section 10).

- Refer to protective measures listed in sections 7 and 8.

- Apply technical measures to comply with the occupational exposure limits.

----------------------------------------------------

Individual protection measures

Respiratory protection

- In case of insufficient ventilation, wear suitable respiratory equipment.

- In case of vapour or mist, face mask with combined ABEK-P3 cartridge.

- Respiratory protection complying with EN 141.

- In case of decomposition (see section 10), use an air breathing apparatus with face mask.

- Self-contained open-circuit compressed air breathing apparatus (EN 137)

- Self-contained closed-circuit breathing apparatus compressed (EN 145)

Hand protection

- Protective gloves complying with EN 374.

Suitable material

- Nitrile rubber

- Neoprene gloves

- Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact).

Eye protection

- Safety goggles

- Use eye protection according to EN 166.

Skin and body protection

- Wear work overall and safety shoes.

Hygiene measures

- Ensure that eyewash stations and safety showers are close to the workstation location.

- When using do not eat, drink or smoke.

- Wash hands before breaks and at the end of workday.

- Handle in accordance with good industrial hygiene and safety practice.

---------------------------------------------------------------------

Environmental exposure controls

- Dispose of rinse water in accordance with local and national regulations.

Stability and reactivity

Reactivity: No dangerous reaction known under conditions of normal use.

Chemical stability: Stable under recommended storage conditions.

Possibility of hazardous reactions: Vapours may form explosive mixture with air.

:Conditions to avoid

- To avoid thermal decomposition, do not overheat.

- Keep away from flames and sparks.

Incompatible materials: Oxidizing agents

Hazardous decomposition products: Gaseous hydrogen fluoride (HF)., Fluorophosgene; The release of other hazardos product is possible

Provide local ventilation appropriate to the product decomposition risk.

- The substance is stable under recommended storage conditions.

- Keep away from heat and sources of ignition.

- Keep away from flames and sparks.

- To avoid thermal decomposition, do not overheat.

- Take measures to prevent the build up of electrostatic charge.

- Clean and dry piping circuits and equipment before any operations.

- Ensure all equipment is electrically grounded before beginning transfer operations.

Disposal considerations

Product Disposal

- Can be incinerated, when in compliance with local regulations.

- The incinerator must be equipped with a system for the neutralisation or recovery of HF.

- Dispose of in accordance with local regulations.

Advice on cleaning and disposal of packaging

- Empty containers can be landfilled, when in accordance with the local regulations.

Contaminated packaging

- Empty containers can be landfilled, when in accordance with the local regulations.