Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Skin exposure - Remove contaminated clothes. Wash skin with large volumes of water (or soap and water). If irritation persists, or any sign of tissue damage is apparent, obtain medical advice immediately.
Eye exposure - Irrigate copiously with water for at least 10 minutes. Obtain medical advice if any irritation or evidence of tissue damage persists.
Accidental ingestion - Rinse mouth with water. Give up to one tumbler (half pint) of milk or water. Obtain medical advice immediately.
Excessive inhalation - Remove the individual to fresh air and keep at rest. Obtain medical advice immediately.
General comments - As in all cases of potential poisoning, supportive therapy is of the utmost importance.

Fire-fighting measures

In the event of fire, dry powder, carbon dioxide, alcohol-resistant foam or water mist extinguishers should be used. Avoid inhalation of smoke and fumes. In case of insufficient ventilation, wear suitable respiratory equipment.

Accidental release measures

Personal precautions - Gloves (natural rubber if possible) should be worn when handling spillages. Half-mask should be worn when handling spillages. No smoking. Avoid naked flames or other potential sources of ignition (eg. electrical equipment). Avoid skin contamination and inhalation of vapour. Good personal washing routines should be foliowed after accidental releases.
Ensure adequate ventilation in working areas foliowing accidental releases.
Environmental precautions - Do not discharge directly into drains, into soil or into the aquatic environment.
Methods for cleaning up - Any absorbent used for cleaning up spillage should be disposed promptly, preferably by incineration as some cases of spontaneous combustion of rags soaked with similar materials have been reported. Gross spiliages should be contained by the use of sand or inert powder, and disposal of this should be in accordance with Government Regulations.

Handling and storage

Handling - Avoid contact with skin and eyes. Wear suitable gloves (natural rubber is the preferred material) and eye/face protection, an half-mask. No smoking. Avoid naked flames or other potential sources of ignition (eg. electrical equipment). Do not subject to unnecessarily high temperature during processing. Do not ingest or apply to the skin as such. Good personal washing routines should be foliowed. Maintain adequate ventilation in working areas.
Storage - It is good general practice to store in closed, preferably fuli, containers away from heat sources, and protected from extremes of temperature. Do not re-use the empty container.
This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 17(3) for on-site isolated intermediates and, in case the substance is transported to other sites for further processing, the substance should be handled at these sites under the Strictly Controlled Conditions as specified in REACH regulation Article 18(4). Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipement controls in accordance with risk-based management system is available at each manufacturing site.
Written confirmation of application of Strictly Controlled Conditions has been received from every affected Distributor and Downstream Processor/User of the Registrant's intermediate.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
NOR REGULATED
Shipping information
Proper shipping name and description:
NOT REGULATED
Chemical name:
Methyl (1RS,2SR)-2,6,6-trimethyl-3-cyclohexene-1-carboxylate
Language:
English
Labels:
-
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
-
Shipping information
Proper shipping name and description:
NOT REGULATED
Chemical name:
Methyl (1RS,2SR)-2,6,6-trimethyl-3-cyclohexene-1-carboxylate
Language:
English
Labels:
-
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
NOT REGULATED
Shipping information
Proper shipping name and description:
NOT REGULATED
Chemical name:
Methyl (1RS,2SR)-2,6,6-trimethyl-3-cyclohexene-1-carboxylate
Labels:
-
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
NOT REGULATED
Shipping information
Proper shipping name and description:
NOT REGULATED
Chemical name:
Methyl (1RS,2SR)-2,6,6-trimethyl-3-cyclohexene-1-carboxylate
Labels:
-
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

- Exposure controls - Do not subject to unnecessarily high temperature during processing. Maintain adequate ventilation in working areas.
- Personal protection
- Respiratory protection: where ventilation may be inadequate, wear self-contained breathing apparatus.
- Hand protection: where gloves are indicated, natural rubber is the preferred material.
- Eye protection: where eye protection is indicated, safety goggles are recommended.
- Skin protection: depending on working situation these should include wearing protective clothing, which will also limit the odour contamination of personal clothing. Good personal washing routines should be followed.

Stability and reactivity

Good stability at standard temperature. Avoid temperatures above or near to the flash point. Do not heat closed containers. No reaction known with water. Contact with water or storage under recommended conditions for one year should not produce dangerous decomposition products. Avoid contact with oxidizing agents.

Disposal considerations

Residual quantities of the product should be treated according to the instructions given under points 6, 7 and 8 of the SDS. Wastes should be eliminated according to national or regional regulatory requirements currently in force.
The generation of hazardous wastes in terms of quantity and hazardousness should be minimized, by disposing them as close to the source of generation as possible, thus reducing the movement of hazardous wastes.
For the disposal of wastes and packaging material, the services of a licensed waste management company is advised, with recycler, reclaimer, landfill, incinerator or other thermal destruction devices.