Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

General information:
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.

After inhalation:
Supply fresh air and to be sure call for a doctor.
In case of unconsciousness place patient stably in side position for transportation.

After skin contact:
Immediately wash with water and soap and rinse thoroughly.

After eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

After swallowing:
Rinse out mouth and then drink plenty of water.

Most important symptoms and effects, both acute and delayed:
No further relevant information available.

Indication of any immediate medical attention and special treatment needed:
No further relevant information available.

Fire-fighting measures

Extinguishing media
Suitable extinguishing agents:
CO2, powder or water spray.
Fight larger fires with water spray or alcohol resistant foam.
For safety reasons unsuitable extinguishing agents: Water with full jet

Special hazards arising from the substance or mixture
No further relevant information available.

Advice for firefighters
Protective equipment: No special measures required

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
Wear protective equipment.
Keep unprotected persons away.

Environmental precautions:
Inform respective authorities in case of seepage into water course or sewage system.
Do not allow to enter sewers/ surface or ground water.

Methods and material for containment and cleaning up:
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.

Reference to other sections:
Safe handling and storage.
Personal protection equipment.
Disposal information.

Handling and storage

Handling: The substance should be stored and used under conditions of good industrial hygiene and in conformity with any local regulations in order to avoid exposure.
Engineering controls are necessary to reduce exposure to the substance.
When exposure cannot be prevented or adequately controlledappropriate personal protective equipment should be worn.
Such protective equipment should conform to the appropriate international or national standards as follows;
Chemical protective gloves to Standard EN374
Chemical protective clothing to Standard EN368
Eye protection to Standard EN166.
Furthermore, when respiratory protective equipment has to be used, it must be capable of adequately controlling exposure,be suitable for the purpose, and
conform to the appropriate international or national standards, such as a dust mask conforming to EN149, FFP1.
These measures should be regarded as a minimum.

Storage: Store in a dry well-ventilated area, away from sources of ignition.
Keep containers tightly closed when not in use.

Packaging of the substance and or preparation: Open top steel drums / fibreboard boxes, approximately 25 kg per item.

Transport information

Land transport (ADR/RID)

UN number:
UN1325
Shippingopen allclose all
Class:
4.1 Flammable solids, self-reactive substances and solid desensitised explosives.
Packaging group:
II
Labels:
4.1
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
UN1325
Class:
4.1 Flammable solids, self-reactive substances and solid desensitised explosives.
Packaging group:
II
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
UN1325
Class:
4.1 Flammable solids, self-reactive substances and solid desensitised explosives.
Packaging group:
II
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters
Ingredients with limit values that require monitoring at the workplace: Not required.

Additional information:
Recommendations are based on official exposure lists and guidance current at the date of MSDS issue

Exposure controls
Personal protective equipment:
General protective and hygienic measures:
Avoid inhalation of dust
Keep away from foodstuffs, beverages and animal feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Avoid contact with the eyes.
Avoid contact with the eyes and skin.

Respiratory protection: Not required.

Protection of hands:
Protective gloves
The glove material must be impermeable and resistant to the product/ the substance/ the preparation.
In the absence of further information no recommendation for the glove material can be given for the product/the preparation/ the chemical mixture.
Selection of suitable glove material requires consideration of the penetration times, rates of diffusion anddegradation under conditions of use

Material of gloves
The selection of suitable gloves does not only depend on the material, but also on manufactured quality and varies from manufacturer to manufacturer.

Penetration time of glove material
The exact break through times can be provided by the manufacturer of the protective gloves, and must be observed.

Eye protection:
Tightly sealed goggles

Stability and reactivity

Reactivity

Chemical stability
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.

Possibility of hazardous reactions No dangerous reactions known.

Conditions to avoid Prolonged exposure to heat

Incompatible materials:
Reducing agents
Oxidising agents

Hazardous decomposition products: No dangerous decomposition products known

Disposal considerations

Waste treatment methods

Recommendation
Must not be disposed together with household garbage. Do not allow product to reach sewage system.

European waste catalogue:
04 02 16*: Dyestuffs and pigments containing dangerous substances.

Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.