Registration Dossier

Administrative data

First-aid measures

First-Aid Measures:

Description of first aid measures
If adverse health effects develop seek medical attention.

If inhaled:
not relevant.

On skin contact:
After contact with skin, wash immediately with plenty of water.

On contact with eyes:
In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water. Seek medical attention if necessary.

On ingestion:
Rinse mouth and then drink 200-300 ml of water.

Most important symptoms and effects, both acute and delayed
Symptoms: No significant symptoms are expected due to the non-classification of the product.

Indication of any immediate medical attention and special treatment needed
Treatment: Treat symptomatically.

Fire-fighting measures

Fire-Fighting Measures:

Extinguishing media
Suitable extinguishing media:
water spray, carbon dioxide, dry powder, foam

Special hazards arising from the substance or mixture
harmful vapours
Evolution of fumes/fog. The substances/groups of substances mentioned can be released in case of fire.

Advice for fire-fighters
Special protective equipment:
Wear a self-contained breathing apparatus.

Further information:
Dispose of fire debris and contaminated extinguishing water in accordance with official regulations.

Accidental release measures

Accidental Release Measures:

Personal precautions, protective equipment and emergency procedures
Use personal protective clothing.

Environmental precautions
Do not discharge into drains/surface waters/groundwater.

Methods and material for containment and cleaning up
For small amounts: Pick up with suitable absorbent material.
For large amounts: Dike spillage. Pump off product.
Dispose of absorbed material in accordance with regulations.

Handling and storage

Handling and Storage:

Precautions for safe handling
Handle in accordance with good industrial hygiene and safety practice.

Protection against fire and explosion:
Take precautionary measures against static discharges. Avoid all sources of ignition: heat, sparks, open flame.

Conditions for safe storage, including any incompatibilities

Suitable materials for containers: tin (tinplate), glass, High density polyethylene (HDPE), carbon steel (iron)
Further information on storage conditions: Keep container tightly closed and dry; store in a cool place.
Below temperature limit the product properties will change. The property change is reversible by stirring and heating. Protect against moisture. Please refer to the product specific data sheet for further information.

Storage stability:
Storage temperature: <= 30 °C

Protect from temperatures below: 20 °C
Characteristics of the product are reversibly changed when falling below the limit temperature.
Protect from temperatures above: 30 °C
Properties of the product change irreversibly on exceeding the limit temperature.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure Controls/Personal Protection:

Control parameters

Components with workplace control parameters

No occupational exposure limits known.

PNEC
No PNEC value available.

DNEL
No DNEL value available.


Exposure controls
Personal protective equipment
Hand protection:
Not needed.

Eye protection:
Safety glasses with side-shields (frame goggles) (e.g. EN 166)

General safety and hygiene measures
Handle in accordance with good industrial hygiene and safety practice.

Stability and reactivity

Stability and Reactivity:

Reactivity
No hazardous reactions if stored and handled as prescribed/indicated.

Chemical stability
The product is stable if stored and handled as prescribed/indicated.

Possibility of hazardous reactions
None if used for intended purpose.

Conditions to avoid
See MSDS section 7 - Handling and storage.

Incompatible materials

Substances to avoid:
No substances known that should be avoided.

Hazardous decomposition products

Hazardous decomposition products:
No hazardous decomposition products if stored and handled as prescribed/indicated.

Disposal considerations

Disposal Considerations:

Waste treatment methods

Must be disposed of or incinerated in accordance with local regulations.

Contaminated packaging:
Uncontaminated packaging can be re-used.
Packs that cannot be cleaned should be disposed of in the same manner as the contents.