Registration Dossier

Manufacture, use & exposure

Uses at industrial sites

Documentsopen allclose all

Uses at industrial sites

Contributing activity / technique for the environmentopen allclose all
Environmental release category (ERC):
ERC12a: Processing of articles at industrial sites with low release
Environmental release category (ERC):
ERC12b: Processing of articles at industrial sites with high release
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 21: Low energy manipulation of substances bound in materials and/or articles
Process category (PROC):
PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Product category used:
PC 1: Adhesives, sealants
PC 9a: Coatings and paints, thinners, paint removes
PC 9b: Fillers, putties, plasters, modelling clay
PC 18: Ink and toners
PC 32: Polymer preparations and compounds
Substance supplied to that use in form of:
in a mixture
Subsequent service life relevant for this use:
yes
Related assessment:
use assessed in a joint CSR

Uses at industrial sites

Contributing activity / technique for the environment
Name of activity / technique:
Exposure from use of printing inks at industrial sites
Environmental release category (ERC):
ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
Name of activity / technique:
Printing of paper in continuous process
Process category (PROC):
PROC 6: Calendering operations
Name of activity / technique:
Transfer of printing inks/materials for charging and discharging at industrial sites without dedicated engineering controls in place (non-dedicated facilities)
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Name of activity / technique:
Transfer of substance or preparations/mixtures of printing inks into small containers including weighing using dedicated filling lines
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Name of activity / technique:
Use of pure substance or preparations/mixtures of printing inks in laboratory activities at industrial sites
Process category (PROC):
PROC 15: Use as laboratory reagent
Product category used:
PC 18: Ink and toners
Sector of end use:
SU 6b: Manufacture of pulp, paper and paper products
SU 7: Printing and reproduction of recorded media
Substance supplied to that use in form of:
in a mixture
Subsequent service life relevant for this use:
yes
Related assessment:
use assessed in an own CSR

Uses at industrial sites

Contributing activity / technique for the environment
Name of activity / technique:
Exposure from the industrial production of tyres
Environmental release category (ERC):
ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
Name of activity / technique:
Curing/vulcanisation
Process category (PROC):
PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Name of activity / technique:
Assembly/building and shaping of green tyre - pre-curing activities
Process category (PROC):
PROC 21: Low energy manipulation of substances bound in materials and/or articles
Product category used:
PC 32: Polymer preparations and compounds
Sector of end use:
SU 11: Manufacture of rubber products
SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
Substance supplied to that use in form of:
in a mixture
Subsequent service life relevant for this use:
yes
Related assessment:
use assessed in an own CSR

Uses at industrial sites

Contributing activity / technique for the environment
Environmental release category (ERC):
ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 7: Industrial spraying
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 10: Roller application or brushing
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Process category (PROC):
PROC 15: Use as laboratory reagent
Product category used:
PC 1: Adhesives, sealants
Substance supplied to that use in form of:
in a mixture
Subsequent service life relevant for this use:
yes

Uses at industrial sites

Registration/ Notification status for the use:
use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
Name of activity / technique:
Use of functional fluid at industrial site
Environmental release category (ERC):
ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
Name of activity / technique:
Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment condition
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
Mixing or blending in batch processes
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Name of activity / technique:
Industrial spraying
Process category (PROC):
PROC 7: Industrial spraying
Name of activity / technique:
Transfer of substance or mixture (charging/discharging) at non dedicated-facilities
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Name of activity / technique:
Transfer of substance or mixture (charging/discharging) at dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Name of activity / technique:
Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Name of activity / technique:
Roller application or brushing
Process category (PROC):
PROC 10: Roller application or brushing
Product category used:
PC 1: Adhesives, sealants
PC 9a: Coatings and paints, thinners, paint removes
PC 21: Laboratory chemicals
PC 27: Plant protection products
PC 32: Polymer preparations and compounds
Sector of end use:
SU 2b: Offshore industries
SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
SU 9: Manufacture of fine chemicals
SU 12: Manufacture of plastics products, including compounding and conversion
SU 19: Building and construction work
Subsequent service life relevant for this use:
no
Related assessment:
use assessed in an own CSR

Contributing scenario for the environment (related to workers activities)

Conditions of use for the environment

Conditions and measures related to Biological Sewage Treatment Plant

Biological Sewage Treatment Plant (STP):
municipal biological STP

Conditions and measures related to external treatment of waste (including article waste)

Particular considerations on the waste treatment operations:
other:

Other conditions affecting environmental exposure

Releases to waste and the environment

Release to the environment

ReleaseEnvirRepopen allclose all
Release from the site to::
wastewater
Release estimation method:
estimated release factor
Release from the site to::
ambient air
Release estimation method:
estimated release factor
Release from the site to::
non-agricultural soil
Release estimation method:
estimated release factor

Exposure of the environment

PECopen allclose all
Exposed compartment:
freshwater
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
EUSES
Exposed compartment:
sediment (freshwater)
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
EUSES
Exposed compartment:
marine water
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
EUSES
Exposed compartment:
sediment (marine water)
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
EUSES
Exposed compartment:
sewage treatment plant
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
EUSES
Exposed compartment:
air
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
EUSES
Exposed compartment:
agricultural soil
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
EUSES
Exposed compartment:
predators' prey (freshwater)
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
EUSES
Exposed compartment:
predators' prey (marine water)
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
EUSES
Exposed compartment:
top predators' prey (marine water)
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
EUSES
Exposed compartment:
predators' prey (terrestrial)
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
EUSES

Exposure of humans via the environment

Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
EUSES
ContribScenWorkersRepopen allclose all

Contributing scenario for the workers

Conditions of use for workers

Product (article) characteristics

Physical form of the used product:
liquid, including paste/slurry/suspension

Amounts used (or contained in articles), frequency and duration of use/exposure

Technical and organisational conditions and measures

TechCondRepopen allclose all
Effectiveness
Route affected:
inhalation
EffectivenessRepopen allclose all
Route affected:
inhalation
Route affected:
dermal

Conditions and measures related to personal protection, hygiene and health evaluation

PPERepopen allclose all
Effectiveness
Route affected:
inhalation
Effectiveness
Route affected:
dermal

Other conditions affecting workers exposure

Place of use:
indoor

Exposure of workers

ExpEstopen allclose all
Type of exposure:
inhalation (external) long-term exposure
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers
Type of exposure:
inhalation (external) short-term exposure
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers
Type of exposure:
dermal (external) long-term exposure
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers
Type of exposure:
dermal (external) local concentration on skin
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers

Contributing scenario for the workers

Conditions of use for workers

Product (article) characteristics

Physical form of the used product:
liquid, including paste/slurry/suspension

Amounts used (or contained in articles), frequency and duration of use/exposure

Technical and organisational conditions and measures

TechCondRepopen allclose all
Effectiveness
Route affected:
inhalation
EffectivenessRepopen allclose all
Route affected:
inhalation
Route affected:
dermal

Conditions and measures related to personal protection, hygiene and health evaluation

PPERepopen allclose all
Effectiveness
Route affected:
inhalation
Effectiveness
Route affected:
dermal

Other conditions affecting workers exposure

Place of use:
indoor

Exposure of workers

ExpEstopen allclose all
Type of exposure:
inhalation (external) long-term exposure
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers
Type of exposure:
inhalation (external) short-term exposure
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers
Type of exposure:
dermal (external) long-term exposure
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers
Type of exposure:
dermal (external) local concentration on skin
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers

Contributing scenario for the workers

Conditions of use for workers

Product (article) characteristics

Physical form of the used product:
liquid, including paste/slurry/suspension

Amounts used (or contained in articles), frequency and duration of use/exposure

Technical and organisational conditions and measures

TechCondRepopen allclose all
Effectiveness
Route affected:
inhalation
EffectivenessRepopen allclose all
Route affected:
inhalation
Route affected:
dermal

Conditions and measures related to personal protection, hygiene and health evaluation

PPERepopen allclose all
Effectiveness
Route affected:
inhalation
Effectiveness
Route affected:
dermal

Other conditions affecting workers exposure

Place of use:
indoor

Exposure of workers

ExpEstopen allclose all
Type of exposure:
inhalation (external) long-term exposure
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers
Type of exposure:
inhalation (external) short-term exposure
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers
Type of exposure:
dermal (external) long-term exposure
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers
Type of exposure:
dermal (external) local concentration on skin
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers

Contributing scenario for the workers

Conditions of use for workers

Product (article) characteristics

Physical form of the used product:
liquid, including paste/slurry/suspension

Amounts used (or contained in articles), frequency and duration of use/exposure

Technical and organisational conditions and measures

TechCondRepopen allclose all
Effectiveness
Route affected:
inhalation
EffectivenessRepopen allclose all
Route affected:
inhalation
Route affected:
dermal

Conditions and measures related to personal protection, hygiene and health evaluation

PPERepopen allclose all
Effectiveness
Route affected:
inhalation
Effectiveness
Route affected:
dermal

Other conditions affecting workers exposure

Place of use:
indoor

Exposure of workers

ExpEstopen allclose all
Type of exposure:
inhalation (external) long-term exposure
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers
Type of exposure:
inhalation (external) short-term exposure
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers
Type of exposure:
dermal (external) long-term exposure
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers
Type of exposure:
dermal (external) local concentration on skin
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers

Contributing scenario for the workers

Conditions of use for workers

Product (article) characteristics

Physical form of the used product:
liquid, including paste/slurry/suspension

Amounts used (or contained in articles), frequency and duration of use/exposure

Technical and organisational conditions and measures

TechCondRepopen allclose all
Effectiveness
Route affected:
inhalation
EffectivenessRepopen allclose all
Route affected:
inhalation
Route affected:
dermal

Conditions and measures related to personal protection, hygiene and health evaluation

PPERepopen allclose all
Effectiveness
Route affected:
inhalation
Effectiveness
Route affected:
dermal

Other conditions affecting workers exposure

Place of use:
indoor

Exposure of workers

ExpEstopen allclose all
Type of exposure:
inhalation (external) long-term exposure
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers
Type of exposure:
inhalation (external) short-term exposure
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers
Type of exposure:
dermal (external) long-term exposure
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers
Type of exposure:
dermal (external) local concentration on skin
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers

Contributing scenario for the workers

Conditions of use for workers

Product (article) characteristics

Physical form of the used product:
liquid, including paste/slurry/suspension

Amounts used (or contained in articles), frequency and duration of use/exposure

Technical and organisational conditions and measures

TechCondRepopen allclose all
Effectiveness
Route affected:
inhalation
EffectivenessRepopen allclose all
Route affected:
inhalation
Route affected:
dermal

Conditions and measures related to personal protection, hygiene and health evaluation

PPERepopen allclose all
Effectiveness
Route affected:
inhalation
Effectiveness
Route affected:
dermal

Other conditions affecting workers exposure

Place of use:
indoor

Exposure of workers

ExpEstopen allclose all
Type of exposure:
inhalation (external) long-term exposure
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers
Type of exposure:
inhalation (external) short-term exposure
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers
Type of exposure:
dermal (external) long-term exposure
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers
Type of exposure:
dermal (external) local concentration on skin
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers

Contributing scenario for the workers

Conditions of use for workers

Product (article) characteristics

Physical form of the used product:
liquid, including paste/slurry/suspension

Amounts used (or contained in articles), frequency and duration of use/exposure

Technical and organisational conditions and measures

TechCondRepopen allclose all
Effectiveness
Route affected:
inhalation
EffectivenessRepopen allclose all
Route affected:
inhalation
Route affected:
dermal

Conditions and measures related to personal protection, hygiene and health evaluation

PPERepopen allclose all
Effectiveness
Route affected:
inhalation
Effectiveness
Route affected:
dermal

Other conditions affecting workers exposure

Place of use:
indoor

Exposure of workers

ExpEstopen allclose all
Type of exposure:
inhalation (external) long-term exposure
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers
Type of exposure:
inhalation (external) short-term exposure
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers
Type of exposure:
dermal (external) long-term exposure
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers
Type of exposure:
dermal (external) local concentration on skin
Exposure estimation method:
exposure estimation tool
Exposure estimation tool name:
ECETOC TRA workers

Uses at industrial sites

Contributing activity / technique for the environment
Name of activity / technique:
Exposure from use of adhesives at industrial sites
Environmental release category (ERC):
ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
Name of activity / technique:
Use of adhesives/materials at industrial sites in closed continuous processes with only occasional controlled exposure
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
Use of adhesives/materials at industrial sites in processes with opportunity of exposure (process design does not exclude exposure)
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Name of activity / technique:
Use of adhesives/materials at industrial sites in batch processes (mixing or blending)
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Name of activity / technique:
Application of adhesives by spraying under industrial operating conditions - High compressed air use with moderate application rate and spraying in any direction (including upward) - RPE required
Process category (PROC):
PROC 7: Industrial spraying
Name of activity / technique:
Application of adhesives by spraying under industrial operating conditions - No or low compressed air use with moderate application rate and spraying only horizontal or downward - RPE not required
Process category (PROC):
PROC 7: Industrial spraying
Name of activity / technique:
Transfer of substance or preparations/mixtures of adhesives for charging and discharging at industrial sites without dedicated engineering controls in place (non-dedicated facilities)
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Name of activity / technique:
Transfer of substance or preparations/mixtures of adhesives for charging and discharging at industrial sites using dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Name of activity / technique:
Transfer of substance or preparations/mixtures of adhesives at industrial sites into small containers including weighing using dedicated filling lines
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Name of activity / technique:
Application of adhesives (low energy) by roller, brush, spreader under industrial operating conditions
Process category (PROC):
PROC 10: Roller application or brushing
Name of activity / technique:
Application of adhesives by dipping under industrial operating conditions
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Name of activity / technique:
Application of adhesives by pouring under industrial operating conditions
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Name of activity / technique:
Use of pure substance or preparations/mixtures of adhesives in laboratory activities at industrial sites
Process category (PROC):
PROC 15: Use as laboratory reagent
Product category used:
PC 1: Adhesives, sealants
PC 9b: Fillers, putties, plasters, modelling clay
Sector of end use:
SU 6a: Manufacture of wood and wood products
SU 6b: Manufacture of pulp, paper and paper products
SU 16: Manufacture of computer, electronic and optical products, electrical equipment
SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
SU 18: Manufacture of furniture
Substance supplied to that use in form of:
in a mixture
Subsequent service life relevant for this use:
yes
Related assessment:
use assessed in an own CSR

Uses at industrial sites

Contributing activity / technique for the environment
Environmental release category (ERC):
ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 7: Industrial spraying
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 10: Roller application or brushing
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Process category (PROC):
PROC 15: Use as laboratory reagent
Product category used:
PC 9a: Coatings and paints, thinners, paint removes
PC 9b: Fillers, putties, plasters, modelling clay
Substance supplied to that use in form of:
in a mixture
Subsequent service life relevant for this use:
yes

Uses at industrial sites

Contributing activity / technique for the environment
Environmental release category (ERC):
ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 10: Roller application or brushing
Process category (PROC):
PROC 15: Use as laboratory reagent
Product category used:
PC 18: Ink and toners
Substance supplied to that use in form of:
in a mixture
Subsequent service life relevant for this use:
yes

Uses at industrial sites

Contributing activity / technique for the environment
Name of activity / technique:
Exposure from use of coatings at industrial sites
Environmental release category (ERC):
ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
Name of activity / technique:
Processing of coatings/materials at industrial sites in high integrity closed systems with no likelihood of exposure
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Name of activity / technique:
Use of coatings/materials at industrial sites in closed continuous processes with only occasional controlled exposure
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
Use of coatings/materials at industrial sites in closed batch processes with occasional controlled exposure
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
Use of coatings/materials at industrial sites in batch processes (mixing or blending)
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Name of activity / technique:
Application of coatings by spraying under industrial operating conditions - High compressed air use with moderate application rate and spraying in any direction (including upward)
Process category (PROC):
PROC 7: Industrial spraying
Name of activity / technique:
Application of coatings by spraying under industrial operating conditions - High compressed air use with moderate application rate and spraying only horizontal or downward
Process category (PROC):
PROC 7: Industrial spraying
Name of activity / technique:
Application of coatings by spraying under industrial operating conditions - No or low compressed air use with moderate application rate and spraying in any direction (including upward)
Process category (PROC):
PROC 7: Industrial spraying
Name of activity / technique:
Transfer of coatings/materials for charging and discharging at industrial sites without dedicated engineering controls in place (non-dedicated facilities)
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Name of activity / technique:
Transfer of substance or preparations/mixtures of coatings for charging and discharging at industrial sites using dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Name of activity / technique:
Application of coatings by roller, spreader, flow coating under industrial operating conditions
Process category (PROC):
PROC 10: Roller application or brushing
Name of activity / technique:
Application of coatings by dipping under industrial operating conditions
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Name of activity / technique:
Application of coatings by pouring under industrial operating conditions
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Name of activity / technique:
Use of pure substance or preparations/mixtures of coatings in laboratory activities at industrial sites
Process category (PROC):
PROC 15: Use as laboratory reagent
Product category used:
PC 9a: Coatings and paints, thinners, paint removes
Sector of end use:
SU 6a: Manufacture of wood and wood products
SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
SU 16: Manufacture of computer, electronic and optical products, electrical equipment
SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
SU 18: Manufacture of furniture
SU 19: Building and construction work
Substance supplied to that use in form of:
in a mixture
Subsequent service life relevant for this use:
yes
Related assessment:
use assessed in an own CSR