Registration Dossier

Physical & Chemical properties

Flash point

Currently viewing:

Administrative data

Link to relevant study record(s)

Referenceopen allclose all

Endpoint:
flash point of flammable liquids
Type of information:
other: data obtained from Pers. Comm.
Adequacy of study:
weight of evidence
Reliability:
4 (not assignable)
Rationale for reliability incl. deficiencies:
secondary literature
Qualifier:
equivalent or similar to guideline
Guideline:
ISO 2719 (Determination of flash point - Pensky-Martens closed cup method)
Version / remarks:
2002. Remark: DIN 51758
Deviations:
not specified
GLP compliance:
not specified
Type of method:
closed cup
Flash point apparatus:
Pensky-Martens apparatus
Flash point:
> 100 °C
Atm. press.:
ca. 101.3 kPa
Interpretation of results:
GHS criteria not met
Conclusions:
A flash point value of >100°C was reported in a secondary source to which reliability could not be assigned.
Endpoint:
flash point of flammable liquids
Type of information:
other: data obtained from pers. comm.
Adequacy of study:
weight of evidence
Reliability:
4 (not assignable)
Rationale for reliability incl. deficiencies:
secondary literature
Qualifier:
equivalent or similar to guideline
Guideline:
ISO 2719 (Determination of flash point - Pensky-Martens closed cup method)
Version / remarks:
2002. Remark: ASTM D93
Deviations:
not specified
GLP compliance:
not specified
Type of method:
closed cup
Flash point apparatus:
Pensky-Martens apparatus
Flash point:
100 °C
Atm. press.:
ca. 101.3 kPa
Interpretation of results:
GHS criteria not met
Conclusions:
A flash point value of 100°C was reported in a secondary source to which reliability could not be assigned.
Endpoint:
flash point of flammable liquids
Type of information:
other: data obtained from MSDS
Adequacy of study:
weight of evidence
Reliability:
4 (not assignable)
Rationale for reliability incl. deficiencies:
secondary literature
Qualifier:
equivalent or similar to guideline
Guideline:
ISO 2719 (Determination of flash point - Pensky-Martens closed cup method)
Version / remarks:
2002
Deviations:
not specified
GLP compliance:
not specified
Type of method:
closed cup
Flash point apparatus:
Pensky-Martens apparatus
Flash point:
110 °C
Atm. press.:
1 013 hPa
Interpretation of results:
GHS criteria not met
Conclusions:
A flash point value of 110°C was reported for the substance in a secondary source to which reliability could not be assigned.

Description of key information

Flash point: 100-110°C at 1013 hPa (closed cup, based on weight of evidence)

Key value for chemical safety assessment

Flash point at 101 325 Pa:
100 °C

Additional information

The registrant intends to perform a new flash point study for 3-trimethoxysilylpropyl methacrylate (CAS 2530-85-0). The results will be added to the dossier and updated through a voluntary update when the study becomes available.

Several measured flash points are available from secondary sources to which reliability could not be assigned. Those measurements known to have been conducted according to international or national standard closed-cup methods are in the range of 100 - 110°C. Variations in the flash point values may be caused by variations in purity of the test substance and in the test method used. These values are taken as weight of evidence in the interim, until the new study is available.

A flash point of 100 to 110°C and a measured boiling point of 253°C, indicate that the substance should not be classified as a flammable liquid according to the criteria of Regulation (EC) No. 1272/2008.