Registration Dossier

Physical & Chemical properties

Flammability

Currently viewing:

Administrative data

Endpoint:
flammability
Type of information:
experimental study
Adequacy of study:
key study
Study period:
20 October 2011 - 4 April 2012
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
other: According to EU method A.9 and DIN EN ISO 2719

Data source

Reference
Reference Type:
study report
Title:
Unnamed
Year:
2012
Report Date:
2012

Materials and methods

Test guideline
Qualifier:
according to
Guideline:
other: EU method A.9 and DIN EN ISO 2719
Principles of method if other than guideline:
Flash point determination (see section 4.11).

Test material

Reference
Name:
Unnamed
Type:
Constituent

Results and discussion

Pyrophoric solids
Test procedure:
ignition time on contact with air
Remarks:
Ignition on contact with air refers to either Pyrophoric solids or Pyrophoric liquids depending on physical state (migrated information).
Remarks on result:
no ignition on contact with air (not further specified)
Remarks:
corresponding to 'no' in migrated source record.
Pyrophoric liquids
Test procedure:
ignition time on contact with air
Remarks:
Ignition on contact with air refers to either Pyrophoric solids or Pyrophoric liquids depending on physical state (migrated information).
Remarks on result:
no ignition on contact with air (not further specified)
Remarks:
corresponding to 'no' in migrated source record.
Substances / mixtures which in contact with water emit flammable gases
Remarks on result:
no reaction with water observed
Remarks:
corresponding to 'no' in migrated source record.

Any other information on results incl. tables

The flash point of the test item is 165 +/- 5 °C at 101.3 kPa.

Applicant's summary and conclusion

Interpretation of results:
non flammable
Remarks:
Migrated information
Conclusions:
The test item is not highly flammable.
Executive summary:

The test item is liquid at room temperature. Therefore, the methods for the determination of the flammability of solids are not suitable. Accordingly, the flash point of the test item was determined according to EU method A.9 and DIN EN ISO 2719. The flash point of the test item is 165 +/- 5 °C at 101.3 kPa. Therefore, the test item is not highly flammable and does not have to be classified for flammability according to Regulation (EC) 2008/1272.