Registration Dossier

Diss Factsheets

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Description of first aid measures

General information

Seek medical assistance if discomfort continues

After inhalation

Remove the casualty into fresh air and keep him calm.

After contact with skin

In case of contact with skin, clean with soap and water.

After contact with eyes

Rinse the affected eye with plenty of water, at the same time keep the unaffected eye well

protected.

After ingestion

If swallowed do not induce vomiting, seek medical advice and show safety data sheet or label

Most important symptoms and effects, both acute and delayed

No symptoms known currently

No hazards knwon at this time

Indication of any immediate medical attention and special treatment needed

Treat symptomatically

Fire-fighting measures

Suitable extinguishing media

water spray jet

foam

Extinguishing media that must not be used for safety reasons

Full water jet

carbon dioxide

dry powder

Special hazards from the substance itself, its combustion products or from its vapours

In the event of fire the following can be released:

Nitrous gases (NOx)

Carbon dioxide (CO2)

Carbon monoxide (CO)

Hydrogen fluoride (HF)

Special protective equipment for firefighting

Use self-contained breathing apparatus

Accidental release measures

Personal precautions

Use personal protective clothing.

Environmental precautions

Do not allow entry to drains, water courses or soil

Methods for cleaning up/taking up

Take up mechanically

Avoid dust formation and electrical charging (sparking) because dust explosion might occur.

When picked up, product should be be taken to a suitable and authorized waste disposal site in

accordance with relevant regulations and if necessary after consultation with the waste

disposal operator and/or the competent Authorities

Additional information

Collect spilled product completely.

Handling and storage

Advice on safe handling

When used and handled appropriately no special measures are needed

Avoid dust formation.

Advice on protection against fire and explosion

Take precautionary measures against electrostatic charges - earthing necessary during loading operations.

Keep away from sources of ignition

Dust can form an explosive mixture with air.

Further information on storage conditions

Keep container dry

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Occupational exposure controls

General protective measures

Observe the usual precautions for handling chemicals.

Hygiene measures

Wash hands before breaks and after work.

Use barrier skin cream.

Remove soiled or soaked clothing immediately and clean thoroughly before using again.

Respiratory protection : Wear dust mask when handling large quantities

Hand protection : Nitrile rubber gloves.

Minimum breakthrough time (glove): not determined

Minimum thickness (glove): not determined

Observe the information of the glove manufacturers on permeability and breakthrough times and other workplace requirements

Eye protection : safety glasses

Body protection : working clothes

Stability and reactivity

Thermal decomposition : from 324 °C

Method : DTA

Hazardous reactions

When handled and stored appropriately no dangerous reactions are known

Hazardous decomposition products

When handled and stored appropriately, no dangerous decomposition products are known

Materials to avoid

Strong oxidizers

Disposal considerations

Product

Product should be be taken to a suitable and authorized waste disposal site in

accordance with relevant regulations and if necessary after consultation with the waste

disposal operator and/or the competent Authorities

Uncleaned packaging

Packaging that cannot be cleaned should be disposed of as product waste