Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 201-128-1 | CAS number: 78-63-7
Density
Administrative data
Link to relevant study record(s)
- Endpoint:
- relative density
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- November 11, 2010
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: Well conducted study, under Internal management system and according to EU and OECD guidelines. Certificate of analysis included in the report.
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.3 (Relative Density)
- Version / remarks:
- May 31, 2008
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 109 (Density of Liquids and Solids)
- Version / remarks:
- July 27, 1995
- Deviations:
- no
- GLP compliance:
- no
- Remarks:
- Internal management system
- Type of method:
- oscillating densitimeter
- Type:
- relative density
- Density:
- 0.872 g/cm³
- Temp.:
- 20 °C
- Remarks on result:
- other: The standard deviation is ± 0.0001 g/cm3.
- Conclusions:
- The density of di-tert-butyl 1,1,4,4-tetramethylene diperoxide at 20°C is 0.872 g/cm3 (± 0.0001 g/cm3).
- Executive summary:
Thedensity of di-tert-butyl 1,1,4,4-tetramethylene diperoxide was determined according to EC Regulation No 440/2008, Guideline A.3 and according to OECD Guideline 109 , and in accordance with European Chemicals Agency (ECHA), Guidance on information requirements and chemical safety assessment, Chapter R.7a, Endpoint specific guidance, May 2008.
The density of di-tert-butyl 1,1,4,4-tetramethylene diperoxide at 20°C is 0.872 g/cm3 (± 0.0001 g/cm3).
Reference
Density test substance
Measured density of the test substance at 20°C:
Measurement 1: 0.8719 g/cm3
Measurement 2: 0.8720 g/cm3
Measurement 3: 0.8720 g/cm3
Mean value at 20°C is 0.872 g/cm3. The standard deviation is ± 0.0001 g/cm3.
Description of key information
The density of di-tert-butyl 1,1,4,4-tetramethylene diperoxide at 20°C is 0.872 g/cm3.
Key value for chemical safety assessment
- Relative density at 20C:
- 0.872
Additional information
This figure is supported by:
78-63-7, Density, Pergan, Zielaskowski, 2008, SS
The density of di-tert-butyl 1,1,4,4-tetramethylene diperoxide at 20°C is 0.872 g/cm3.
78-63-7, Density, Mageli,1963,SS
The density of di-tert-butyl 1,1,4,4-tetramethylene diperoxide at 20°C is 0.873 g/cm3.
78-63-7, Density,ACD labs, SS
The density of di-tert-butyl 1,1,4,4-tetramethylene diperoxide at 20°C is 0.852 -0.972 g/cm3.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
