[[(phosphonomethyl)imino]bis[ethane-2,1-diylnitrilobis(methylene)]]tetrakisphosphonic acid

Flammability

Link to relevant study record(s)

Reference

Endpoint:

flammable solids

Type of information:

experimental study

Adequacy of study:

key study

Study period:

Testing was conducted between 31 March 2010 and 24 August 2010.

Reliability:

1 (reliable without restriction)

Rationale for reliability incl. deficiencies:

guideline study

Qualifier:

according to guideline

Guideline:

EU Method A.10 (Flammability (Solids))

Deviations:

no

GLP compliance:

yes

Key result

Test procedure:

burning rate test: preliminary screening test

Burning time:

2 min

Moisture (wt %):

1.635

Remarks on result:

substance does not ignite and propagate combustion either by burning with flame or smouldering along 200 mm of the powder train within the 2 minutes test period

Results

Preliminary screening test

The pile failed to ignite during the two minutes that the Bunsen flame was applied.

The result of the preliminary screening test obviated the need to perform the main test.

Moisture content

Table 5.1

	Determination A	Determination B
a) Mass of loss bottle (g)	19.8681	18.6811
b) Mass of loss bottle and test item (g)	20.8361	19.6405
c) Mass of loss bottle and test item    after drying (g)	20.8204	19.6247
Moisture content (% w/w)	1.622	1.647
Mean moisture content (% w/w)	1.635

Interpretation of results:

GHS criteria not met

Conclusions:

The test item has been determined to be not highly flammable as it failed to ignite in the preliminary screening test.

Executive summary:

Two physico-chemical properties of the test item have been determined.

Methods employed are designed to be compatible with those specified in Commission Regulation (EC) No 440/2008 of 30 May 2008, Part A: Methods for the determination of physico-chemical properties.

Method

The flammability (solids) was determined by measuring the burning rate of test item prepared as a pile of set dimensions. Testing was conducted using a method designed to be compatible with Method A10 Flammability (Solids) ofCommissionRegulation (EC) No 440/2008 of 30 May 2008.

Conclusion

The test item has been determined to be not highly flammable as it failed to ignite in the preliminary screening test.

Description of key information

Flammability: Non flammable

Key value for chemical safety assessment

Flammability:

not classified

Additional information

DTPMP-H is involatile and is demonstrated to have high melting temperature of 450°C. The requirement to test the substance for pyrophoricity and flammability in contact with water was waived in accordance with Section 1 of REACH Annex IX, because there is no indication on the basis of structure and experience in use and handling that the substance is pyrophoric (flammable in contact with air) or flammable in contact with water.

 

Preliminary screening study was performed with DTPMP acid according to test method A.10 flammability of solids. The result indicate that DTPMP-H failed to ignite and no further testing was performed.

Justification for classification or non-classification

DTPMP-H is not classified for flammability. The substance failed to ignite in preliminary screening studies performed in accordance with EU test method A.10.