Registration Dossier

Manufacture, use & exposure

Uses at industrial sites

Documentsopen allclose all

Uses at industrial sites

Contributing activity / technique for the environmentopen allclose all
Environmental release category (ERC):
ERC5: Use at industrial site leading to inclusion into/onto article
Environmental release category (ERC):
ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 7: Industrial spraying
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Process category (PROC):
PROC 26: Handling of solid inorganic substances at ambient temperature
Product category used:
PC 12: Fertilisers
Sector of end use:
SU 1: Agriculture, forestry and fishing
SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no

Uses at industrial sites

Contributing activity / technique for the environment
Environmental release category (ERC):
ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 15: Use as laboratory reagent
Product category used:
PC 19: Intermediate
PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
PC 21: Laboratory chemicals
Sector of end use:
SU 24: Scientific research and development
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no

Uses at industrial sites

Contributing activity / technique for the environmentopen allclose all
Environmental release category (ERC):
ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Environmental release category (ERC):
ERC6a: Use of intermediate
Environmental release category (ERC):
ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 7: Industrial spraying
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Process category (PROC):
PROC 10: Roller application or brushing
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Process category (PROC):
PROC 15: Use as laboratory reagent
Process category (PROC):
PROC 25: Other hot work operations with metals
Product category used:
PC 14: Metal surface treatment products
Sector of end use:
SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
SU 14: Manufacture of basic metals, including alloys
SU 16: Manufacture of computer, electronic and optical products, electrical equipment
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
yes

Uses at industrial sites

Registration/ Notification status for the use:
use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
Name of activity / technique:
E-GES-DU(U)1.1(ERC6b).
Environmental release category (ERC):
ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Process category (PROC):
PROC 10: Roller application or brushing
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Process category (PROC):
PROC 21: Low energy manipulation of substances bound in materials and/or articles
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 7: Industrial spraying
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 10: Roller application or brushing
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 15: Use as laboratory reagent
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 15: Use as laboratory reagent
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 15: Use as laboratory reagent
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 15: Use as laboratory reagent
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 17: Lubrication at high energy conditions in metal working operations
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 19: Hand-mixing with intimate contact and only PPE available.
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 19: Hand-mixing with intimate contact and only PPE available.
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 19: Hand-mixing with intimate contact and only PPE available.
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 19: Hand-mixing with intimate contact and only PPE available.
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 20: Use of functional fluids in small devices
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 21: Low energy manipulation of substances bound in materials and/or articles
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 25: Other hot work operations with metals
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 25: Other hot work operations with metals
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 25: Other hot work operations with metals
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 26: Handling of solid inorganic substances at ambient temperature
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 26: Handling of solid inorganic substances at ambient temperature
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 26: Handling of solid inorganic substances at ambient temperature
Product category used:
PC 19: Intermediate
Sector of end use:
SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
SU 9: Manufacture of fine chemicals
SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no

Uses at industrial sites

Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Process category (PROC):
PROC 21: Low energy manipulation of substances bound in materials and/or articles
Product category used:
PC 0: Other: Colouring agents, pigments
Sector of end use:
SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
SU 9: Manufacture of fine chemicals
SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
SU 19: Building and construction work
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
yes

Uses at industrial sites

Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Product category used:
PC 0: Other: Colouring agents, pigments
Sector of end use:
SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no

Uses at industrial sites

Contributing activity / technique for the environmentopen allclose all
Environmental release category (ERC):
ERC5: Use at industrial site leading to inclusion into/onto article
Environmental release category (ERC):
ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Process category (PROC):
PROC 10: Roller application or brushing
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Process category (PROC):
PROC 21: Low energy manipulation of substances bound in materials and/or articles
Product category used:
PC 19: Intermediate
Sector of end use:
SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
SU 9: Manufacture of fine chemicals
SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no

Uses at industrial sites

Contributing activity / technique for the environment
Environmental release category (ERC):
ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 7: Industrial spraying
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Process category (PROC):
PROC 10: Roller application or brushing
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Process category (PROC):
PROC 19: Hand-mixing with intimate contact and only PPE available.
Product category used:
PC 9a: Coatings and paints, thinners, paint removes
PC 18: Ink and toners
Sector of end use:
SU 7: Printing and reproduction of recorded media
SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no

Uses at industrial sites

Contributing activity / technique for the environment
Environmental release category (ERC):
ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Process category (PROC):
PROC 21: Low energy manipulation of substances bound in materials and/or articles
Product category used:
PC 0: Other: Colouring agents, pigments
Sector of end use:
SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
SU 9: Manufacture of fine chemicals
SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
SU 19: Building and construction work
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
yes

Uses at industrial sites

Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Product category used:
PC 15: Non-metal-surface treatment products
Sector of end use:
SU 15: Manufacture of fabricated metal products, except machinery and equipment
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
yes

Uses at industrial sites

Contributing activity / technique for the environmentopen allclose all
Environmental release category (ERC):
ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Environmental release category (ERC):
ERC6a: Use of intermediate
Environmental release category (ERC):
ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Process category (PROC):
PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
Product category used:
PC 2: Adsorbents
PC 19: Intermediate
PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
Sector of end use:
SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
SU 9: Manufacture of fine chemicals
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no

Uses at industrial sites

Contributing activity / technique for the environment
Environmental release category (ERC):
ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Process category (PROC):
PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Product category used:
PC 19: Intermediate
PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
Sector of end use:
SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
SU 9: Manufacture of fine chemicals
SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no

Uses at industrial sites

Contributing activity / technique for the environment
Environmental release category (ERC):
ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Process category (PROC):
PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Process category (PROC):
PROC 15: Use as laboratory reagent
Product category used:
PC 39: Cosmetics, personal care products
Sector of end use:
SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
SU 0: Other: Cosmetics
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no

Uses at industrial sites

Contributing activity / technique for the environment
Environmental release category (ERC):
ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Process category (PROC):
PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
Product category used:
PC 19: Intermediate
Sector of end use:
SU 14: Manufacture of basic metals, including alloys
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no

Uses at industrial sites

Contributing activity / technique for the environmentopen allclose all
Environmental release category (ERC):
ERC5: Use at industrial site leading to inclusion into/onto article
Environmental release category (ERC):
ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Process category (PROC):
PROC 10: Roller application or brushing
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Process category (PROC):
PROC 21: Low energy manipulation of substances bound in materials and/or articles
Product category used:
PC 19: Intermediate
Sector of end use:
SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
SU 9: Manufacture of fine chemicals
SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no

Uses at industrial sites

Contributing activity / technique for the environment
Environmental release category (ERC):
ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 7: Industrial spraying
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Process category (PROC):
PROC 10: Roller application or brushing
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Process category (PROC):
PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Process category (PROC):
PROC 19: Hand-mixing with intimate contact and only PPE available.
Product category used:
PC 9b: Fillers, putties, plasters, modelling clay
Sector of end use:
SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
SU 19: Building and construction work
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no

Uses at industrial sites

Contributing activity / technique for the environment
Environmental release category (ERC):
ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Product category used:
PC 19: Intermediate
Sector of end use:
SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
SU 9: Manufacture of fine chemicals
SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no
Related assessment:
use assessed in a joint CSR

Uses at industrial sites

Contributing activity / technique for the environmentopen allclose all
Environmental release category (ERC):
ERC5: Use at industrial site leading to inclusion into/onto article
Environmental release category (ERC):
ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Process category (PROC):
PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Process category (PROC):
PROC 15: Use as laboratory reagent
Process category (PROC):
PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
Process category (PROC):
PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
Product category used:
PC 19: Intermediate
Sector of end use:
SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
SU 9: Manufacture of fine chemicals
SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no

Uses at industrial sites

Contributing activity / technique for the environment
Environmental release category (ERC):
ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Product category used:
PC 15: Non-metal-surface treatment products
Sector of end use:
SU 15: Manufacture of fabricated metal products, except machinery and equipment
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
yes

Uses at industrial sites

Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Process category (PROC):
PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Process category (PROC):
PROC 15: Use as laboratory reagent
Product category used:
PC 39: Cosmetics, personal care products
Sector of end use:
SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
SU 0: Other: Cosmetics
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no

Uses at industrial sites

Contributing activity / technique for the environment
Environmental release category (ERC):
ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Product category used:
PC 36: Water softeners
PC 37: Water treatment chemicals
Sector of end use:
SU 23: Electricity, steam, gas water supply and sewage treatment
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no

Uses at industrial sites

Registration/ Notification status for the use:
use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
Name of activity / technique:
E-GES-DU(U)1.1(ERC6b).
Environmental release category (ERC):
ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Process category (PROC):
PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Process category (PROC):
PROC 15: Use as laboratory reagent
Process category (PROC):
PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
Process category (PROC):
PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 7: Industrial spraying
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 10: Roller application or brushing
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 15: Use as laboratory reagent
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 15: Use as laboratory reagent
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 15: Use as laboratory reagent
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 15: Use as laboratory reagent
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 17: Lubrication at high energy conditions in metal working operations
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 19: Hand-mixing with intimate contact and only PPE available.
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 19: Hand-mixing with intimate contact and only PPE available.
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 19: Hand-mixing with intimate contact and only PPE available.
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 19: Hand-mixing with intimate contact and only PPE available.
Name of activity / technique:
W-GES-DU(U)[Liquid]
Process category (PROC):
PROC 20: Use of functional fluids in small devices
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 21: Low energy manipulation of substances bound in materials and/or articles
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 25: Other hot work operations with metals
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 25: Other hot work operations with metals
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 25: Other hot work operations with metals
Name of activity / technique:
W-GES-DU(U)[High]
Process category (PROC):
PROC 26: Handling of solid inorganic substances at ambient temperature
Name of activity / technique:
W-GES-DU(U)[Med]
Process category (PROC):
PROC 26: Handling of solid inorganic substances at ambient temperature
Name of activity / technique:
W-GES-DU(U)[Low]
Process category (PROC):
PROC 26: Handling of solid inorganic substances at ambient temperature
Product category used:
PC 19: Intermediate
Sector of end use:
SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
SU 9: Manufacture of fine chemicals
SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no

Uses at industrial sites

Contributing activity / technique for the environmentopen allclose all
Environmental release category (ERC):
ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Environmental release category (ERC):
ERC6a: Use of intermediate
Environmental release category (ERC):
ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Process category (PROC):
PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Product category used:
PC 2: Adsorbents
PC 19: Intermediate
PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
Sector of end use:
SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
SU 9: Manufacture of fine chemicals
SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no

Uses at industrial sites

Contributing activity / technique for the environment
Environmental release category (ERC):
ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Product category used:
PC 0: Other: Colouring agents, pigments
Sector of end use:
SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
Substance supplied to that use in form of:
as such
in a mixture
Subsequent service life relevant for this use:
no