Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove immediately to fresh air. Seek immediate medical
attention.
Emergency measure - Eyes: Flush eyes with copious amounts of water for at least 15
minutes. If irritation occurs seek medical attention.
Emergency measure - Skin: Immediately wash skin with soap and copious amounts of
water. If irritation occurs seek immediate medical
assistance.
Emergency measure - Ingestion: Wash out mouth with water if the person is conscious. Seek
immediate medical assistance.

Fire-fighting measures

Recommended extinguishing agent: Water spray, carbon dioxide, dry chemical powder or
appropriate foam

Product arising from burning: The substance is combustible and will burn if involved in a
fire, evolving noxious fumes (eg carbon, nitrogen and
sulphur oxides and fluorine and chlorine compounds).

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.


Fight the fire from a safe distance or protected location.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.


Wear appropriate personal protective equipment conforming to
the relevant national or international standards, as
mentioned in section 2.3.10.


Avoid dust formation by damping down with water. Absorb
spillages of solutions with a suitable inert material (eg.
sand or soil). Carefully transfer the spillage to waste
containers, or use a sealed industrial vacuam machine.
Containers filled with waste material must be labelled in
the same way as the original substance containers.


Clean the spillage area with soap and water.


Dispose of waste material in accordance with local
regulations by incineration.

Handling and storage

Handling: The substance should be stored, handled and used under
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure.


Engineering controls are necessary to reduce exposure to the
substance.


When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.

Such protective equipment should conform to the appropriate
international or national standards as follows;

Chemical protective gloves to Standard prEN374

Chemical protective clothing to Standard EN368

Eye protection to Standard prEN166.

Furthermore, when respiratory protective equipment has to be
used, it must be capable of adequately controlling exposure,
be suitable for the purpose, and conform to the appropriate
international or national standards, such as a dust mask
conforming to EN149 FFP1.

These measures should be regarded as a minimum.

Storage: Store in a cool, dry well-ventilated area.


Keep containers tightly closed when not in use. Store in
secondary pans or trays away from heat, sparks and flame.
Label all containers when the substance is transfered from
the original container.

Packaging of the substance and or preparation: 100 liter fiberboard containers, double lined with 600 gauge
polyethylene anti-static bags with 25 kilos of product per
container.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport: Avoid crushing the containers. In the event of a spillage,
observe the warning labels on the container.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None known

Chemical reaction with water: None which is hazardous.

Dust explosion: There is a potential dust explosion hazard from this organic
powder.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Discharge to the environment will be minimal. Recovery from
minor spillages or accidental discharge is not economically
or technically feasible, and such waste material will be
disposed of by incineration. In principle, it may be
possible to recover larger spillages of uncontaminated
material for subsequent use.

Industry - Possibility of neutralisation: The notification tests have shown that the substance is a
skin irritant and considered to be an eye irritant, a skin
sensitizer and harmful by oral exposure.

No chemical treatment is practicable to neutralise the
hazardous health properties.


The dust hazard will be minimised by appropriate handling
and storage.


No chemical treatment is practicable to neutralise the
hazardous environmental properties.

Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with
inert material (eg. sand or soil) may be disposed of by
incineration.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg. carbon,
sulphur and nitrogen oxides and fluorine and chlorine
compounds) could be formed.

Industry - Possibility of destruction - water purification: Aqueous wastes which may contain small amounts of the
substance are treated at an on-site WWTP, if preliminary
tests show no effects to sewage sludge micro-organisms, and
are then released to the sea.

Public at large - Possibility of recovery/recycling: Not applicable

Public at large - Possibility of neutralisation: Not applicable

Public at large - Possibility of destruction: controlled discharge: Not applicable

Public at large - Possibility of destruction - incineration: Not applicable

Public at large - Possibility of destruction - water purification: Not applicable

Public at large - Possibility of destruction - others: Not applicable