4,4'-bis(dimethylamino)-4''-(methylamino)trityl alcohol

Biodegradation in water: screening tests

Link to relevant study record(s)

Reference

Endpoint:

biodegradation in water: ready biodegradability

Type of information:

calculation (if not (Q)SAR)

Adequacy of study:

weight of evidence

Reliability:

2 (reliable with restrictions)

Rationale for reliability incl. deficiencies:

accepted calculation method

Justification for type of information:

Data is from computational model developed by USEPA

Qualifier:

according to guideline

Guideline:

other: Modeling database

Principles of method if other than guideline:

The Biodegradation Probability Program (BIOWIN) estimates the probability for the rapid aerobic biodegradation of an organic chemical in the presence of mixed populations of environmental microorganisms .The model is part of the EpiSuite program of the US-EPA. Estimations are made with BIOWIN version 4.10. Estimates are based upon fragment constants that were developed using multiple linear and non-linear regression analyses. Experimental biodegradation data for the multiple linear and non-linear regressions were obtained from Syracuse Research Corporation's (SRC) data base of evaluated biodegradation data (Howard et. al., 1987). This version (v4.10) designates the models as follows (see also Boethling et al. 2003):
Biowin1 = linear probability model
Biowin2 = nonlinear probability model
Biowin3 = expert survey ultimate biodegradation model
Biowin4 = expert survey primary biodegradation model
Biowin5 = MITI linear model
Biowin6 = MITI nonlinear model
Biowin7 = anaerobic biodegradation model

GLP compliance:

no

Oxygen conditions:

other: aerobic (Biowin 1-6) and anaerobic (Biowin 7)

Inoculum or test system:

other: mixed populations of environmental microorganisms

Details on study design:

Using the computer tool BIOWIN v4.10 by US-EPA (EPIWIN) the aerobic as well as the anaerobic biodegradability of the test material can be estimated. The follwoing seven different models are used by the tool: Linear Model, Non-Linear Model, Ultimate Biodegradation Timeframe, Primary Biodegradation Timeframe, MITI LInear Model, MITI Non-Linear Model and Anaerobic Model (calles Biowin 1-7, respectively). Due to this results the overall prediction of readily biodegradability is done for the desired chemical.

Biowin 1 and 2, are intended to convey a general indication of biodegradability under aerobic conditions, and not for any particular medium.
Biowin 1 (Linear model)
The fast biodegradation probability for any compound is calculated by summing, for all the fragments present in that compound, the fragment coefficient multiplied by the number of instances of the fragment in the compound (for MW, the value of that parameter is multiplied by its coefficient), and then adding this summation to the equation constant which is 0.7475. The summed values for each fragment coefficient multiplied by the number of instances appear in the "VALUE" column of the linear results screen.

Biowin 2 (Non-linear model)
Calculation of the fast biodegradation probability for any compound begins by summing, for all the fragments present in that compound, the fragment coefficient multiplied by the number of instances of the fragment in the compound (for MW, the value of that parameter is multiplied by its coefficient), then adding this summation to the equation constant which is 3.0087. The summed values for each fragment coefficient multiplied by the number of instances appear in the "VALUE" column of the non-linear results screen. The non-linear fast biodegradation probability is then calculated from the logistic equation as follows, where total = 3.0087 + the summation as described above:

Biowin 3 and 4 yield estimates for the time required to achieve complete ultimate and primary biodegradation in a typical or "evaluative" aquatic environment.

Biowin 5 and 6 are predictive models for assessing a compound’s biodegradability in the Japanese MITI (Ministry of International Trade and Industry) ready biodegradation test; i.e. OECD 301C. These models use an approach similar to that used to develop Biowin1 and 2. This protocol for determining ready biodegradability is among six officially approved as ready biodegradability test guidelines of the OECD (Organization for Economic Cooperation and Development). A total dataset of 884 chemicals was compiled to derive the fragment probability values that are applied in this MITI Biodegradability method. The dataset consists of 385 chemical that were critically evaluated as "readily degradable" and 499 chemicals that were critically evaluated as "not readily biodegradable".

Biowin 7, the anaerobic biodegradation model, is the most recent. As for the other Biowin models, multiple (linear) regression against molecular fragments was used to develop the model, which predicts probability of rapid degradation in the "serum bottle" anaerobic biodegradation screening test. This endpoint is assumed to be predictive of degradation in a typical anaerobic digester. Biowin7 estimates the probability of fast biodegradation under methanogenic anaerobic conditions; specifically, under the conditions of the "serum bottle" anaerobic biodegradation screening test (Meylan et al. 2007). A total of 169 compounds with serum bottle test data were identified for use in model development.

Out of seven different Biowin models, Biowin model 3 and 4 will help in estimating biodgeradability of the test chemical which was described as below-

Ultimate Biodegradation Timeframe and Primary Biodegradation Timeframe (Biowin 3 and 4)
These two models estimate the time required for "complete" ultimate and primary biodegradation.  Primary biodegradation is the transformation of a parent compound to an initial metabolite.  Ultimate biodegradation is the transformation of a parent compound to carbon dioxide and water, mineral oxides of any other elements present in the test compound, and new cell material. Then the rating was given to each model, which indicates the time required to achieve ultimate and primary biodegradation in a typical or "evaluative" aquatic environment. The ratings for each compound were averaged to obtain a single value for modeling.  The ultimate or primary rating of a compound is calculated by summing, for all the fragments present in that compound.

Key result

Parameter:

probability of ready biodegradability (QSAR/QSPR)

Remarks on result:

other: not readily biodegradable as estimated by BIOWIN model

Details on results:

Biowin1 (Linear Model Prediction) : Does Not Biodegrade Fast : -0.2594
Biowin2 (Non-Linear Model Prediction): Does Not Biodegrade Fast : 0.0000
Biowin3 (Ultimate Biodegradation Timeframe): Recalcitrant : 1.5127
Biowin4 (Primary Biodegradation Timeframe): Weeks-Months : 2.4681
Biowin5 (MITI Linear Model Prediction) : Does Not Biodegrade Fast : -0.5641
Biowin6 (MITI Non-Linear Model Prediction): Does Not Biodegrade Fast : 0.0001
Biowin7 (Anaerobic Model Prediction): Does Not Biodegrade Fast : -3.4687
Ready Biodegradability Prediction: NO

BIOWIN (v4.10) Program Results:

==============================

SMILES : CN(C)c1ccc(C(O)(c3ccc(NC)cc3)c2ccc(N(C)C)cc2)cc1

CHEM :

MOL FOR: C24 H29 N3 O1

MOL WT : 375.52

--------------------------- BIOWIN v4.10 Results ----------------------------

Biowin1 (Linear Model Prediction) : Does Not Biodegrade Fast

Biowin2 (Non-Linear Model Prediction): Does Not Biodegrade Fast

Biowin3 (Ultimate Biodegradation Timeframe): Recalcitrant

Biowin4 (Primary Biodegradation Timeframe): Weeks-Months

Biowin5 (MITI Linear Model Prediction) : Does Not Biodegrade Fast

Biowin6 (MITI Non-Linear Model Prediction): Does Not Biodegrade Fast

5

Biowin7 (Anaerobic Model Prediction): Does Not Biodegrade Fast

Ready Biodegradability Prediction: NO

------+-----+--------------------------------------------+---------+---------

TYPE | NUM | Biowin1 FRAGMENT DESCRIPTION | COEFF | VALUE

------+-----+--------------------------------------------+---------+---------

Frag | 1 | Carbon with 4 single bonds & no hydrogens | -0.1839 | -0.1839

Frag | 1 | Aromatic amine [-NH2 or -NH-] | -0.2338 | -0.2338

Frag | 2 | Tertiary amine | -0.2053 | -0.4105

MolWt| * | Molecular Weight Parameter | | -0.1788

Const| * | Equation Constant | | 0.7475

============+============================================+=========+=========

RESULT | Biowin1 (Linear Biodeg Probability) | | -0.2594

============+============================================+=========+=========

------+-----+--------------------------------------------+---------+---------

TYPE | NUM | Biowin2 FRAGMENT DESCRIPTION | COEFF | VALUE

------+-----+--------------------------------------------+---------+---------

Frag | 1 | Carbon with 4 single bonds & no hydrogens | -1.7232 | -1.7232

Frag | 1 | Aromatic amine [-NH2 or -NH-] | -1.9070 | -1.9070

Frag | 2 | Tertiary amine | -2.2229 | -4.4458

MolWt| * | Molecular Weight Parameter | | -5.3324

============+============================================+=========+=========

RESULT | Biowin2 (Non-Linear Biodeg Probability) | | 0.0000

============+============================================+=========+=========

A Probability Greater Than or Equal to 0.5 indicates --> Biodegrades Fast

A Probability Less Than 0.5 indicates --> Does NOT Biodegrade Fast

------+-----+--------------------------------------------+---------+---------

TYPE | NUM | Biowin3 FRAGMENT DESCRIPTION | COEFF | VALUE

------+-----+--------------------------------------------+---------+---------

Frag | 1 | Carbon with 4 single bonds & no hydrogens | -0.2121 | -0.2121

Frag | 1 | Aromatic amine [-NH2 or -NH-] | -0.1349 | -0.1349

Frag | 2 | Tertiary amine | -0.2548 | -0.5096

MolWt| * | Molecular Weight Parameter | | -0.8298

Const| * | Equation Constant | | 3.1992

============+============================================+=========+=========

RESULT | Biowin3 (Survey Model - Ultimate Biodeg) | | 1.5127

============+============================================+=========+=========

------+-----+--------------------------------------------+---------+---------

TYPE | NUM | Biowin4 FRAGMENT DESCRIPTION | COEFF | VALUE

------+-----+--------------------------------------------+---------+---------

Frag | 1 | Carbon with 4 single bonds & no hydrogens | -0.1534 | -0.1534

Frag | 1 | Aromatic amine [-NH2 or -NH-] | -0.1084 | -0.1084

Frag | 2 | Tertiary amine | -0.2880 | -0.5760

MolWt| * | Molecular Weight Parameter | | -0.5418

Const| * | Equation Constant | | 3.8477

============+============================================+=========+=========

RESULT | Biowin4 (Survey Model - Primary Biodeg) | | 2.4681

============+============================================+=========+=========

Result Classification: 5.00 -> hours 4.00 -> days 3.00 -> weeks

(Primary & Ultimate) 2.00 -> months 1.00 -> longer

------+-----+--------------------------------------------+---------+---------

TYPE | NUM | Biowin5 FRAGMENT DESCRIPTION | COEFF | VALUE

------+-----+--------------------------------------------+---------+---------

Frag | 1 | Carbon with 4 single bonds & no hydrogens | 0.0676 | 0.0676

Frag | 1 | Aromatic amine [-NH2 or -NH-] | -0.1577 | -0.1577

Frag | 2 | Tertiary amine | -0.0848 | -0.1697

Frag | 12 | Aromatic-H | 0.0082 | 0.0986

Frag | 5 | Methyl [-CH3] | 0.0004 | 0.0021

MolWt| * | Molecular Weight Parameter | | -1.1172

Const| * | Equation Constant | | 0.7121

============+============================================+=========+=========

RESULT | Biowin5 (MITI Linear Biodeg Probability) | | -0.5641

6

============+============================================+=========+=========

------+-----+--------------------------------------------+---------+---------

TYPE | NUM | Biowin6 FRAGMENT DESCRIPTION | COEFF | VALUE

------+-----+--------------------------------------------+---------+---------

Frag | 1 | Carbon with 4 single bonds & no hydrogens | 0.3990 | 0.3990

Frag | 1 | Aromatic amine [-NH2 or -NH-] | -1.2264 | -1.2264

Frag | 2 | Tertiary amine | -0.8396 | -1.6793

Frag | 12 | Aromatic-H | 0.1201 | 1.4417

Frag | 5 | Methyl [-CH3] | 0.0194 | 0.0971

MolWt| * | Molecular Weight Parameter | |-10.8407

============+============================================+=========+=========

RESULT |Biowin6 (MITI Non-Linear Biodeg Probability)| | 0.0001

============+============================================+=========+=========

A Probability Greater Than or Equal to 0.5 indicates --> Readily Degradable

A Probability Less Than 0.5 indicates --> NOT Readily Degradable

------+-----+--------------------------------------------+---------+---------

TYPE | NUM | Biowin7 FRAGMENT DESCRIPTION | COEFF | VALUE

------+-----+--------------------------------------------+---------+---------

Frag | 1 | Carbon with 4 single bonds & no hydrogens | -0.3342 | -0.3342

Frag | 1 | Aromatic amine [-NH2 or -NH-] | -0.2778 | -0.2778

Frag | 2 | Tertiary amine | -1.0749 | -2.1497

Frag | 12 | Aromatic-H | -0.0954 | -1.1452

Frag | 5 | Methyl [-CH3] | -0.0796 | -0.3979

Const| * | Equation Constant | | 0.8361

============+============================================+=========+=========

RESULT | Biowin7 (Anaerobic Linear Biodeg Prob) | | -3.4687

============+============================================+=========+=========

A Probability Greater Than or Equal to 0.5 indicates --> Biodegrades Fast

A Probability Less Than 0.5 indicates --> Does NOT Biodegrade Fast

Ready Biodegradability Prediction: (YES or NO)

----------------------------------------------

Criteria for the YES or NO prediction: If the Biowin3 (ultimate survey

model) result is "weeks" or faster (i.e. "days", "days to weeks", or

"weeks" AND the Biowin5 (MITI linear model) probability is >= 0.5, then

the prediction is YES (readily biodegradable). If this condition is not

satisfied, the prediction is NO (not readily biodegradable). This method

is based on application of Bayesian analysis to ready biodegradation data

(see Help). Biowin5 and 6 also predict ready biodegradability, but for

degradation in the OECD301C test only; using data from the Chemicals

Evaluation and Research Institute Japan (CERIJ) database.

Validity criteria fulfilled:

not specified

Interpretation of results:

not readily biodegradable

Conclusions:

The biodegradability of the substance was calculated using seven different Biowin 1-7 models of the BIOWIN v4.10 software. The results indicate that the test chemical is expected to be not readily biodegradable.

Executive summary:

Estimation Programs Interface Suite was run to predict the biodegradation potential of the test chemical in the presence of mixed populations of environmental microorganisms. The biodegradability of the substance was calculated using seven different models such as Linear Model, Non-Linear Model, Ultimate Biodegradation Timeframe, Primary Biodegradation Timeframe, MITI Linear Model, MITI Non-Linear Model and Anaerobic Model (called as Biowin 1-7, respectively) of the BIOWIN v4.10 software. The results indicate that chemical is expected to be not readily biodegradable.

Description of key information

Estimation Programs Interface Suite was run to predict the biodegradation potential of the test chemical in the presence of mixed populations of environmental microorganisms. The biodegradability of the substance was calculated using seven different models such as Linear Model, Non-Linear Model, Ultimate Biodegradation Timeframe, Primary Biodegradation Timeframe, MITI Linear Model, MITI Non-Linear Model and Anaerobic Model (called as Biowin 1-7, respectively) of the BIOWIN v4.10 software. The results indicate that chemical is expected to be not readily biodegradable.

Key value for chemical safety assessment

Biodegradation in water:

not biodegradable

Additional information

Predicted data of the target chemical and various supporting weight of evidence studies of its read across chemical were reviewed for the biodegradation end point which are summarized as below:

 

In a prediction done using the Estimation Programs Interface Suite, the biodegradation potential of the test chemical in the presence of mixed populations of environmental microorganisms was predicted. The biodegradability of the substance was calculated using seven different models such as Linear Model, Non-Linear Model, Ultimate Biodegradation Timeframe, Primary Biodegradation Timeframe, MITI Linear Model, MITI Non-Linear Model and Anaerobic Model (called as Biowin 1-7, respectively) of the BIOWIN v4.10 software. The results indicate that chemical is expected to be not readily biodegradable.

 

In a supporting weight of evidence study from study report, biodegradation study was conducted for 28-days Closed Bottle test following the OECD guideline 301 D to determine the ready biodegradability of the test chemical. The study was performed at a temperature of 20°C. The test system included control, test item and reference item. Polyseed were used for this study. 1 polyseed capsule were added in 500 ml D.I water and then stirred for 1 hour for proper mixing and functioning of inoculum. This gave the bacterial count as 10E7 to 10E8 CFU/ml. At the regular interval microbial plating was also performed on agar to confirm the vitality and CFU count of microorganism. The concentration of test and reference item (Sodium Benzoate) chosen for both the study was 4 mg/L, while that of inoculum was 32 ml/l. OECD mineral medium was used for the study. ThOD (Theoretical oxygen demand) of test and reference item was determined by calculation. % degradation was calculated using the values of BOD and ThOD for test item and reference item. The % degradation of procedure control (reference item) was also calculated using BOD & ThOD and was determined to be 72.28%. Degradation of Sodium Benzoate exceeds 63.25% on 7 days & 69.27% on 14th day. The activity of the inoculum is thus verified and the test can be considered as valid. The BOD28 value of test chemical was observed to be 0.4 mgO2/mg. ThOD was calculated as 1.31 mgO2/mg. Accordingly, the % degradation of the test chemical after 28 days of incubation at 20 ± 1°C according to Closed Bottle test was determined to be 30.53%. Based on the results, the test chemical, under the test conditions, was considered to be not biodegradable in nature.

 

For the test chemical, biodegradation study (H. Heukelekian et. al., 1955) was conducted for 5 days for evaluating the percentage biodegradability of test chemical using standard dilution method under aerobic conditions at a temperature of 20°C. Sewage was used as a test inoculum. The 5 day BOD value of test chemical was determined to be 0 g/g. Thus, based on this value, test chemical is considered to be not readily biodegradable in nature.

 

On the basis of the overall results, it can be concluded that the test chemical was considered to be not readily biodegradable in water.