Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Ingestion: Rinse mouth with water. Drink a pint of milk or water. Do not induce vomiting. Seek immediate medical attention.
Inhalation: If excessive inhalation, carry the patient to breathe fresh air and keep quiet. Seek immediate medical attention.
Skin Contact: In case of skin contact, remove contaminated clothing and wash with soap and water. If irritation persists, or there is damage, seek medical attention immediately.
Eye Contact: In case of eye contact wash thoroughly with water. If the irritation persists or there is tissue damage, seek medical attention immediately.

Fire-fighting measures

Carbon dioxide, water, foam and dry extinguishing media

Accidental release measures

Keep away from ignition sources.
Ventilate properly.
Collect and recover free product and dispose of according to local regulations.
Not discharge into drains, groundwater and surface water, or in the field.

Handling and storage

Open and handle container with care.
Keep the room well ventilated.
Avoid contact with skin, eyes and clothing.
Keep away from foodstuffs and beverages.
Wash hands after working.
Extinguisher accessible.
Keep container in well ventilated area.
Keep away from heat sources.
Avoid successive overheating as oxidation and polymerization is possible without proper storage.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

No TLV available.
Inhalation: Mask according CEN standard EN 149:2001, (minimum FF P3) (in case of insufficient ventilation)
Eyes: Safety glasses according CEN standard EN 166:2002.
Skin: Avoid contact by using chemical resistant gloves. It must be tested according CEN standard EN 374:2003 (e.g. nitrile gloves, thickness:0.38mm +/-0.05 mm and breakthrough time >480 min)
Depending on the workplace use special clothing to limit pollution by staff smelly clothes. It must be tested according CEN standard EN 13034:2005 (type 6). Follow normal hygiene rules.

Stability and reactivity

Stable in proper storage conditions.

Disposal considerations

The management of all waste and packaging waste will be carried out fulfilling the provisions thereon in local, regional, national and European