Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 700-972-2 | CAS number: 93-83-4
Guidance on Safe Use
Guidance on Safe Use
Currently viewing:
Administrative data
First-aid measures
- After inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention if symptoms appear.
- After swallowing: If affected person is fully conscious, give one glass of water to drink. Never give anything by mouth to an unconscious person. Get medical attention if symptoms appear.
- After skin contact: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention immediately.
- After eye contact: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention immediately.
- After swallowing: If affected person is fully conscious, give one glass of water to drink. Never give anything by mouth to an unconscious person. Get medical attention if symptoms appear.
- After skin contact: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention immediately.
- After eye contact: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention immediately.
Fire-fighting measures
- Suitable extinguishing media: In case of fire, use water spray (fog), foam, dry chemical or CO2
- Special hazards arising from the substance or mixture: No specific data. Decomposition products may include the following materials: nitrogen oxides (NO, NO2 etc.), carbon oxides (CO, CO2), organic materials
- Advice for fire fighters: Fire-fighters should wear positive pressure self-contained breathing apparatus (SCBA) and full turnout gear.
- Special hazards arising from the substance or mixture: No specific data. Decomposition products may include the following materials: nitrogen oxides (NO, NO2 etc.), carbon oxides (CO, CO2), organic materials
- Advice for fire fighters: Fire-fighters should wear positive pressure self-contained breathing apparatus (SCBA) and full turnout gear.
Accidental release measures
Personal precautions, protective equipment and emergency procedures: Immediately contact emergency personnel. Keep unnecessary personnel away. Use suitable protective equipment (see below Exposure controls/personal protection section for details). Follow all fire-fighting procedures as described above.
Handling and storage
- Advice on handling: Avoid contact with eyes, skin and clothing. Wash thoroughly after handling.
- Advice on storage, including any incompatibilities: Keep container tightly closed. Keep container in a cool, well-ventilated area
- Advice on storage, including any incompatibilities: Keep container tightly closed. Keep container in a cool, well-ventilated area
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- Not regulated.
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- Not regulated.
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- Not regulated.
Shipping information
- Proper shipping name and description:
- Not required
- Chemical name:
- Not required
- Labels:
- Not required
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- Not regulated.
Shipping information
- Proper shipping name and description:
- Not required
- Chemical name:
- Not required
- Labels:
- Not required
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Appropriate engineering controls: Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective threshold limit value.
Individual protection measures:
- Safety goggles are considered minimum protection. Goggles with a face shield may be necessary depending on quantity of material and conditions of use.
- Skin protection:
- Hand Protection: Wear chemical resistant gloves. Nitrile gloves of minimum thickness 0.4 mm have an expected breakthrough time of 480 mi utes or less when in frequent contact with the product. Due to variable exposure conditions the user must consider that the practical use of a chemical-protective glove in practice may be much shorter than the permeation time above. Manufacturer’s directions for use, especially abo ut the minimum thickness and the minimum breakthrough time, must be observed. This information does not replace suitability tests by the e nd user since glove protection varies depending on the conditions under which the product is used.
- Body protection: Where contact is likely, wear chemical resistant gloves, a chemical resistant suit, and boots. Additional body garments should be used based upon the task being performed.
- Respiratory protection: Use appropriate respiratory protection if there is the potential to exceed the exposure limit(s).
Environmental exposure controls: Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.
Individual protection measures:
- Safety goggles are considered minimum protection. Goggles with a face shield may be necessary depending on quantity of material and conditions of use.
- Skin protection:
- Hand Protection: Wear chemical resistant gloves. Nitrile gloves of minimum thickness 0.4 mm have an expected breakthrough time of 480 mi utes or less when in frequent contact with the product. Due to variable exposure conditions the user must consider that the practical use of a chemical-protective glove in practice may be much shorter than the permeation time above. Manufacturer’s directions for use, especially abo ut the minimum thickness and the minimum breakthrough time, must be observed. This information does not replace suitability tests by the e nd user since glove protection varies depending on the conditions under which the product is used.
- Body protection: Where contact is likely, wear chemical resistant gloves, a chemical resistant suit, and boots. Additional body garments should be used based upon the task being performed.
- Respiratory protection: Use appropriate respiratory protection if there is the potential to exceed the exposure limit(s).
Environmental exposure controls: Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.
Stability and reactivity
- Reactivity: No specific test data related to reactivity available for this product or its ingredients.
- Chemical stability: The product is stable.
- Conditions to avoid: High temperatures, sparks, and open flames.
- Incompatible materials: Strong oxidizing and reducing agents. There is a possibiity that small amounts of nitrosamines may be formed if this product is used in formulations which also contains sodium nitrite.
- Hazardous decomposition products: No specific data. Decomposition products may include the following materials: carbon oxides (CO, CO2) nitrogen oxides (NO, NO2 etc.) organic materials
- Chemical stability: The product is stable.
- Conditions to avoid: High temperatures, sparks, and open flames.
- Incompatible materials: Strong oxidizing and reducing agents. There is a possibiity that small amounts of nitrosamines may be formed if this product is used in formulations which also contains sodium nitrite.
- Hazardous decomposition products: No specific data. Decomposition products may include the following materials: carbon oxides (CO, CO2) nitrogen oxides (NO, NO2 etc.) organic materials
Disposal considerations
Waste must be disposed of in accordance with federal, state and local environmental control regulations.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
