Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 209-400-1 | CAS number: 576-26-1
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_environmental-fate-and-pathways.png)
Biodegradation in water: screening tests
Administrative data
Link to relevant study record(s)
Description of key information
A weight of evidence approach suggests that 2,6-xylenol biodegrades but does not meet the criterion for ready biodegradability.
Key value for chemical safety assessment
- Biodegradation in water:
- inherently biodegradable, not fulfilling specific criteria
Additional information
This endpoint is addressed on a weight of evidence basis. Six endpoints have been provided to form the weight of evidence; five of these are experimental values and the sixth is a Quantitative Structure Activity Relationship (QSAR) calculation (EPI Suite vs 4.0).
The first result was published in Applied Microbiology and Biotechnology (Puig-Grajales et al., 2000). No guideline was followed however the study was conducted using acceptable scientific methods and principles. It was therefore awarded a reliability score of 2 in accordance with the criteria for assessing data quality as set forth by Klimisch et al. (1997).
A batch anaerobic biodegradability assay was conducted with either anaerobic granular sludge treating distillery wastewater or anaerobic Rhine sediment. Studies were conducted under methanogenic, sulfate-reduction, denitrification, Fe (III)- and Mn (IV)-reducing conditions for up to 100 days.
Under the conditions of this assay, 2,6-xylenol was not biodegradable under methanogenic, sulfate-, or nitrate-reducing conditions but did convert by chemical oxidation with Mn (IV).
In the second study, the potential of the read-across substance 2,4,6-trimethylphenol to undergo ready biodegradation was investigated in accordance with the standardised guideline OECD 301D under GLP conditions. It was awarded a reliability score of 2.
Activated sludge was exposed to the test material under aerobic conditions for 28 days. O₂ consumption was the parameter followed to estimate biodegradation.
Under the conditions of this study, the test material showed 11.3 % biodegradation in 28 days, which did not meet the criterion for ready biodegradability (i.e., 60 % degradation in 28 days).
In the third study, the potential of the test material to undergo ready biodegradation was investigated in accordance with the standardised guideline OECD 301C under GLP conditions. It was awarded a reliability score of 2.
Activated sludge was exposed to the test material under aerobic conditions for 28 days. O₂ consumption measured by BOD was the parameter followed to estimate biodegradation. After the 28 day contact period, 2 % degradation was observed.
Under the conditions of this study, 2,6-xylenol was determined to be non-biodegradable.
The QSAR calculation was carried out using EPI (Estimation Programs Interface) Suite, a Windows-based suite of physical/chemical property and environmental fate estimation programs developed by the US EPA’s Office of Pollution Prevention Toxics and Syracuse Research Corporation (SRC). It was awarded a reliability score of 2.
The BIOWIN model was used to estimate the potential biodegradation of the test material. The model estimates aerobic and anaerobic biodegradability of organic chemicals using 7 different models. The models and results are as follows:
- Biowin1 (Linear Model Prediction): Biodegrades Fast
- Biowin2 (Non-Linear Model Prediction): Biodegrades Fast
- Biowin3 (Ultimate Biodegradation Timeframe): Weeks
- Biowin4 (Primary Biodegradation Timeframe): Days-Weeks
- Biowin5 (MITI Linear Model Prediction): Biodegrades Fast
- Biowin6 (MITI Non-Linear Model Prediction): Biodegrades Fast
- Biowin7 (Anaerobic Model Prediction): Does Not Biodegrade Fast
- Ready Biodegradability Prediction: YES
This calculation therefore estimated 2,6-xylenol to be readily biodegradable.
The fifth study was published in Environmental Progress (Stenstrom et al., 1989). However the documentation was insufficient for assessment and as a result the study was awarded a reliability score of 3 in accordance with the criteria for assessing data quality as set forth by Klimisch et al. (1997).
An aerobic batch reactor was used. Batch aqueous solutions were inoculated with activated sludge acclimated to 2,4-xylenol and aerated. The duration of the test was not clearly specified; however it was implied that it was less than one day.
The authors concluded that xylenol and cresol compounds with a methyl group in the 2 or 4 position degrade well. However, the reaction rate for 2,6-xylenol was relatively low.
The sixth study was published in Water Research (Pitter, 1976). It was comparable to a 301D guideline study with acceptable restrictions and was therefore awarded a reliability score of 2.
Activated sludge, adapted, was exposed to the test material for a contact time of 20 days under aerobic conditions. COD removal was the parameter followed to estimate biodegradation.
The rate of biodegradation was determined to be 9.0 mg COD/g/hour. 94.3 percent of the test material was removed based upon COD in an unspecified time period.
Under the conditions of this study, 2,6-xylenol was determined to be biodegradable.
Three studies suggest that the test material is biodegradable, the publication by Pitter (1976), the EPISUITE QSAR calculation and the poorly documented study by Stenstrom et al. (1989).
Two studies suggest that 2,6-xylenol does not meet the criterion for ready biodegradability. The study conducted in accordance with the standardised guideline OECD 301 indicated that 2,6-xylenol is not biodegradable. Further, a the reliable study conducted on 2,4,6 -trimethylphenol showed 11.3 % biodegradation in 28 days, which did not meet the criterion for ready biodegradability.
This read-across datum is potentially conservative with respect to the potential for degradation of 2,6-xylenol: As part of the study reported by Pitter the degradability of 2,4,6-trimethylphenol was also tested; 94.3 and 0 % degradation were observed for 2,6-xylenol and 2,4,6-trimethylphenol, respectively, during the test period.
The weight of evidence therefore suggests that 2,6-xylenol is inherently biodegradable but not readily biodegradable.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)