Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

First Aid Measures

Description of first aid measures


Wash with soap and water. Remove contaminated clothing. Get medical attention if irritation develops. Launder contaminated clothing before reuse.


Flush with water at least 30 minutes. Get medical attention if eye irritation develops or persists.


Remove to fresh air and keep at rest in a position comfortable for breathing. If breathing is labored, administer oxygen. If breathing has stopped, apply artificial respiration. Call a poison center or doctor if exposed or you feel unwell.


DO NOT INDUCE VOMITING. Get immediate medical attention.

Advice for first-aid providers

When providing first aid always protect yourself against exposure to chemicals or blood born diseases by wearing gloves, masks and eye protection. If providing CPR use mouthpieces, resuscitation bags, pocket masks or other ventilation devices. After providing first aid wash your exposed skin with soap and water.

Most important symptoms and effects, both acute and delayed

See section “Toxicological Information”.

Indication of any immediate medical attention and special treatment needed

Note to physician: Treat symptomatically.

Fire-fighting measures

Fire Fighting Measures

Extinguishing Media

CO2, dry chemical, foam, water spray, water fog. Alcohol resistant foam.

Special hazards arising from substance or mixture

Burning may produce irritating, toxic and obnoxious fumes. Container may rupture in a fire situation. See section 10 for additional information.

Advice for firefighters

Wear full protective firegear including self-containing breathing apparatus operated in the positive pressure mode with full facepiece, coat, pants, gloves and

boots. Water may cause splattering. A solid stream of water will spread the burning material. Material creates a special hazard because it floats on water. Do not

release chemically contaminated water into drains, soil or surface water.

Accidental release measures

Accidental Release Measures

Personal precautions, protective equipment and emergency procedures

Only trained personnel should be permitted in area. Personal protective equipment must be worn. Ventilate area if spilled in a confined space or other poorly

ventilated area. Material on floor may be slippery.

Environmental precautions

Material will float on water. Take precautions to avoid release to the environment. Do not flush into surface water, sanitary sewer or ground water system.

Methods and material for containment and cleaning up

Pick up free liquid for recycle and/or disposal. Residual liquid can be absorbed on inert material. Small spills: contain spilled material. Transfer to secure

containers. Where necessary collect using absorbent media. Larger spills: stop spill and dike area to prevent spreading, pump liquid to salvage tank. remaining

liquid may be taken up on sand, clay, earth, floor absorbent or other absorbent material and shoveled into containers. Wash spill area with soap and water.

Reference to other sections

See sections “Exposure Controls/Personal Protection” and “Toxicological Information”

Handling and storage

Handling and Storage

Precautions for safe handling

Use with adequate ventilation. Keep containers closed when not in use. Do not discharge into drains or the environment, dispose to an authorized waste collection point. Use appropriate containment to avoid environmental contamination. When handling, do not eat, drink, or smoke Avoid inhalation of dust, aerosol, mist, spray, fume, or vapor. Use with appropriate and adequate ventilation. Ground and bond containers when transferring material. Take precautionary measures against static discharge. Do not heat opened containers with steam in a manner that allows steam to condense into container. Wash thoroughly after handling. Launder contaminated clothing before reuse. Empty containers retain material residue. Do not cut, weld, braze, solder, drill, grind or expose containers to heat, flame, spark or other sources of ignition. Dispose of packaging or containers in accordance with local, regional, national and international regulations.

Pumping Temperature

Not determined.

Maximum Handling Temperature

Not determined.

Maximum Loading Temperature

Not determined.

Conditions for safe storage, including any incompatibilites

Store separately from oxidizers. Take precautions to avoid release to the environment. Store in a cool, dry, well-ventilated area. Store separately from

incompatible materials. Keep container tightly closed. Do not store in open, unlabeled or mislabeled containers. See section 10 for incompatible materials.

Maximum Storage Temperature

Not determined.

Specific end use(s)

End uses are listed in an attached exposure scenario when one is required.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters

None known.

Other Exposure Limits

Contains synthetic basestock. Under conditions which may generate mists, observe the OSHA PEL of 5 mg per cubic meter, ACGIH TWA of 5 mg per cubic

meter for mineral oil mists.

Exposure controls

Use material in well ventilated area only. Additional ventilation or exhaust may be required to maintain air concentrations below recommended exposure limits.

Eye/face protection

Safety glasses. If oil mist is generated, chemical goggles are recommended.

Skin protection

Neoprene. Consult clothing/glove manufacturer to determine appropriate type of glove for given situation. Gloves should always be inspected before each use and discarded if they show tears, pinholes, or signs of wear. Use good industrial hygiene practices to avoid skin contact. If contact with the material may occur wear chemically protective gloves.

Long sleeve shirt is recommended. Wear a chemically protective apron when contact with material may occur. Launder contaminated clothing before reuse.

Respiratory Protection

Use respirator with a combination organic vapor and high efficiency filter cartridge if recommended exposure limit is exceeded. Use self-contained breathing

apparatus for entry into confined space, for other poorly ventilated areas and for large spill clean-up sites.

Hygiene Measures

Wash thoroughly after handling this product. Do not eat, drink or smoke when using this product.

Environmental exposure controls

See section “Accidental Release Measures” for details.Exposure Controls/Personal Protection

Stability and reactivity

Stability and Reactivity


Carefully review all information provided in the following sections sections.

Chemical stability

Material is normally stable at moderately elevated temperatures and pressures.

Possibility of hazardous reactions Will not occur.

Conditions to avoid

Do not expose to excessive heat, ignition sources, or oxidizing materials.

Incompatible materials

Strong acids. Strong bases. Oxidizing agents.

Hazardous decomposition products

Smoke, carbon monoxide, carbon dioxide, aldehydes and other products of incomplete combustion.

Disposal considerations

Disposal Considerations

Waste treatment methods

All disposal practices must be in accordance with local, regional, national and international regulations. Do not dispose in landfill.

Empty container retains product residue and can be hazardous. Do not pressurize, cut, weld, braze, solder, drill, grind or expose containers to heat, flame, sparks, static electricity, or other sources of ignition. Dispose of packaging or containers in accordance with local, regional, national and international regulations.