Registration Dossier
Registration Dossier
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 283-829-2 | CAS number: 84731-70-4
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data

Toxicity to soil macroorganisms except arthropods
Administrative data
Link to relevant study record(s)
- Endpoint:
- toxicity to soil macroorganisms except arthropods: short-term
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2017-11-16 to 2017-12-01
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 207 (Earthworm, Acute Toxicity Tests)
- GLP compliance:
- yes (incl. QA statement)
- Specific details on test material used for the study:
- Batch No.: 20170214
Purity: >99% - Analytical monitoring:
- no
- Vehicle:
- no
- Test organisms (species):
- other: Eisenia foetida
- Details on test organisms:
- TEST ORGANISM
- Source: obtained from Chenggong Earthworm Raising Farm in Dongli District, Tianjin.
- Weight at test initiation: At the beginning, the range of body weight was 0.3948g ~ 0.5253g in the control group and 0.3533g ~ 0.5418g in the test concentrations
ACCLIMATION
- Acclimation conditions (same as test or not): Before at least 24 hours of the test, the earthworm was conditioned in an artificial soil under the test condition. - Study type:
- laboratory study
- Substrate type:
- artificial soil
- Limit test:
- yes
- Total exposure duration:
- 14 d
- Test temperature:
- 19.7°C ~ 20.6°C
- pH:
- The pH value was 5.91 and 5.86 for the control and test medium at the start.
- Moisture:
- The moisture content was 32.82% and 30.04% for the control and test medium at the start, 30.16% ~ 31.56% at the end.
- Details on test conditions:
- TEST SYSTEM
- Preparation of Test Medium:
2.49972 g of test item was weighed and mixed with 50g industrial sand. The treated sand was mixed thoroughly with proper artificial soil (dry weight was 2450 g). Proper distilled water (750 ml) was added to adjust the moisture content to about 30-35% of dry weight and mixed to be homogeneous. The complete mixture was moist but not so wet that water appears when the artificial soil was compressed. For each treated soil, four 750 g of the wet test medium were weighed and put into 4 labeled test containers.
A concurrent control group with four replicates maintained under identical conditions only without test item application would be performed in parallel. 50 g industrial sand was applied to properly pre-moistened artificial soil (dry weight was 2450 g). Proper distilled water (750 ml) was added to adjust the moisture content to about 30-35% of dry weight and mixed to be homogeneous. After the same treatment procedure as with the test medium, the sample was used as the control medium.
- No. of organisms per container (treatment): 10
- No. of replicates per treatment group: 4
- No. of replicates per control: 4
SOURCE AND PROPERTIES OF SUBSTRATE (if soil)
- Preparation of Artificial Soil:
The artificial soil was prepared as follows:
a) 10 percent sphagnum peat (pH 5.5 to 6.0, no visible plant remains, finely ground, dried to measure moisture content that was determined to be 10.49%,);
b) 20 percent kaolin clay (kaolinite content above 30 percent);
c) 70 percent industrial Quartz sand (fine sand was dominant with more than 50 percent of the particles between 50 and 200 microns).
The dry constituents were blended in the correct proportions and mixed thoroughly in blender. According to above proportions, 2 replicates of 2500 g artificial soil were prepared for the test. For dosage of the test item, 50g of the sand fraction was used as carrier: after mixing, the treated sand sample was reintroduced to the test soil under mixing. After test item application, the moisture content was adjusted to about 30-35%.
OTHER TEST CONDITIONS
- Photoperiod: The light was kept continuous
- Light intensity: 521Lux ~ 674Lux (measured at the beginning and the end of the test)
- Relative humidity: 77% ~ 83%
EFFECT PARAMETERS MEASURED (with observation intervals if applicable) :
- Measurement of body weight, soil moisture content and soil pH
At the start and at the end of the test, the individual weights of all live worms in each group were measured and recorded. The worms were washed prior to weighing (with distilled water) and the excess water was removed by placing the worms briefly on filter paper.
At the start and at the end of the test, soil moisture content was determined of each treatment medium and control medium. 1 replicate at the start and 4 replicates at the end. The moisture content was determined by drying a small sample at 105oC at least for 3 hours and re-weighing.
At the start of the test, soil pH was measured. 1 replicate would be measured in test group and control group. The method was as followed: wet soil was dried at room temperature for about 48 h. A suspension of the soil (containing 5 grams of soil) was then made up in five times its volume of a 0.01 M solution of analytical grade calcium chloride (CaCl2). The suspension was then shaken thoroughly for five minutes and then left to settle for at least 2 hours but not for longer than 24 hours. The pH of the liquid phase was then measured using a pH-meter.
- Observations
The mortality was assessed by emptying test medium onto a plate, sorting worms from the medium and testing their reaction to a mechanical stimulus at the front end at 7 and 14 days. After the 7-day assessment, worms and medium were replaced into the test containers. Any observed behavioral or pathological symptoms were recorded.
VEHICLE CONTROL PERFORMED: no
TEST CONCENTRATIONS
- Range finding study
- Test concentrations: 300, 1000 and 3000 mg/kg dry soil weight
- Results used to determine the conditions for the definitive study: There was no mortality or abnormal toxic signs observed on 7 and 14 days observation. - Nominal and measured concentrations:
- Nominal: 1000 mg/kg dry soil weight
- Reference substance (positive control):
- yes
- Remarks:
- chloracetamide
- Key result
- Duration:
- 14 d
- Dose descriptor:
- LC50
- Effect conc.:
- > 1 000 mg/kg soil dw
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- mortality
- Details on results:
- During the exposure period, there was no mortality or abnormal signs in the control group, so the test was valid.
There were no mortality or toxic signs observed in the test group of 1000 mg/kg dry soil weight. - Results with reference substance (positive control):
- The 14-days LC50 of the reference substance to earthworm is 44.79 mg/kg dry soil weight, with 95% confidence limits of 34.27-58.54 mg/kg dry soil weight.
- Validity criteria fulfilled:
- yes
- Conclusions:
- The 14-days LC50 of the test item to the earthworm is greater than 1000 mg/kg dry soil weight.
- Executive summary:
This study was performed to assess the acute toxicity of the test item to the earthworm according to OECD Guideline 207 (Earthworm, Acute Toxicity Tests).
Based on the results of a preliminary test, the definitive study was conducted with limit concentration of 1000 mg/kg dry soil weight. A concurrent control group was conducted in parallel. For the test and control groups, four replicates were used with 10 worms in each replicate. Artificial soil was used in this study. The test duration was 14 days, assessment of mortality and abnormal signs were conducted at 7 and 14 days.
During the exposure period, there was no mortality or abnormal signs observed at control group and the test group of 1000 mg/kg dry soil weight.
According to the result, the 14-days LC50 of the test item to the earthworm is greater than 1000 mg/kg dry soil weight.
- Endpoint:
- toxicity to soil macroorganisms except arthropods: long-term
- Data waiving:
- study scientifically not necessary / other information available
- Justification for data waiving:
- other:
Referenceopen allclose all
Description of key information
Short-term study:
The 14-days LC50 of the test item to the earthworm is greater than 1000 mg/kg dry soil weight according to OECD Guideline 207.
Long-term study:
Equilibrium partitioning gives rise to a soil predicted no effect concentration which was undemanding.
With this in mind, further testing on the substance is considered not necessary.
Key value for chemical safety assessment
Additional information
According to Regulation (EC) No. 1907/2006, Annex X, section 9.4 column 2, Long-term toxicity testing shall be proposed by the registrant if the chemical safety assessment according to Annex I indicates the need to investigate further the effects on terrestrial organisms. In the absence of toxicity data for soil organisms, the equilibrium partitioning method may be applied to assess the hazard to soil organisms. Wet weight PNECs were calculated with using equilibrium partitioning as described in Guidance R.10 & R.16, conversion to dry weight was performed with factor of 1.13. A further Assessment Factor of 10 was also used to account for the substances high partition coefficient (logKow>5) This gave rise to a soil predicted no effect concentration which was undemanding and as such the chemical safety assessment should conclude safe use of the material. With this in mind, further testing on the substance is considered not necessary.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
