Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 215-252-9 | CAS number: 1315-01-1
Flammability
Administrative data
Link to relevant study record(s)
- Endpoint:
- flammable solids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 19 November 2010
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Remarks:
- Guideline compliant study with good documentation of the applied methods.
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.10 (Flammability (Solids))
- Deviations:
- no
- GLP compliance:
- no
- Key result
- Test procedure:
- burning time (test type not further specified)
- Remarks:
- or specified in description of method (migrated information)
- Burning time:
- 1 520 s
- Interpretation of results:
- not classified based on GHS criteria
- Conclusions:
- Tin disulfide is not highly flammable.
- Executive summary:
The flammability of tin disulfide was determined according to EC A.10 “Determination of the Flammability (Solids)". The combustion speed was 1520 s for 200 mm. Therefore, the test was stopped after the pre-test and tin disulfide is considered to be not highly flammable.
The results of this test are considered to be relevant and reliable for the risk assessment.
Reference
Propagation time for combustion over 200 mm: 1520 s
Result: positive; no further testing required
Tin disulfide is not highly flammable.
Description of key information
Tin disulfide is not highly flammable.
Key value for chemical safety assessment
- Flammability:
- not classified
Additional information
In the Klimisch 1 key study from Paß (2011) the flammability of tin disulfide was determined according to EC A.10 “Determination of the Flammability (Solids)". The combustion speed was 1520 s for 200 mm. Therefore, tin disulfide is considered to be not highly flammable.
The results of this test are considered to be relevant and reliable for the risk assessment.
Justification for classification or non-classification
Tin disulfide is not highly flammable. Therefore, classification is not needed.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
