Registration Dossier

Administrative data

First-aid measures

If inhaled: move person into fresh air. Seek medical attention after significant exposure.
On skin contact: Flush with copious amounts of water for at least 15 minutes. Remove contaminated clothing. Immediately wash thoroughly with plenty of water, apply sterile dressings, consult a skin specialist.
On contact with eyes: Rinse immediately with plenty of running water (for 10 minutes), seek medical attention from a specialist.
On ingestion: Immediately rinse mouth and then drink plenty of water, do not induce vomiting, seek medical attention. If swallowed, seek medical advice immediately and show this container or label.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media: carbon dioxide, foam, dry powder, water spray
Unsuitable extinguishing media for safety reasons: Unknown
Special hazards arising from the substance or mixture: harmful vapours. Evolution of fumes/fog. The substances/groups of substances mentioned can be released in case of fire.
Advice for fire-fighters: No particular measures required.

Accidental release measures

Personal precautions, protective equipment and emergency procedures: Avoid contact with skin and eyes. Wear protective gloves.
Environmental precautions: Do not discharge into drains/surface waters/groundwater.
Methods and material for containment and cleaning up: For large amounts: Pick up with absorbent material (e.g. sand, sawdust, general-purpose binder).
This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 17(3) for on-site isolated intermediates. Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each Manufacturing site.

Handling and storage

Precautions for safe handling:
Do not get in eyes, on skin, on clothing. Wash thoroughly after handling. Do not swallow. Avoid prolonged or repeated contact with skin. Keep container closed. This substance may only be used as an intermediate for the production of other chemicals under strictly controlled conditions.
Conditions for safe storage, including any incompatibilities:
Suitable materials for containers: High density polyethylene (HDPE)
Further information on storage conditions: Keep container tightly sealed. Store protected against freezing.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls
Personal protective equipment:
Hand protection. Suitable are protective gloves with the following specification. The recommendation is valid for laboratory conditions, specific workplace conditions must be taken into consideration separately. Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN 374):
Eye protection: Safety glasses
General safety and hygiene measures: Handle in accordance with good industrial hygiene and safety practice.

Stability and reactivity

Reactivity: No hazardous reactions if stored and handled as prescribed/indicated.
Chemical stability: The product is stable if stored and handled as prescribed/indicated.
Possibility of hazardous reactions: None if used for intended purpose.
Handling and storage.: Keep container tighly sealed, Store protected against freezing
Incompatible materials/Substances to avoid: No substances known that should be avoided.
Hazardous decomposition products/Possible decomposition products: No hazardous decomposition products known.

Disposal considerations

Disposal Considerations
Waste treatment methods: Can be landfilled, when in compliance with local regulations.