Registration Dossier

Administrative data

First-aid measures

Description of first aid measures
Skin
Wash with soap and water for 20 minutes or until chemical is removed. Get medical attention if irritation develops.

Eyes
Rinse cautiously with water for 20 minutes or until chemical is removed. Remove contact lenses, if present and easy to do. If eye irritation persists, get medical
attention.

Inhaled
Remove victim to fresh air and keep at rest in a position comfortable for breathing. If breathing is labored, administer oxygen. If breathing has stopped, apply
artificial respiration. Call a poison center or doctor.

Swallowed
Treat symptomatically. Get medical attention.

Advice for first-aid providers
When providing first aid always protect yourself against exposure to chemicals or blood born diseases by wearing gloves, masks and eye protection. If providing CPR use mouthpieces, resuscitation bags, pocket masks or other ventilation devices. After providing first aid wash your exposed skin with soap and water.

Most important symptoms and effects, both acute and delayed
See section "Toxicological Information".

Indication of any immediate medical attention and special treatment needed
If exposed or concerned: Get medical attention.

Fire-fighting measures

Extinguishing Media
CO2, dry chemical, foam, water spray, water fog.

Special hazards arising from substance or mixture
Burning may produce irritating, toxic and obnoxious fumes. Container may rupture on heating. DO NOT USE a solid stream of water. See section 10 for
additional information.

Advice for firefighters
Recommend wearing self-contained breathing apparatus. Use water spray. A solid stream of water may cause frothing and splattering. Use water to cool
containers exposed to fire. A solid stream of water will spread the burning material. Do not release chemically contaminated water into drains, soil or surface
water.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Only trained personnel should be permitted in area. Personal protective equipment must be worn. Ventilate area if spilled in a confined space or other poorly
ventilated area.

Environmental precautions
Take precautions to avoid release to the environment. Do not flush into surface water, sanitary sewer or ground water system.

Methods and material for containment and cleaning up
Pick up free liquid for recycle and/or disposal. Residual liquid can be absorbed on inert material. Place in metal containers for recovery or disposal.

Reference to other sections
See sections 8 and 13 for additional information.

Handling and storage

Precautions for safe handling
Keep containers closed when not in use. Do not discharge into drains or the environment, dispose to an authorized waste collection point. Use appropriate
containment to avoid environmental contamination. Avoid eye contact. Avoid repeated or prolonged skin contact. Avoid breathing dust, fume, gas, mist, vapors or spray. Use only outdoors or in a well-ventilated area. Wash thoroughly after handling. Combustible materials may explode or ignite on contact with this
material. Dispose of packaging or containers in accordance with local, regional, national and international regulations.

Pumping Temperature
Not determined.

Maximum Handling Temperature
Not determined.

Maximum Loading Temperature
Not determined.

Conditions for safe storage, including any incompatibilites
Store separately from oxidizers. Take precautions to avoid release to the environment. Store in a well-ventilated place. Keep cool. Odorous and toxic fumes may form from the decomposition of this product if stored at temperatures in excess of 113 deg F (45 deg C) for extended periods of time or if heat sources in excess of 250 deg F (121 deg C) are used. Keep container tightly closed. Do not store near acids. Do not store in open, unlabeled or mislabeled containers. Store locked up. See section "Stability and Reactivity" for incompatible materials.

Maximum Storage Temperature
Not determined.

Specific end use(s)
End uses are listed in an attached exposure scenario when one is required.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters
None known.

Other Exposure Limits
Contains mineral oil. Under conditions which may generate mists, observe the OSHA PEL of 5 mg per cubic meter, ACGIH TWA of 5 mg per cubic meter.

Exposure controls
The use of closed systems is strongly recommended for the handling and transfer of undiluted material. Additional ventilation or exhaust may be required to
maintain air concentrations below recommended exposure limits.

Eye/face protection
Safety glasses. If potential for splash or mist exists, wear chemical goggles or faceshield.

Skin protection
Nitrile. Gloves should always be inspected before each use and discarded if they show tears, pinholes, or signs of wear. Use good industrial hygiene practices to avoid skin contact. If contact with the material may occur wear chemically protective gloves.
Gloves, coveralls, apron, boots as necessary to minimize contact Do not wear rings, watches or similar apparel that could entrap the material and cause a skin
reaction.

Respiratory Protection
Use full face respirator with a combination organic vapor and high efficiency filter cartridge if the recommended exposure limit is exceeded. Use self-contained breathing apparatus for entry into confined space, for other poorly ventilated areas and for large spill clean-up sites. Consult with an industrial hygienist to
determine the appropriate respiratory protection for your specific use of this material. A respiratory protection program compliant with all applicable regulations must be followed whenever workplace conditions require the use of a respirator.

Hygiene Measures
Wash thoroughly after handling this product.

Environmental exposure controls
See section "Accidental Release Measures"" for details.

Stability and reactivity

Reactivity
Carefully review all information provided in sections 10.2 - 10.6.

Chemical stability
Material is normally stable at moderately elevated temperatures and pressures.

Possibility of hazardous reactions
Will not occur.

Conditions to avoid
Do not expose to excessive heat, ignition sources, or oxidizing materials. Overheating

Incompatible materials
Acids. Oxidizing agents.

Hazardous decomposition products
Smoke, carbon monoxide,carbon dioxide, aldehydes and other products of incomplete combustion. Hydrogen sulfide and alkyl mercaptans and sulfides may also be released. Under combustion conditions, oxides of the following elements will be formed: phosphorus, sulfur, zinc.

Disposal considerations

Waste treatment methods
All disposal practices must be in accordance with local, regional, national and international regulations. Do not dispose in landfill.
Dispose of packaging or containers in accordance with local, regional, national and international regulations.