Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 275-702-5 | CAS number: 71617-10-2
Vapour pressure
Administrative data
Link to relevant study record(s)
- Endpoint:
- vapour pressure
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2010-04-21
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.4 (Vapour Pressure)
- GLP compliance:
- no
- Type of method:
- dynamic method
- Temp.:
- 25 °C
- Vapour pressure:
- 0.007 Pa
- Remarks on result:
- other: extrapolated value
- Temp.:
- 189 °C
- Vapour pressure:
- 11 mBar
- Temp.:
- 226.5 °C
- Vapour pressure:
- 63 mBar
- Conclusions:
- The vapour pressure of the test substance was 0.0066 Pa at 25°C.
- Executive summary:
The vapour pressure of the test substance was determined using an Ebulliometer (LIMS:1833, PQ Done:11/03/10, PQ Due:11/09/10) in accordance with EU guideline A.4. The value extrapolated to 25°C was 0.0066 Pa.
The sample gave a colour change during the experiment; therefore, it is possible that sample degradation had occurred. Sample 10423676 gave acceptable data, however, extrapolation of data was required to give vapour pressure data at 25°C and as such, the vapour pressure value reported is outside of the recommended range of the technique and this will affect the accuracy of the determination. Further assessment of the vapour pressure may be possible, if required, using the Gas Saturation Method to allow a more accurate value to be given.
- Endpoint:
- vapour pressure
- Type of information:
- experimental study
- Adequacy of study:
- supporting study
- Study period:
- 1999-02-12
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.4 (Vapour Pressure)
- Deviations:
- not specified
- GLP compliance:
- yes
- Type of method:
- effusion method: vapour pressure balance
- Temp.:
- 20 °C
- Vapour pressure:
- 0 hPa
- Temp.:
- 25 °C
- Vapour pressure:
- 0 hPa
- Temp.:
- 28.5 °C
- Vapour pressure:
- 0 hPa
- Temp.:
- 50 °C
- Vapour pressure:
- 0 hPa
- Conclusions:
- The vapour pressure of test substance ranged from 7.7 x 10^-6 to 2.3 x 10^-4 hPa, for temperatures ranging from 20°C to 50°C.
- Executive summary:
The vapour pressure of test substance was measured using the vapour pressure balance method according to the current EU guideline A4. The vapour pressure values obtained for temperatures ranging from 20°C to 50°C were in the range of 7.7 x 10^-6 to 2.3 x 10^-4 hPa.
- Endpoint:
- vapour pressure
- Type of information:
- experimental study
- Adequacy of study:
- supporting study
- Study period:
- 1999-02-12
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.4 (Vapour Pressure)
- Deviations:
- not specified
- GLP compliance:
- yes
- Type of method:
- dynamic method
- Temp.:
- 150 °C
- Vapour pressure:
- 1.1 hPa
- Temp.:
- 200 °C
- Vapour pressure:
- 11.2 hPa
- Temp.:
- 250 °C
- Vapour pressure:
- 77 hPa
- Conclusions:
- The vapour pressure of test substance was found to be 1.1, 11.2, and 77.0 hPa for temperatures of 150°C, 200°C, and 250°C, respectively.
- Executive summary:
The vapour pressure of test substance was measured using the dynamic method according to the current EU guidedline A.4. Vapour pressure values of 1.1, 11.2, and 77.0 hPa were obtained at temperatures of 150°C, 200°C, and 250°C, respectively.
Referenceopen allclose all
Multiple data-points were recorded between 63 and 11mBar and 226.5 and 189.0°C respectively, to generate a graph to allow vapour pressure determination at 25°C.
Vapour Pressure Data - ASG:10423676
Pressure (mBar) |
Temperature (°C) |
Temperature (K) |
1/T |
Ln P |
63 |
226.5 |
499.7 |
0.002001401 |
4.143134726 |
49 |
222.8 |
496.0 |
0.002016332 |
3.891820298 |
46 |
223 |
496.2 |
0.00201552 |
3.828641396 |
37 |
219.6 |
492.8 |
0.002029427 |
3.610917913 |
31 |
215.1 |
488.3 |
0.002048131 |
3.433987204 |
22 |
205.4 |
478.6 |
0.002089646 |
3.091042453 |
11 |
189 |
462.2 |
0.0021638 |
2.397895273 |
31 |
215 |
488.2 |
0.002048551 |
3.433987204 |
45 |
223.5 |
496.7 |
0.00201349 |
3.80666249 |
Vapour Pressure at 25°C
1/T |
Ln P |
P (mBar) |
P (Pa) |
0.003354016 |
-9.6292160 |
0.00006577860 |
0.006578 |
This method is most appropriate for the evaluation of vapour pressure values ranging from 10^-4 to 10^-2 hPa. The method is not suitable for vapour pressure values above 10^-2 hPa.
Values that deviated significantly from the regression curve were not included in the analysis for the following reasons:
For values significantly too high:
Annealing effects (typical of the first measuring cycle) or substance condensation on the oven cap simulate an increased density of vapour stream.
For values significartly too low:
Substance condensation at the orifice or the oven exhaust duct reduces the cross section of the vapour stream.
This method is most suitable for the evaluation of compounds having a vapour pressure of 1 to 1000 hPa. The most suitable temperature range is 20°C to 250°C.
Description of key information
The vapour pressure of Isopentyl p-methoxycinnamate was 0.0066 Pa at 25°C.
Key value for chemical safety assessment
- Vapour pressure:
- 0.007 Pa
- at the temperature of:
- 25 °C
Additional information
The vapour pressure of test substance was measured in 3 studies. All three studies were performed according to the current EU method A4.
In one of these studies, the vapour pressure balance method was used, whereas the dynamic method was used in the 2 other studies.
In the key study using the dynamic method, vapour pressure values ranging from 11 to 63 mbar (corresponds to hPa) were observed for temperatures ranging from 189.0°C to 226.5°C. The vapour pressure extrapolated at a temperature of 25°C is 0.0066 Pa. In the second study using this method, vapour pressure values of 1.1, 11.2, and 77.0 hPa were obtained at temperatures of 150°C, 200°C, and 250°C, respectively. Both results are scientifically reliable and fall within the same range. As the extrapolated value at 25°C was not given in the second study report, the first study using dynamic method was used as the key study, whereas the second study using this method is used as a supporting study. With the vapour pressure balance method, values in the range of 7.7 x 10-6 to 2.3 x 10-4 hPa were obtained for temperatures ranging from 20°C to 50°C which is in the same range as the values obtained with the dymanic method. Nevertheless, the lowest value of 7.7 x 10-6 hPa is below the limit of this method (10-4hPa).
Therefore the result is less reliable and used as a supporting study.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
