Registration Dossier

Administrative data

First-aid measures

After inhalation: fresh air. Call in physician.
After skin contact: wash of with plenty of water. Remove contaminated clothing. Get medical attention.
In case of eye contact: rise out with plenty of water. Call in ophthalmologist.
If swallowed: give water to drink (two glasses at the most). Seek medical advice immediately. In exceptional cases only, if medical care is not available within one hour, induce vomiting (only in persons who are wide awake and fully conscious), administer activated charcoal (20-40 g in a slurry) and consult a doctor as quickly as possible.

Fire-fighting measures

Suitable extinguishing media:
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Unsuitable extinguishing media
For this substance/mixture no limitations of extinguishing agents are given.

Special hazards arising from the substance or mixture:
Oxidising, Has a fire-promoting effect due to release of oxygen.
Ambient fire may liberate hazardous vapours.
Fire may cause evolution of:
hydrogen bromide

Advice for firefighters:
Special protective equipment for fire-fighters
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Further information
Suppress (knock down) gases/vapours/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or the ground water system.

Accidental release measures

1. Personal precautions, protective equipment and emergency procedures
Advice for non-emergency personnel:
Avoid inhalation of dusts. Avoid substance contact. Ensure adequate ventilation.
Evacuate the danger area, observe emergency procedures, consult an expert.

2. Environmental precautions
Do not empty into drains.

3. Methods and materials for containment and cleaning up
Cover drains. Collect, bind, and pump off spills.
Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts.

Handling and storage

Conditions for safe storage, including any incompatibilities:
Tightly closed. Dry. Separately or together with other oxidising substances only and away from
sources of ignition and heat.Because of their oxidation potential these products can raise the
burning rate of combustible substances substantially or ignite combustible substances on contact
with them. Keep locked up or in an area accessible only to qualified or authorised persons.
Storage temperature: no restrictions.

Transport information

Land transport (ADR/RID)

UN number:
UN 1484
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
UN 1484
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
UN 1484
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Personal protective equipment
Protective clothing should be selected specifically for the working place, depending on concentration and quantity of the hazardous substances handled. The resistance of the protective clothing to chemicals should be ascertained with the respective supplier.

Respiratory protection: required when dusts are generated.
Recommended Filter type: Filter B-(P3)

Hand protection:
full contact:
Glove material: Nitrile rubber
Glove thickness: 0,11 mm
Break through time: > 480 min
splash contact:
Glove material: Nitrile rubber
Glove thickness: 0,11 mm
Break through time: > 480 min
The protective gloves to be used must comply with the specifications of EC irective 89/686/EEC and he resultant standard EN374.
When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves.

Eye protection: required

Hygiene measures. Immediately change contaminated clothing. Apply skin- protective barrier cream. Wash hands and face after working with substance. Do no eat, drink or smoke when using this product. Work under hood . Do not inhale substance.

Stability and reactivity

1. Reactivity:
strong oxidising agent
2. Chemical stability:
The product is chemically stable under standard ambient conditions (room temperature) .
3. Possibility of hazardous reactions:
Risk of explosion with:
Risk of ignition or formation of inflammable gases or vapours with:
semimetals, nonmetals, nonmetallic halides, Reducing agents, combustible substances, ammonium compounds, sulphuric acid, Sulphides, Powdered metals
4. Conditions to avoid:
Strong heating.
5. Incompatible materials:
no information available

Disposal considerations

Product: Chemicals must be disposed of in compliance with the respective national regulations.
Packaging: Product packaging must be disposed of in compliance with the country-specific regulations or must be passed to a packaging return system.