Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

INHALATION: If adverse effects occur, remove to uncontaminated area. IF SYMPTOMS OF OVEREXPOSURE OCCUR, GET MEDICAL ATTENTION.

SKIN CONTACT: Wash contaminated areas with soap and water. IF IRRITATION OCCURS, GET MEDICAL ATTENTION.

EYE CONTACT: Immediately flush eyes with a directed stream of water for at least 15 minutes, forcibly holding eyelids apart to ensure complete irrigation of all eye and lid tissues. IF IRRITATION OCCURS, GET MEDICAL ATTENTION.


Fire-fighting measures

Fire Hazard: Negligible fire hazard.

Extinguishing Media: Use extinguishing agents appropriate for surrounding fire.

Fire Fighting: Move container from fire area if it can be done without risk. Avoid inhalation of material or combustion byproducts. Wear an approved positive-pressure self-contained breathing apparatus operated in pressure demand mode.

Sensitivity to Mechanical Impact: Not sensitive.

Sensitivity to Static Discharge: Not sensitive.

Hazardous Combustion Products: Hydrogen chloride

Accidental release measures

Occupational Release: Shovel dry material into suitable container. Clean up residue with a high-efficiency particulate filter vacuum. Keep out of water supplies and sewers. Releases should be reported, if required, to appropriate agencies.

Handling and storage

Storage Conditions: Store and handle in accordance with all current regulations and standards. Keep container tightly closed and properly labeled. Keep dry. Keep separated from incompatible substances.

Handling Procedures: Avoid breathing dust. Wash thoroughly after handling. During processing use only with adequate ventilation. Do not reuse containers. Use methods to minimize dust.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not regulated
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not regulated
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not regulated
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not regulated
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Recommended Exposure Limit: 1 mg/m3 recommended Time Weighted Average 8 hour (Manufacturer recommended Occupational Exposure Limit)

ENGINEERING CONTROLS: Provide local exhaust ventilation where dust or mist may be generated. Ensure compliance with applicable exposure limits.


Eye Protection: Safety glasses or goggles are recommended when there is a potential for eye contact.

Skin and Body Protection: Wear protective clothing to minimize skin contact. Use high-efficiency particulate filter vacuum to remove dust from clothing.

Hand Protection: Wear appropriate chemical resistant gloves. Protective Material Types: Tyvek®, Rubber, Nitrile, Neoprene.

Respiratory Protection: An approved respirator with high efficiency particulate air filters / cartridges may be permissible under certain circumstances where airborne concentrations are expected to exceed exposure limits, or when symptoms have been observed that are indicative of overexposure. When an air purifying respirator is not adequate for spills and/or emergencies of unknown concentrations, an approved self-contained breathing apparatus operated in the pressure demand mode is required. A respiratory protection program that meets applicable regulatory requirements must be followed whenever workplace conditions warrant use of a respirator.

Stability and reactivity

Reactivity/ Stability: Stable at normal temperatures and pressures.

Conditions to Avoid: Keep away from heat and flame. Avoid contact with incompatible materials.

Incompatibilities/ Materials to Avoid: Incompatible with oxidizing agents

Hazardous Decomposition Products: Hydrogen chloride

Hazardous Polymerization: Will not occur.

Disposal considerations

Waste from material: Reuse or reprocess, if possible. Dispose in accordance with all applicable regulations.