Registration Dossier

Administrative data

First-aid measures

Description of first aid measures

General information
Remove soiled or soaked clothing immediately
In any case show the physician the Safety Data Sheet

After inhalation
When inhaled remove to fresh air and seek medical aid.

After contact with skin
In case of contact with skin wash off immediately with soap and water

After contact with eyes
In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice

After ingestion
Get medical treatment

Indication of any immediate medical attention and special treatment needed

Treat symptomatically.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media
water spray jet
Extinguishing media that must not be used for safety reasons
carbon dioxide
dry powder

Special hazards arising from the substance or mixture
In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO)
Nitrous gases (NOx)
Combustion gases of organic materials must in principle be graded as inhalation poisons.

Advice for firefighters

Special protective equipment for firefighting
Use self-contained breathing apparatus

Further information
Wear protective equipment.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Ensure adequate ventilation.
Use personal protective clothing.

Environmental precautions
Do not discharge into the drains/surface waters/groundwater.

Methods and material for containment and cleaning up
Pick up with binding agent and sweep up. Rinse away with warm water and wetting agent
Dispose of as prescribed

Handling and storage

Precautions for safe handling

Advice on safe handling
Ensure adequate ventilation.

Advice on protection against fire and explosion
Observe the general rules of industrial fire protection

Conditions for safe storage, including any incompatibilities

Requirements for storage areas and containers
Do not use steel containers.
Do not use aluminium containers.

Further information on storage conditions
Keep container tightly closed in a cool, well-ventilated place

Transport information

Land transport (ADR/RID)

Shippingopen allclose all
not restricted

Inland waterway transport (ADN(R))

Shippingopen allclose all
not restricted

Marine transport (IMDG)

not restricted

Air transport ICAO/IATA

not restricted
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters

Exposure limit values
Exposure limit values are not available.

DNEL/DMEL values
DNEL/DMEL values are not available.

PNEC values
PNEC values are not available.

Exposure controls

General protective measures
Avoid contact with eyes and skin

Hygiene measures
Observe the usual precautions when handling chemicals.
Do not eat or drink during work time.
Keep away from foodstuffs and beverages.
Wash hands before breaks and after work.
Remove soiled or soaked clothing immediately.

Hand protection : For long-term exposure:
Butyl rubber gloves.
Minimum breakthrough time / gloves : 480 min
Minimum thickness / gloves 0,7 mm
For short-term exposure (splash protection):
Nitrile rubber gloves.
Minimum breakthrough time / gloves : 30 min
Minimum thickness / gloves 0,4 mm
These types of protective gloves are offered by various manufacturers. Please note the manufacturers´ detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.

Eye protection : safety glasses

Body protection : protective clothing

Stability and reactivity

Chemical stability
Under normal conditions the product is stable.

Possibility of hazardous reactions
Corrodes aluminium.

Conditions to avoid
None known.

Incompatible materials
not known

Hazardous decomposition products
When handled and stored appropriately, no dangerous decomposition products are known

Disposal considerations

Waste treatment methods
In accordance with local authority regulations, take to special waste incineration plant

Uncleaned packaging
Regulations concerning reuse or disposal of used packaging materials must be observed.