Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

General Information:
Seek medical assistance if discomfort continues.

After Inhalation:
Remove the casualty into fresh air and keep him calm.

After contact with skin:
In case of contact with skin, clean with soap and water.

After contact with eyes:
Rinse the affected eye with plenty of water, at the same time keep the unaffected eye well protected.

After ingestion:
If swallowed do not induce vomiting, seek medical advice and show the safety data sheet or label.

Most important symptoms and effects, both acute and delayed:
No symptoms currently known.
No hazards known at this time.

Indication of any immediate medical attention and special treatment needed:
Treat symtomatically.

Fire-fighting measures

Suitable extinguishing media:
water spray jet
foam

Extinguishing media that must not be used for safety reasons:
Full water jet
carbon dioxide
dry powder

Special hazards arising from the substance:
In case of fires hazardous combustion gases are formed:
carbon monoxide
carbon dioxide
nitrogene oxides

Advice for firefighters:
Use self-contained breathing apparatus.
Wear protective equipment.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
Wear suitable personal protective equipment.

Environmental precautions:
Do not allow entry to drains, water courses or soil.

Methods and material for containment and cleaning up:
Take up mechanically.
Avoid dust formation and electrical charging (sparking) because dust explosion might occur.
When picked up, treat material as prescribed under heading "Disposal considerations".

Handling and storage

Advice on safe handling:
When used and handled appropriately no special measures are needed.
Avoid dust formation.

Advice on protection against fire and explosion:
Take precautionary measures against electrostatic charges - earthing necessary during loading operations.
Keep away from sources of ignition
Dust can form an explosive mixture with air.

Further information on storage conditions
Keep container tightly closed.

Transport information

Land transport (ADR/RID)

Shippingopen allclose all
Class:
not restricted
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

Shippingopen allclose all
Class:
not restricted
Remarksopen allclose all

Marine transport (IMDG)

Class:
not restricted
Remarksopen allclose all

Air transport ICAO/IATA

Class:
not restricted
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters:
Exposure limit values are not available.
DNEL/DMEL values are not available
PNEC values are not available.

Exposure controls:
Observe the usual precautions for handling chemicals.
Wash hands before breaks and after work.
Use barrier skin cream.
Remove soiled or soaked clothing immediately and clean thoroughly before using again.

Respiratory protection:
Wear dust mask when handling large quantities

Hand protection :
Nitrile rubber gloves.
Minimum breakthrough time (glove): not determined
Minimum thickness (glove): not determined
Observe the information of the glove manufacturers on
permeability and breakthrough times and other workplace requirements

Eye protection :
safety glasses

Body protection :
working clothes

Stability and reactivity

Chemical stability:
stable

Possibility of hazardous reactions:
When handled and stored appropriately no dangerous reactions are known.

Conditions to avoid:
None known.

Incompatible materials:
Not known.

Disposal considerations

Waste treatment methods:
Special waste incineration plant, after consultation with operators.
Packaging that cannot be cleaned should be disposed of as product waste.