Registration Dossier

Administrative data

First-aid measures

Description of first aid measures
· After inhalation:Immediate medical attention is not required. Remove to fresh air.
· After skin contact: Immediate medical attention is not required. Wash skin with soap and water.
· After eye contact: Rinse thoroughly with plenty of water, also under the eyelids. Use lukewarm water if
possible. Remove contact lenses, if present and easy to do. Continue rinsing. If eye
irritation persists: Get medical advice/attention.
· After swallowing: Rinse mouth. Drink plenty of water. If a large quantity has been ingested or you feel
unwell, get medical advice/attention.

Fire-fighting measures

Extinguishing media
· Suitable extinguishing agents: Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
·Unsuitable extinguishing media: Do not use a solid water stream as it may scatter and spread fire.
Special hazards arising from the substance or mixture
Hazardous combustion products: Carbon monoxide (CO), Carbon dioxide (CO2).
Advice for firefighters
· Protective equipment: Wear self-contained breathing apparatus and protective suit.

Accidental release measures

Personal precautions, protective equipment and emergency procedures: Wear tightly sealed goggles. Wear gloves, protective clothing and rubber boots for hygienic reasons. Ensure adequate ventilation, especially in confined areas.
Environmental precautions: Do not allow into any sewer, on the ground or into any body of water. Local authorities should be advised if significant spillages cannot be contained. See Section 12 for additional ecological information.
Methods and material for containment and cleaning up:
Prevent further leakage or spillage if safe to do so.
Small spill: Absorb with earth, sand or other non-combustible material and transfer to containers for
later disposal
Large spill: Pump up the product into a spare container suitably labelled.
Methods for cleaning up
Pick up and transfer to properly labelled containers. Clean contaminated surface thoroughly. After cleaning, flush away traces
with water.

Handling and storage

Precautions for safe handling: Ensure adequate ventilation, especially in confined areas. Avoid: aerosol or mist formation.
Conditions for safe storage, including any incompatibilities
General Hygiene Considerations: Wash hands before breaks and after work. Avoid contact with eyes.
Conditions for safe storage, including any incompatibilities: Keep container tightly closed. Keep in a dry place.
Specific end use(s): This information is supplied in the present Safety Data Sheet.

Transport information

Land transport (ADR/RID)

UN number:
The substance is not classified as dangerous goods.
Shippingopen allclose all
Classification code:
.
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
The substance is not classified as dangerous goods.
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
The substance is not classified as dangerous goods.
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
The substance is not classified as dangerous goods.
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls
Appropriate engineering controls: Emergency shower and eye wash facilities must exist on work place.

Individual protection measures, such as personal protective equipment
Eye/face protection Tight sealing safety goggles.
Hand Protection Wear protective gloves. Nitrile rubber, NBR. Chloroprene rubber, CR.
Skin and body protection Normal work clothes for the chemical industry (long legs and sleeves).
Respiratory protection None under normal use conditions.
Environmental exposure controls
Not determined.

Stability and reactivity

Reactivity: There exists no specific test data for this product. For further information, see the subsequent subsections of this chapter.
Chemical stability: Stable under normal conditions. In contact with air/oxygen the product will slowly form peroxides.
Possibility of hazardous reactions: In contact with air/oxygen the product will slowly form peroxides.
Conditions to avoid: None known.
Incompatible materials: Oxidizing substances including air (oxygen).
Hazardous decomposition products:Thermal decomposition can lead to release of irritating and toxic gases and vapours.

Disposal considerations

Waste treatment methods
Waste from residues/unused products: This material and its container must be disposed of as hazardous waste. Incinerate at a licensed installation. Disposal should be in accordance with applicable regional, national and local laws and regulations.
Contaminated packaging: Contaminated packaging materials must be disposed of in the same manner as the product. Thoroughly emptied and clean
packaging may be recycled. Methods for cleaning up: Recommended use: Water (with cleaning agent).
Waste codes / waste designations according to EWC / AVV:
Waste codes should be assigned by the user based on the application for which the product was used. Recommended Use:
EWC 16 03 05*.