Registration Dossier

Administrative data

First-aid measures

General advice :
- Show this safety data sheet to the doctor in attendance.
- First aider needs to protect himself.
- Place affected clothing in a sealed bag for subsequent decontamination.
If inhaled :
- Move to fresh air.
- If breathing is difficult, give oxygen.
- If breathing has stopped, apply artificial respiration.
- Consult a physician.
Skin contact :
- Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes.
- Seek medical advice.
- Wash contaminated clothing before re-use.
Eye contact :
- Hold eyelids apart and flush eyes with plenty of water for at least 15 minutes.
- Get medical attention.
Ingestion :
- Do not induce vomiting without medical advice.
- If victim is conscious:
- Rinse mouth with water.
- Keep at rest.
- Vomiting may occur spontaneously
- Lay victim on side.
- Seek medical advice

Fire-fighting measures

Extinguishing media :
- Suitable extinguishing media : Dry chemical
- Alcohol-resistant foam
- Water mist
- Carbon dioxide (CO2)
Special hazards arising from the substance or mixture :
Specific hazards during firefighting :
- Under fire conditions: Will burn
- Container may explode if heated.
- Harmful or toxic vapours are released.
- Highly irritating vapours are released.
- Flash back possible over considerable distance.
- Hazardous decomposition products formed under fire conditions.
-Carbon oxides
-Oxides of phosphorus
Advice for firefighters
- Specific fire fighting methods : Evacuate personnel to safe areas.
- Stay upwind.
- Cool containers / tanks with water spray.
-Collect contaminated fire extinguishing water separately. This must not be discharged into drains.

Accidental release measures

Personal precautions, protective equipment and emergency procedures :
- Evacuate area.
- Ventilate the area.
- Eliminate all ignition sources if safe to do so.
- Use personal protective equipment.
Environmental precautions :
- Do not let product enter drains.
- Do not flush into surface water or sanitary sewer system.
- Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
Methods and materials for containment and cleaning up :
- Recovery : Stop leak if safe to do so.
- Dam up with sand or inert earth (do not use combustible materials).
- Cover spill area with foam to reduce vapors
- Pump or collect any free spillage into an appropriate closed container.
- Soak up with inert absorbent material.
- Shovel into suitable container for disposal.
- Never return spills in original containers for re-use.
- Use only non-sparking tools.
Decontamination/cleaning :
- Wash off with plenty of water.
- Recover the cleaning water for subsequent disposal.
- Decontaminate tools, equipment and personal protective equipment in a segregated area.
Disposal :
- Dispose of in accordance with local regulations.

Handling and storage

Advice on safe handling and usage :
- The product must only be handled by specifically trained employees.
- Avoid inhalation of vapour or mist.
- Avoid contact with skin and eyes.
- Do not use sparking tools.
- Ensure all equipment is electrically grounded before beginning transfer operations.
- Keep away from fire, sparks and heated surfaces.
- Do not mix with incompatible materials (See list section 10).
Conditions for safe storage, including any incompatibilities :
Storage conditions
- Recommended : Keep in a dry, cool and well-ventilated place.
- Keep tightly closed.
- To be avoided : Keep away from open flames, hot surfaces and sources of ignition.
- Keep away from incompatible materials to be indicated by the manufacturer
Incompatible products :
- Strong oxidizing agents
- humid air and water
Packaging Measures
Packaging conditions :
- Store in original container.
Packaging materials - Recommended :
- Plastic materials.
Storage stability
Storage temperature :
- no data available

Transport information

Land transport (ADR/RID)

UN number:
Not regulated
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not regulated
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not regulated
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not regulated
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering measures : Effective exhaust ventilation system
Hand protection :
- Impervious gloves
- Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time.
- Gloves must be inspected prior to use.
- Gloves should be discarded and replaced
Eye protection :
- Safety glasses with side-shields
- Tightly fitting safety goggles
Skin and body protection :
- Protective suit
- Choose body protection according to the amount and concentration of the dangerous substance at the work place.
Protective measures :
- Ensure that eyewash stations and safety showers are close to the workstation location.
- The protective equipment must be selected in accordance with current local standards and in cooperation with the supplier of the protective equipment. Selection of appropriate personal protective equipment should be based on an evaluation of the performance characteristics of the protective equipment relative to the task(s) to be performed, conditions present, duration of use, and the potential hazards and/or risks that may occur during use.

Stability and reactivity

- no data available
Chemical stability
- Stable under recommended storage conditions. Decomposes upon contact with air.
Polymerisation :
- Hazardous polymerisation does not occur.

Disposal considerations

Prohibition :
- Should not be released into the environment.
Advice on Disposal :
- Refer to manufacturer/supplier for information on recovery/recycling.
- Dispose of as hazardous waste in compliance with local and national regulations.
- The product should not be allowed to enter drains, water courses or the soil.