Registration Dossier

Administrative data

First-aid measures

General information - In all cases keep the victim at physical and psychic rest and keep warm. Always seek medical advice promptly.
Inhalation - Break off the exposition, move the victim to fresh air. If breathing stops, give artificial respiration mouth-to-mouth.
Skin contact - Wash affected area with plenty of water and soap. Removed contaminated clothing immediately.
Eye contact - Flush eyes with moderate water stream. Never neutralize.
Ingestion - Rinse mouth with fresh water, give to drink some 0,2-0,3 l water containing active carbon (e.g. 5 tbs Carbsorb) and within not more than one hour induce vomiting (meaningless if induced later). Give active carbon repeatedly, no matter if the vomiting was induced or not. Seek medical advice. Do not induce vomiting in case of unconsciousness, convulsions or bad physical conditions.

Fire-fighting measures

Suitable extinguishing media - Alcohol-resistant foam concentrate, water mist, water spray, powders, carbon dioxide.
Special hazards - Salts, primary explosives like, are formed with alkalis. In case of burning, oxides of nitrogen are formed.
Special protective equipment for fire-fighters - Self-contained breathing apparatus and protective clothing.

Accidental release measures

Prevent access to unauthorised persons to the place of leakage. Use personal protective equipment. Avoid release to surface and ground water, prevent spraying of product by wind. If it is not possible, inform police and firefighters.
Methods for cleaning up:Collect and place spilled product in impermeable packages, sweep up the place carefully, collect contaminated earth. Incinerate after adding of wood only in the approved place in accordance with national regulations.

Handling and storage

This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 18(4). Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each Manufacturing site.
Written confirmation of application of Strictly Controlled Conditions has been received from everx affected Distributor and Downstream Manufacturer/User of the Registrantś intermediate.

Avoid contact with skin and eyes. Avoid breathing dust. Observe general personal hygiene measures, wear suitable protective clothing and gloves. After handling wash with water and soap. Do not expose to heat efforts. Ensure drink water for the first-aid.
Storage conditions - Store in original tightly closed containers. Keep away from sources of heat.

Transport information

Land transport (ADR/RID)

UN number:
1598
Proper shipping name and description:
DINITRO-o-CRESOL
Language:
English
Class:
6.1
Classification code:
T2
Packaging group:
II
Labels:
6.1
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
1598
Proper shipping name and description:
Dinitro-o-cresol
Class:
6.1
Packaging group:
II
EmS code:
F-A, S-A
Labels:
6.1, MARINE POLLUTANT
Marine pollutant
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
1598
Proper shipping name and description:
Dinitro-o-cresol, solid
Class:
6.1
Packaging group:
II
Labels:
Toxic
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 18(4). Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each Manufacturing site.
Written confirmation of application of Strictly Controlled Conditions has been received from everx affected Distributor and Downstream Manufacturer/User of the Registrantś intermediate.
Exposure Limits - Average limit value: 0,2 mg/m3. Treshold limit value: 0,4 mg/m3. Occupational exposure controls - Use process enclosures, local exhaust, general ventilation.
Personal protection- dust filter mask, respirator against NOx E2 with filter NO-P3 in case of fire, rubber gloves, protective goggles or face shield, protective clothing, flameproof if needed, protective boots, cap.

Stability and reactivity

Chemical stability - Stable under normal conditions.
Conditions to avoid - High temperature.
Materials to avoid - Oxidizing agents, reducing agents, strong bases.
Hazardous decomposition products - Oxides of nitrogen and carbon.

Disposal considerations

Incinerate after adding of wood only in the approved place in accordance with national regulations. Observe national or regional provisions relating to disposal of waste.