4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane, reaction products with 3-aminomethyl-3,5,5-trimethylcyclohexylamine

Guidance on Safe Use

First-aid measures

General advice: First Aid responders should pay attention to self-protection and use the recommended protective clothing (chemical resistant gloves, splash protection). If potential for exposure exists refer to specific personal protective equipment.

Inhalation: Move person to fresh air; if effects occur, consult a physician.

Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing. Seek medical attention if symptoms occur or irritation persists. Wash clothing before reuse. Discard items which cannot be decontaminated, including leather articles such as shoes, belts and watchbands. Suitable emergency safety shower facility should be immediately available.

Eye Contact: Wash immediately and continuously with flowing water for at least 30 minutes. Remove contact lenses after the first 5 minutes and continue washing. Obtain prompt medical consultation, preferably from an ophthalmologist. Suitable emergency eye wash facility should be immediately

available.

Ingestion: Do not induce vomiting. Give one cup (8 ounces or 240 ml) of water or milk if available and transport to a medical facility. Do not give anything by mouth unless the person is fully conscious.

Fire-fighting measures

Suitable extinguishing media

Water fog or fine spray. Dry chemical fire extinguishers. Carbon dioxide fire extinguishers. Foam. Alcohol resistant foams (ATC type) are preferred. General purpose synthetic foams (including AFFF) or protein foams may function, but will be less effective.

Special hazards arising from the substance or mixture

Hazardous Combustion Products: During a fire, smoke may contain the original material in addition to combustion products of varying composition which may be toxic and/or irritating. Combustion products may include and are not limited to: Carbon monoxide. Carbon dioxide.

Unusual Fire and Explosion Hazards: Violent steam generation or eruption may occur upon application of direct water stream to hot liquids.

Advice for firefighters

Fire Fighting Procedures: Keep people away. Isolate fire and deny unnecessary entry. Consider feasibility of a controlled burn to minimize environment damage. Foam fire extinguishing system is preferred because uncontrolled water can spread possible contamination. Burning liquids may be extinguished by dilution with water. Do not use direct water stream. May spread fire. Burning liquids may be moved by flushing with water to protect personnel and minimize property damage. Avoid accumulation of water. Product may be carried across water surface spreading fire or contacting an ignition source. Contain fire water run-off if possible. Fire water run-off, if not contained, may cause environmental damage.

Special Protective Equipment for Firefighters: Wear positive-pressure self-contained breathing apparatus (SCBA) and protective fire fighting clothing (includes fire fighting helmet, coat, trousers, boots, and gloves). Avoid contact with this material during fire fighting operations. If contact is likely, change to full chemical resistant fire fighting clothing with self-contained breathing apparatus. If this is not available, wear full chemical resistant clothing with self-contained breathing apparatus and fight fire from a remote location. For protective equipment in post-fire or non-fire clean-up situatons, refer to the relevant sections.

Accidental release measures

Personal precautions, protective equipment and emergency procedures: Evacuate area. Only trained and properly protected personnel must be involved in clean-up operations. Keep upwind of spill. Ventilate area of leak or spill.

Controls and Personal Protection.

Environmental precautions: Prevent from entering into soil, ditches, sewers, waterways and/or groundwater.

Methods and materials for containment and cleaning up: Contain spilled material if possible. Collect in suitable and properly labeled container. Absorb with materials such as:  Sand

Handling and storage

Do not get in eyes, on skin, on clothing.  Avoid prolonged or repeated contact with skin.  Avoid breathing vapor or mist.  Do not swallow.  Keep container closed.  Use with adequate ventilation.  Wash thoroughly after handling.  Spills of these organic materials on hot fibrous insulations may lead to lowering of the autoignition temperatures possibly resulting in spontaneous combustion.

Store in a cool, dry place.  Do not store in:  Zinc.  Copper.  Galvanized metals.  

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:

UN2289

Shipping information

Proper shipping name and description:

ISOPHORONEDIAMINE SOLUTION

Chemical name:

3-AMINOMETHYL-3,5,5-TRIMETHYLCYCLOHEXYLAMINE

SpecialProvisions

Inland waterway transport (UN RTDG/ADN(R))

UN number:

UN2289

Shipping information

Proper shipping name and description:

ISOPHORONEDIAMINE SOLUTION

Chemical name:

3-aminomethyl-3,5,5-trimethyl-cyclohexylamine

Remarks

Marine transport (UN RTDG/IMDG)

UN number:

UN2289

Shipping information

Proper shipping name and description:

ISOPHORONEDIAMINE SOLUTION

Chemical name:

3-AMINOMETHYL-3,5,5-TRIMETHYLCYCLOHEXYLAMINE

Remarks

Air transport (UN RTDG/ICAO/IATA)

Shipping information

Proper shipping name and description:

ISOPHORONEDIAMINE SOLUTION

Chemical name:

3-aminomethyl-3,5,5-trimethyl-cyclohexylamine

Remarks

SpecialProvisions

Exposure controls / personal protection

Personal Protection

Eye/Face Protection: Use chemical goggles.

Skin Protection: Use protective clothing chemically resistant to this material. Selection of specific items such as face shield, boots, apron, or full body suit will depend on the task.

Hand protection: Use gloves chemically resistant to this material.

Respiratory Protection: Respiratory protection should be worn when there is a potential to exceed the exposure limit requirements or guidelines. If there are no applicable exposure limit requirements or guidelines, use an approved respirator. Selection of air-purifying or positive-pressure supplied-air will depend on the specific operation and the potential airborne concentration of the material. For emergency conditions, use an approved positive-pressure self-contained breathing apparatus.

Ingestion: Avoid ingestion of even very small amounts; do not consume or store food or tobacco in the work area; wash hands and face before smoking or eating.

Engineering Controls

Ventilation: Use engineering controls to maintain airborne level below exposure limit requirements or guidelines. If there are no applicable exposure limit requirements or guidelines, use only with adequate ventilation. Local exhaust ventilation may be necessary for some operations.

Stability and reactivity

Reactivity

No dangerous reaction known under conditions of normal use.

Chemical stability

Unstable at elevated temperatures.

Possibility of hazardous reactions

Polymerization will not occur.

Conditions to Avoid: Avoid temperatures above 250 °C. Exposure to elevated temperatures can cause product to decompose.

Incompatible Materials: Avoid contact with: Strong acids. Strong oxidizers. Avoid contact with metals such as: Aluminum. Copper. Avoid unintended contact with: Halogenated hydrocarbons.

Hazardous decomposition products

Decomposition products depend upon temperature, air supply and the presence of other materials. Decomposition products can include and are not limited to: Ammonia. Nitrogen oxides.

Disposal considerations

This product, when being disposed of in its unused and uncontaminated state should be treated as a hazardous waste according to EC Directive 2008/98/EC.  Any disposal practices must be in compliance with all national and provincial laws and any municipal or local by-laws governing hazardous waste.  For used, contaminated and residual materials additional evaluations may be required.  Do not dump into any sewers, on the ground, or into any body of water.  

The definitive assignment of this material to the appropriate EWC group and thus its proper EWC code will depend on the use that is made of this material. Contact the authorized waste disposal services.