Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 451-190-0 | CAS number: 156558-98-4
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Density
Administrative data
Link to relevant study record(s)
- Endpoint:
- density, other
- Type of information:
- read-across from supporting substance (structural analogue or surrogate)
- Remarks:
- 6 substances available for read across
- Adequacy of study:
- weight of evidence
- Justification for type of information:
- see the attached justification in section 13 for the full details.
- Reason / purpose for cross-reference:
- read-across source
- Reason / purpose for cross-reference:
- read-across source
- Reason / purpose for cross-reference:
- read-across source
- Reason / purpose for cross-reference:
- read-across source
- Reason / purpose for cross-reference:
- read-across source
- Reason / purpose for cross-reference:
- read-across source
- Key result
- Type:
- density
- Density:
- 0.97 g/cm³
- Temp.:
- 20 °C
- Remarks on result:
- other: Hatcol 3331
- Key result
- Type:
- density
- Density:
- 0.99 g/cm³
- Temp.:
- 20 °C
- Remarks on result:
- other: Hatcol 3344
- Key result
- Type:
- density
- Density:
- 0.99 g/cm³
- Temp.:
- 20 °C
- Remarks on result:
- other: Hatcol 5236
- Key result
- Type:
- density
- Density:
- 1.06 g/cm³
- Temp.:
- 20 °C
- Remarks on result:
- other: C5FA tetraester
- Key result
- Type:
- density
- Density:
- 0.97 g/cm³
- Temp.:
- 20 °C
- Remarks on result:
- other: C10FA tetraester
- Key result
- Type:
- density
- Density:
- 0.99 g/cm³
- Temp.:
- 20 °C
- Remarks on result:
- other: C9iso FA tetraester
- Conclusions:
- The read across for substance, CAS: 156558-98-4; EC: 451-190-0; is based upon the analogous substances to which basic form, degree of substitution of functional groups is not considered to effect the proposed read across for the endpoint of density. The density for the substance based on the mean of the information available is deemed to be 0.995°C.
- Endpoint:
- density
- Remarks:
- density
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 10 October 2002
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: Study performed in accordance with OECD & EU test guidelines in compliance with GLP.
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 109 (Density of Liquids and Solids)
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.3 (Relative Density)
- GLP compliance:
- yes
- Type of method:
- pycnometer method
- Key result
- Type:
- density
- Density:
- 0.97 g/cm³
- Temp.:
- 20 °C
- Conclusions:
- In conclusion, the density of Hatcol 3331 is 0.97 g/cm3 (0.97E+03 kg/m3)
The D204 is 0.97. - Executive summary:
The determination of the density (liquid) was based on the EEC-Directive 92/69 EEC, A.3"Relative density" (1992) and on the OECD Guideline no. 109 "Density of liquids and solids"(1995).
The density ofthe liquid test substance Hatcol 3331 is 0:97 g/cm3(0.97*103 kg/m3)
A glass pycnometer with a nominal volume of 10 ml was used.
Temperature of measurement was 20.0 ± 0.5°C.
The D204is 0.97.
- Endpoint:
- density
- Remarks:
- density
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 10 October 2002
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: Study performed in accordance with OECD & EU test guidelines in compliance with GLP.
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 109 (Density of Liquids and Solids)
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.3 (Relative Density)
- GLP compliance:
- yes
- Type of method:
- pycnometer method
- Key result
- Type:
- density
- Density:
- 0.99 g/cm³
- Temp.:
- 20 °C
- Conclusions:
- In conclusion, the density of Hatcol 3344 is 0.99 g/cm3 (0.99*103 kg/m3).
- Executive summary:
The determination of the density (liquid) was based on the EEC-Directive 92/69 EEC, A.3"Relative density” (1992) and on the OECD Guideline no. 109 "Density ofliquids and solids"(1995).
The density of the liquid test substance Hatcol 3344 is 0.99 g/cm3(0.99*103kg/m3).
A glass pycnometer with a nominal volume of 10 ml was use.
Temperature of measurement was 20.0 ± 0.5°C.
The D420is 0.99.
- Endpoint:
- density
- Remarks:
- density
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 10 October 2002
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: Study performed in accordance with OECD & EU test guidelines in compliance with GLP.
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 109 (Density of Liquids and Solids)
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.3 (Relative Density)
- GLP compliance:
- yes
- Type of method:
- pycnometer method
- Key result
- Type:
- density
- Density:
- 0.99 g/cm³
- Temp.:
- 20 °C
- Conclusions:
- In conclusion, the density of Hatcol 5236 is 0.99 g/cm3 (0.99*103 kg/m3)
The D420 is 0.99. - Executive summary:
The determination of the density (liquid) was base on the EEC-Directive 92/69 EEC, A.3 “Relative density" (1992) and on the OECD Guideline no. 109 "Density of liquids and solids” (1995).
The density of the liquid test substance Hatcol 5236 is 0.99 g/cm3(0.99*103kg/m3).
A glass pycnometer with a nominal volume of 10 ml was used.
Temperature of measurement was 20.0 ± 0.5°C
The D420 is 0.99.
- Endpoint:
- density
- Remarks:
- density
- Type of information:
- (Q)SAR
- Adequacy of study:
- key study
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- results derived from a valid (Q)SAR model and falling into its applicability domain, with adequate and reliable documentation / justification
- Justification for type of information:
- Valid QSAR model
- Principles of method if other than guideline:
- Calculation with use of SPARC online calculator v 4.6, self interaction physical process models for estimation of density.
- GLP compliance:
- no
- Type of method:
- other: QSAR
- Key result
- Type:
- density
- Density:
- 0.97 g/cm³
- Temp.:
- 20 °C
- Endpoint:
- density
- Remarks:
- density
- Type of information:
- (Q)SAR
- Adequacy of study:
- key study
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- results derived from a valid (Q)SAR model and falling into its applicability domain, with adequate and reliable documentation / justification
- Justification for type of information:
- Valid QSAR model
- Principles of method if other than guideline:
- Calculation with use of SPARC online calculator v 4.6, self interaction physical process models for estimation of density.
- GLP compliance:
- no
- Type of method:
- other: QSAR
- Key result
- Type:
- density
- Density:
- 1.06 g/cm³
- Temp.:
- 20 °C
- Endpoint:
- density
- Remarks:
- density
- Type of information:
- (Q)SAR
- Adequacy of study:
- key study
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- results derived from a valid (Q)SAR model and falling into its applicability domain, with adequate and reliable documentation / justification
- Justification for type of information:
- Valid QSAR model
- Principles of method if other than guideline:
- Calculation with use of SPARC online calculator v 4.6, self interaction physical process models for estimation of density.
- GLP compliance:
- no
- Type of method:
- other: QSAR
- Key result
- Type:
- density
- Density:
- 0.99 g/cm³
- Temp.:
- 20 °C
Referenceopen allclose all
Table 1 Determinations of the density of Hatcol 3331
Measurement |
Temperature of measurement [°C] |
Density [g/cm3] |
1 |
20.0 |
0.968 |
2 |
20.0 |
0.968 |
Mean: |
|
0.968 |
Table 1 Determinations of the density of Hatcol 3344
Measurement |
Temperature of measurement [°C] |
Density [g/cm3] |
1 |
20.0 |
0.992 |
2 |
20.0 |
0.993 |
Mean: |
|
0.992 |
APPENDIX
Individual measurements |
||
|
Experiment 1 |
Experiment 2 |
PYCNOMETER EMPTY (A) |
25.9022 g |
25.9022 g |
TEMP. MILLI-Q WATER |
20.0°C |
20.0°C |
PYCNOMETER + MILLI-Q WATER (B) |
35.6743 g |
35.6691 g |
TEMP. TEST SUBSTANCE |
20.0°C |
20.0°C |
PYCNOMETER + TEST SUBSTANCE (C) |
35.6089 g |
35.6177 g |
Calculations
1. SMW (resulting from the test temperature) = 0.9982 g/cm3
2. Volume pycnometer = D = (B – A) / SMW
Exp. 1: D = 9.7897 cm3
Exp. 2: D = 9.7845 cm3
Mean D = 9.781 cm3
3. Density test substance = (C – Amean) / Dmean
Exp. 1: density = 0.992 g/cm3
Exp. 2: density = 0.993 g/cm3
Mean density = 0.99 g/cm3
Table 1 Determinations of the density of Hatcol 5236
Measurement |
Temperature of measurement [°C] |
Density [g/cm3] |
1 |
20.0 |
0.993 |
2 |
20.0 |
0.993 |
Mean: |
0.993 |
For detailed description of the model and its applicability, see "Any other information on materials and methods incl. tables".
For detailed description of the model and its applicability, see "Any other information on materials and methods incl. tables".
For detailed description of the model and its applicability, see "Any other information on materials and methods incl. tables".
Description of key information
The read across for substance, CAS: 156558-98-4; EC: 451-190-0; is based upon the analogous substances to which basic form, degree of substitution of functional groups is not considered to effect the proposed read across for the endpoint of density. The density for the substance based on the mean of the information available is deemed to be 0.995°C.
Key value for chemical safety assessment
- Relative density at 20C:
- 0.98
Additional information
HATCOL 5236:
The density of the liquid test substance Hatcol 5236 is 0.99 g/cm3(0.99*103kg/m3). A glass pycnometer with a nominal volume of 10 ml was used. Temperature of measurement was 20.0 ± 0.5°C. The D420 is 0.99.
HATCOL 3344
The density of the liquid test substance Hatcol 3344 is 0.99 g/cm3(0.99*103kg/m3). A glass pycnometer with a nominal volume of 10 ml was used. Temperature of measurement was 20.0 ± 0.5°C. The D420 is 0.99.
HATCOL 3331:
The density of the liquid test substance Hatcol 3331 is 0.97 g/cm3(0.97*103 kg/m3) A glass pycnometer with a nominal volume of 10 ml was used. Temperature of measurement was 20.0 ± 0.5°C. The D204 is 0.97.
QSAR calculation:
Additionally, the density of the substance Pentaerythritol tetraesters of n-C5, n-C7, n-C8, i-C9 and n- C10 fatty acids (EC 451-190-0) was determined by QSAR calculation with SPARC (v4.6) for the two exemplary components covering both ends of the substance specification, n-C5 tetra (1.06 g/cm³ at 20 °C), n-C10 tetra (0.97 g/cm³ at 20 °C) and the component i-C9 tetra (0.99 g/cm³ at 20 °C).
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.