Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 231-545-4 | CAS number: 7631-86-9
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Manufacture
Documentsopen allclose all
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Related assessment:
- use assessed in a joint CSR
Manufacture
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- legal entity composition - Synthetic amorphous silicon dioxide, nanostructured material, silanized
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- legal entity composition - Synthetic amorphous silicon dioxide, nanostructured material, silanized
- Type of information reported:
- set of nanoforms
- Reason / purpose:
- justification for reporting set of similar nanoforms
- Shape category:
- spheroidal
- Shape:
- other: open cellular network
- Pure shape:
- yes
- Range:
- > 99 - <= 100 %
- Shape category:
- spheroidal
- Percentile:
- D90
- Range:
- >= 2 - <= 2.5 nm
- Percentile:
- D50
- Range:
- >= 1.5 - < 1.75 nm
- Percentile:
- D10
- Range:
- >= 1 - <= 1.5 nm
- Additional information:
- The reported D50, D10 and D90 values in the low nano-size range refer to morphology as determined by TEM (ASTM D3849) and USAXS. However, particles of this size range do not exist in isolation in silica gel/aerogel. Cabot Aerogel GmbH's aerogel products are manufactured and placed on the market as large (>100 nm) open cellular networks of silica gel.
- Fraction of constituent particles in the size range 1-100 nm:
- >= 50 - < 100 %
- Structure:
- amorphous
- Pure structure:
- yes
- Typical composition:
- > 99.7 %
- Range of specific surface area:
- >= 630 - <= 760 m²/g
- Surface treatment applied:
- yes
- Does the set contain both treated and non-surface treated nanoforms?:
- no
- Name of activity / technique:
- Manufacture of the substance
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
- Name of activity / technique:
- Closed continous process with occasional controlled exposure
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Processes with opportunity for exposure
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Transfer at dedicated facility
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Transfer into small containers, including weighing
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Related assessment:
- use assessed in a joint CSR
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Related assessment:
- use assessed in a joint CSR
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Related assessment:
- use assessed in a joint CSR
Manufacture
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Manufacture of Silica
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Name of activity / technique:
- Manufacture of Silica
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Related assessment:
- use assessed in a joint CSR
Manufacture
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Synthetic amorphous silicon dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- Synthetic amorphous silicon dioxide
- Range of length:
- >= 25 - <= 30 nm
- Range of lateral dimension 1:
- >= 25 - <= 30 nm
- Range of lateral dimension 2:
- >= 25 - <= 30 nm
- Surface treatment applied:
- no
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 15: Use as laboratory reagent
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Manufacture
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Amorphous Silicon Dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Related composition:
- synthetic amorphous silica, nanostructured material_Set 1
- Reference substance:
- Amorphous Silicon Dioxide
- Type of information reported:
- set of nanoforms
- Name of set of nanoforms:
- Synthetic amorphous silicon dioxide - Set 1
- Shape category:
- spheroidal
- Shape:
- other: Spheroidal
- Pure shape:
- yes
- Shape category:
- spheroidal
- Percentile:
- D10
- Range:
- >= 6 - <= 69 nm
- Percentile:
- D50
- Range:
- >= 8 - <= 92 nm
- Percentile:
- D90
- Range:
- >= 12 - <= 134 nm
- Fraction of constituent particles in the size range 1-100 nm:
- > 95 - <= 100 %
- Structure:
- amorphous
- Pure structure:
- yes
- Range of specific surface area:
- >= 26 - <= 906 m²/g
- Surface treatment applied:
- no
- Name:
- Amorphous Silicon Dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Related composition:
- synthetic amorphous silica, nanostructured material_Set 1
- Reference substance:
- Amorphous Silicon Dioxide
- Type of information reported:
- set of nanoforms
- Name of set of nanoforms:
- Synthetic amorphous silicon dioxide - Set 1
- Shape category:
- spheroidal
- Shape:
- other: Spheroidal
- Pure shape:
- yes
- Shape category:
- spheroidal
- Percentile:
- D10
- Range:
- >= 5 - <= 51 nm
- Percentile:
- D50
- Range:
- >= 7 - <= 69 nm
- Percentile:
- D90
- Range:
- >= 12 - <= 103 nm
- Fraction of constituent particles in the size range 1-100 nm:
- > 95 - <= 100 %
- Structure:
- amorphous
- Pure structure:
- yes
- Range of specific surface area:
- >= 79 - <= 906 m²/g
- Surface treatment applied:
- no
- Name of activity / technique:
- Manufacture of the substance (wet route)
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
- Name of activity / technique:
- Manufacture of the substance (wet route)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Related assessment:
- use assessed in a joint CSR
Referenceopen allclose all
Contributing activity / technique for the environment
Contributing activity / technique for workers
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Related assessment:
- use assessed in a joint CSR
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
Manufacture
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Related assessment:
- use assessed in a joint CSR
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Related assessment:
- use assessed in a joint CSR
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Related assessment:
- use assessed in a joint CSR
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Related assessment:
- use assessed in a joint CSR
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Related assessment:
- use assessed in a joint CSR
Manufacture
Contributing activity / technique for the environment
- Name of activity / technique:
- manufacture
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Name of activity / technique:
- manufacture
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
Manufacture
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Silicon dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- Silicon dioxide
- Type of information reported:
- single nanoform
- Name of nanoform:
- Speroidal
- Shape category:
- spheroidal
- Remarks:
- ND and Z1, primary particle shape: 100% spherical particles with regular shape.
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Shape category:
- spheroidal
- Remarks:
- ND and Z1
- Percentile:
- D10
- Typical value:
- >= 1.2 nm
- Range:
- >= 0.5 - <= 10 nm
- Percentile:
- D50
- Typical value:
- >= 2.9 nm
- Range:
- >= 2 - <= 14 nm
- Percentile:
- D90
- Typical value:
- >= 11 nm
- Range:
- >= 5 - <= 40 nm
- Additional information:
- According to the TEM image and histogram, ND type Quartzene material’s particle dize varies between 1 to 20 nm where as the majority of the particles are below 10 nm in size.
As it can be seen from the TEM analysis, Z1 type Quartzene material’s particle size varies between 5 to 20 nm in the image and it should be mentioned that the analytical sample is an example of the Z1 particles on the TEM grid, different parts of the same gird may have different particles and the particle size can vary between 10 to 30 nm in size. - Fraction of constituent particles in the size range 1-100 nm:
- >= 50 - <= 100 %
- Structure:
- amorphous
- Name:
- amorphous
- Pure structure:
- yes
- Typical composition:
- >= 99.7 %
- Range:
- >= 99.7 - <= 100 %
- Crystal system:
- not applicable
- Description:
- Z1 and ND is 100% amorphous (< 0,3 % crystalline parts). X-ray diffraction diagrams of ND/Z1 show only a broad halo, revealing an X-ray amorphous structure. The detection limit for crystallinity by X-ray is in the maximum order of 0.3% by weight or below. please see XRD-analysis for confirmation.
- Typical specific surface area:
- >= 279 m²/g
- Range of specific surface area:
- >= 122 - <= 556 m²/g
- Surface treatment applied:
- no
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Manufacture
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Silica gel and precipitated silica crystalline free
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- Silica gel and precipitated silica crystalline free
- Type of information reported:
- single nanoform
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 94.41 %
- Range:
- ca. 85 - <= 100 %
- Shape category:
- spheroidal
- Percentile:
- D95
- Typical value:
- ca. 6.84 nm
- Range:
- >= 6.84 - <= 87.7 nm
- Percentile:
- D90
- Typical value:
- ca. 6.01 nm
- Range:
- >= 6.01 - <= 80.6 nm
- Percentile:
- D50
- Typical value:
- ca. 3.69 nm
- Range:
- >= 3.69 - <= 61.8 nm
- Percentile:
- D10
- Typical value:
- ca. 2.48 nm
- Range:
- >= 3.19 - <= 49.3 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 90 - <= 100 %
- Structure:
- crystalline
- Name:
- Silicon dioxide
- Pure structure:
- yes
- Typical composition:
- <= 0.3 %
- Range:
- > 0 - < 0.3 %
- Crystal system:
- other:
- Typical specific surface area:
- ca. 788 m²/g
- Range of specific surface area:
- >= 29.8 - <= 846.5 m²/g
- Surface treatment applied:
- no
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 15: Use as laboratory reagent
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Related assessment:
- use assessed in a joint CSR
Manufacture
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Legal entitiy - Synthetic amorphous silicon sioxide, nanostructured material
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- Legal entitiy - Synthetic amorphous silicon sioxide, nanostructured material
- Type of information reported:
- set of nanoforms
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Range:
- > 99 - <= 100 %
- Shape category:
- spheroidal
- Percentile:
- D90
- Range:
- >= 12.7 - <= 31 nm
- Percentile:
- D50
- Typical value:
- ca. 9 nm
- Range:
- >= 3 - <= 29 nm
- Percentile:
- D10
- Range:
- >= 7.4 - <= 11 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 50 - <= 100 %
- Structure:
- amorphous
- Pure structure:
- yes
- Range:
- >= 99.7 - <= 100 %
- Range of specific surface area:
- >= 50 - <= 430 m²/g
- Surface treatment applied:
- no
- Does the set contain both treated and non-surface treated nanoforms?:
- no
- Name of activity / technique:
- manufacture of the substance
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
- Name of activity / technique:
- manufacture of the substance in closed process without likelihood of exposure
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- manufacture of the substance in closed continuous process with occational controlled exposue
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- manufacture of the substance where opportunity for exposure arises
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- transfer of the substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- transfer of the substance or mixture into small containers (dedicated filling line, including weighing
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Related assessment:
- use assessed in a joint CSR
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
Manufacture
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Amorphous Silicon Dioxide - organic treatment (silanized)
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Related composition:
- synthetic amorphous silicon dioxide, nanostructured material, silanized_Set 2
- Reference substance:
- Amorphous Silicon Dioxide - organic treatment (silanized)
- Type of information reported:
- set of nanoforms
- Name of set of nanoforms:
- Synthetic amorphous silicon dioxide - Set 2
- Shape category:
- spheroidal
- Shape:
- other: spheroidal
- Pure shape:
- yes
- Shape category:
- spheroidal
- Percentile:
- D10
- Range:
- >= 7 - <= 47 nm
- Percentile:
- D50
- Range:
- >= 9 - <= 63 nm
- Percentile:
- D90
- Range:
- >= 13 - <= 100 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 99.9 - <= 100 %
- Structure:
- amorphous
- Pure structure:
- yes
- Range of specific surface area:
- >= 40 - <= 523 m²/g
- Surface treatment applied:
- yes
- Does the set contain both treated and non-surface treated nanoforms?:
- no
- Surface treatment name:
- silane derivatization
- Order:
- #1
- Surface treatment agent:
- Amorphous Silicon Dioxide - organic treatment (silanized)
- Order:
- #2
- Surface treatment agent:
- Amorphous Silicon Dioxide - organic treatment (silanized)
- External layer:
- hydrophilic
- Description:
- The silica nanoparticles are silane derivatized by covalent bonding (a condensation reaction) of the hydrolysed organosilanes to the silanols on the surface of the particles. This is done at high temperature (50-90C) and at high pH (9-11), making all the glycidoxypropyl silanes open up to diols (the functionality introduced on the surface of the Levasil CC products). For the Levasil CC 141, CC301 and CC401 products, the glycidoxypropyl silane is the only silane. For the Levasil CC503, a 50/50 molar ratio of glycidoxypropyl and propyl silane is used. No purification of the products is made.
- Percentage of coverage of particle surface, %:
- >= 55 - <= 90
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Related assessment:
- use assessed in a joint CSR
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Manufacture
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Related assessment:
- use assessed in a joint CSR
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Related assessment:
- use assessed in a joint CSR
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Related assessment:
- use assessed in a joint CSR
Manufacture
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Related assessment:
- use assessed in a joint CSR
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Related assessment:
- use assessed in a joint CSR
Manufacture
- Name:
- synthetic amorphous silica, nanostructured material
- Type of composition:
- boundary composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- synthetic amorphous silica, nanostructured material
- Type of information reported:
- set of nanoforms
- Name of set of nanoforms:
- synthetic amorphous silica, nanostructured material
- Reason / purpose:
- justification for reporting set of similar nanoforms
- Shape category:
- spheroidal
- Shape:
- other: 3-dimensional branched fractal aggregates
- Pure shape:
- yes
- Range:
- >= 99 - <= 100 %
- Shape category:
- spheroidal
- Percentile:
- D10
- Range:
- >= 1 - <= 100 nm
- Percentile:
- D50
- Range:
- >= 1 - <= 100 nm
- Percentile:
- D90
- Range:
- >= 1 - <= 100 nm
- Range of length:
- >= 1 - <= 100 nm
- Range of lateral dimension 1:
- >= 1 - <= 100 nm
- Range of lateral dimension 2:
- >= 1 - <= 100 nm
- Range of aspect ratio (:1):
- >= 1 - <= 1
- Additional information:
- The particle forming mechanism for each manufacturing process starts with the formation of liquid nuclei that grow to constituent particles that coagulate to aggregates and solidify. Constituent particles are therefore spherical in nature while aggregates (and agglomerates) show a high fractal structure.
- Fraction of constituent particles in the size range 1-100 nm:
- > 50 - <= 100 %
- Structure:
- amorphous
- Name:
- amorphous
- Pure structure:
- yes
- Range:
- > 99.7 - <= 100 %
- Description:
- X-ray diffraction diagrams of SAS, show only a broad halo, revealing an X-ray amorphous structure. The detection limit for crystallinity by X-ray is in the maximum order of 0.3% by weight or below.
- Range of specific surface area:
- >= 4 - <= 1 000 m²/g
- Range of volume specific surface area:
- >= 8.8 - <= 2 200 m²/cm³
- Skeletal density:
- >= 1.7 - <= 2.25 g/cm³
- Surface treatment applied:
- no
- Name:
- CAS-Name: Silica gel, precipitated [CAS-No. 112926-00-8]
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Related composition:
- synthetic amorphous silica, nanostructured material
- Reference substance:
- CAS-Name: Silica gel, precipitated [CAS-No. 112926-00-8]
- Type of information reported:
- set of nanoforms
- Name of set of nanoforms:
- synthetic amorphous silica, nanostructured material
- Reason / purpose:
- justification for reporting set of similar nanoforms
- Shape category:
- spheroidal
- Shape:
- other: 3-dimensional branched fractal aggregates
- Pure shape:
- yes
- Range:
- >= 99 - <= 100 %
- Shape category:
- spheroidal
- Percentile:
- D10
- Range:
- >= 1 - <= 100 nm
- Percentile:
- D50
- Range:
- >= 1 - <= 100 nm
- Percentile:
- D90
- Range:
- >= 1 - <= 100 nm
- Range of length:
- >= 1 - <= 100 nm
- Range of lateral dimension 1:
- >= 1 - <= 100 nm
- Range of lateral dimension 2:
- >= 1 - <= 100 nm
- Range of aspect ratio (:1):
- >= 1 - <= 1
- Additional information:
- The particle forming mechanism for each manufacturing process starts with the formation of liquid nuclei that grow to constituent particles that coagulate to aggregates and solidify. Constituent particles are therefore spherical in nature while aggregates (and agglomerates) show a high fractal structure.
- Fraction of constituent particles in the size range 1-100 nm:
- > 50 - <= 100 %
- Structure:
- amorphous
- Name:
- amorphous
- Pure structure:
- yes
- Range:
- > 99.7 - <= 100 %
- Description:
- X-ray diffraction diagrams of SAS, show only a broad halo, revealing an X-ray amorphous structure. The detection limit for crystallinity by X-ray is in the maximum order of 0.3% by weight or below.
- Range of specific surface area:
- >= 4 - <= 800 m²/g
- Range of volume specific surface area:
- >= 8.8 - <= 2 200 m²/cm³
- Skeletal density:
- >= 1.7 - <= 2.25 g/cm³
- Surface treatment applied:
- no
- Surface treatment name:
- hydrophilic
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Referenceopen allclose all
Contributing activity / technique for the environment
Contributing activity / technique for workers
Manufacture
- Name:
- Synthetic amorphous silica, precipitated
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- Synthetic amorphous silica, precipitated
- Type of information reported:
- single nanoform
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- <= 100 %
- Shape category:
- spheroidal
- Percentile:
- D10
- Typical value:
- ca. 13.7 nm
- Range:
- > 7 - < 20 nm
- Percentile:
- D50
- Typical value:
- ca. 20 nm
- Range:
- > 13 - < 27 nm
- Percentile:
- D90
- Typical value:
- ca. 31.6 nm
- Range:
- > 25 - < 38 nm
- Typical aspect ratio (:1):
- 1.3 :1
- Fraction of constituent particles in the size range 1-100 nm:
- >= 99 - <= 100 %
- Structure:
- amorphous
- Pure structure:
- yes
- Typical specific surface area:
- ca. 148 m²/g
- Range of specific surface area:
- > 100 - < 200 m²/g
- Surface treatment applied:
- no
- Does the set contain both treated and non-surface treated nanoforms?:
- no
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
Manufacture
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Related assessment:
- use assessed in a joint CSR
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 15: Use as laboratory reagent
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 26: Handling of solid inorganic substances at ambient temperature
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Related assessment:
- use assessed in a joint CSR
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
Manufacture
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Manufacture of synthetic amorphous silicon dioxide
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Name of activity / technique:
- Manufacture of synthetic amorphous silicon dioxide
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 26: Handling of solid inorganic substances at ambient temperature
Manufacture
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- synthetic amorphous silica, nanostructured material
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Related composition:
- synthetic amorphous silica, nanomaterial
- Reference substance:
- synthetic amorphous silica, nanostructured material
- Type of information reported:
- set of nanoforms
- Name of set of nanoforms:
- synthetic amorphous silicon dioxide (SAS), nanostructured material
- Shape category:
- spheroidal
- Shape:
- other: 3-dimensional branched fractal aggregates
- Pure shape:
- yes
- Range:
- >= 99 - <= 100 %
- Shape category:
- spheroidal
- Percentile:
- D10
- Range:
- >= 1 - <= 100 nm
- Percentile:
- D50
- Range:
- >= 1 - <= 100 nm
- Percentile:
- D90
- Range:
- >= 1 - <= 100 nm
- Additional information:
- The particle forming mechanism for each manufacturing process starts with the formation of liquid nuclei that grow to constituent particles that coagulate to aggregates and solidify. Constituent particles are therefore spherical in nature while aggregates (and agglomerates) show a high fractal structure.
- Fraction of constituent particles in the size range 1-100 nm:
- 100 - 100 %
- Structure:
- amorphous
- Name:
- amorphous
- Pure structure:
- yes
- Range:
- > 99.7 - <= 100 %
- Description:
- X-ray diffraction diagrams of SAS, show only a broad halo, revealing an X-ray amorphous structure. The limit of quantifcation is 0.3 % corresponding to a limit of detection of 0.1 % quartz. The maximum quartz content is less than 0.1%.
- Range of specific surface area:
- >= 10 - <= 1 000 m²/g
- Range of volume specific surface area:
- >= 6.8 - <= 2 250 m²/cm³
- Skeletal density:
- >= 1.7 - <= 2.25 g/cm³
- Surface treatment applied:
- no
- Name of activity / technique:
- manufacture of the substance
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
- Name of activity / technique:
- Manufacturing
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Related assessment:
- use assessed in a joint CSR
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Manufacture
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- synthetic amorphous silicon dioxide, nanostructured material, ST
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Related composition:
- synthetic amorphous silicon dioxide, nanostructured material, silanized
- Reference substance:
- synthetic amorphous silicon dioxide, nanostructured material, ST
- Type of information reported:
- set of nanoforms
- Name of set of nanoforms:
- synthetic amorphous silica, nanostructured material, ST
- Reason / purpose:
- justification for reporting set of similar nanoforms
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Range:
- > 99 - <= 100 %
- Shape category:
- spheroidal
- Percentile:
- D90
- Range:
- >= 8 - <= 90 nm
- Percentile:
- D50
- Range:
- >= 5 - <= 50 nm
- Percentile:
- D10
- Range:
- >= 2 - <= 30 nm
- Fraction of constituent particles in the size range 1-100 nm:
- > 99 - <= 100 %
- Structure:
- amorphous
- Name:
- SAS, nanostructured material, ST
- Pure structure:
- yes
- Range:
- >= 99.9 - <= 100 %
- Description:
- X-ray diffraction diagrams of SAS, show only a broad halo, revealing an X-ray amorphous structure. T
he detection limit for crystallinity by X-ray is below the maximum order of 0.3% by weight. - Range of specific surface area:
- >= 80 - <= 800 m²/g
- Range of volume specific surface area:
- >= 200 - <= 1 500 m²/cm³
- Skeletal density:
- ca. 2.24 g/cm³
- Surface treatment applied:
- yes
- Does the set contain both treated and non-surface treated nanoforms?:
- no
- Surface treatment name:
- SAS, nanostructured material, ST
sythetically-spherical-other/phenyl 1 - Order:
- #2
- Surface treatment agent:
- synthetic amorphous silicon dioxide, nanostructured material, ST
- Order:
- #1
- Surface treatment agent:
- synthetic amorphous silicon dioxide, nanostructured material, ST
- External layer:
- hydrophobic
- Description:
- DESCRIBE THE PROCESS BEHIND THE SURFACE FUNCTIONALISATION / TREATMENT:
- Main features of the surface treatment/functionalisation process: product becomes hydrophilic
- the type of process/reaction (hydrolysis, oxygen treatment, acid washing, etc.): Hydrolysis
- any purification step: no
- Functionalities introduced by the treatment (e.g. carboxyl, amino, hydroxyl groups: Phenyl - Percentage of coverage of particle surface, %:
- >= 90 - <= 100
- Surface treatment name:
- SAS, nanostructured material, ST
sythetically-spherical-methacryl 1 - Order:
- #1
- Surface treatment agent:
- synthetic amorphous silicon dioxide, nanostructured material, ST
- External layer:
- hydrophilic
- Description:
- DESCRIBE THE PROCESS BEHIND THE SURFACE FUNCTIONALISATION / TREATMENT:
- Main features of the surface treatment/functionalisation process: product becomes hydrophilic
- the type of process/reaction (hydrolysis, oxygen treatment, acid washing, etc.): Hydrolysis
- any purification step: no
- Functionalities introduced by the treatment (e.g. carboxyl, amino, hydroxyl groups): Methacryl - Percentage of coverage of particle surface, %:
- >= 90 - <= 100
- Surface treatment name:
- SAS, nanostructured material, ST
sythetically-spherical-amino 1 - Order:
- #1
- Surface treatment agent:
- synthetic amorphous silicon dioxide, nanostructured material, ST
- External layer:
- hydrophilic
- Description:
- DESCRIBE THE PROCESS BEHIND THE SURFACE FUNCTIONALISATION / TREATMENT:
- Main features of the surface treatment/functionalisation process: product becomes hydrophilic
- the type of process/reaction (hydrolysis, oxygen treatment, acid washing, etc.): Hydrolysis
- any purification step: no
- Functionalities introduced by the treatment (e.g. carboxyl, amino, hydroxyl groups): Amino - Percentage of coverage of particle surface, %:
- >= 90 - <= 100
- Surface treatment name:
- SAS, nanostructured material, ST
sythetically-spherical-alkyl 1 - Order:
- #1
- Surface treatment agent:
- synthetic amorphous silicon dioxide, nanostructured material, ST
- External layer:
- hydrophobic
- Description:
- DESCRIBE THE PROCESS BEHIND THE SURFACE FUNCTIONALISATION / TREATMENT:
- Main features of the surface treatment/functionalisation process: product becomes hydrophobic
- the type of process/reaction (hydrolysis, oxygen treatment, acid washing, etc.): Hydrolysis
- any purification step: no
- Functionalities introduced by the treatment (e.g. carboxyl, amino, hydroxyl groups): Alkyl - Percentage of coverage of particle surface, %:
- >= 90 - <= 100
- Surface treatment name:
- SAS, nanostructured material, ST
waterglass-spherical-alkyl 1b - Order:
- #1
- Surface treatment agent:
- synthetic amorphous silicon dioxide, nanostructured material, ST
- External layer:
- hydrophobic
- Description:
- DESCRIBE THE PROCESS BEHIND THE SURFACE FUNCTIONALISATION / TREATMENT:
- Main features of the surface treatment/functionalisation process: product becomes hydrophobic
- the type of process/reaction (hydrolysis, oxygen treatment, acid washing, etc.): Hydrolysis
- any purification step: no
- Functionalities introduced by the treatment (e.g. carboxyl, amino, hydroxyl groups): Alkyl - Percentage of coverage of particle surface, %:
- >= 90 - <= 100
- Surface treatment name:
- SAS, nanostructured material, ST
waterglass-spherical-alkyl 1a - Order:
- #1
- Surface treatment agent:
- synthetic amorphous silicon dioxide, nanostructured material, ST
- External layer:
- hydrophobic
- Description:
- DESCRIBE THE PROCESS BEHIND THE SURFACE FUNCTIONALISATION / TREATMENT:
- Main features of the surface treatment/functionalisation process: product becomes hydrophobic
- the type of process/reaction (hydrolysis, oxygen treatment, acid washing, etc.): Hydrolysis
- any purification step: no
- Functionalities introduced by the treatment (e.g. carboxyl, amino, hydroxyl groups): Alkyl - Percentage of coverage of particle surface, %:
- >= 90 - <= 100
- Surface treatment name:
- SAS, nanostructured material, ST
waterglass-irregular-amino 1 - Order:
- #1
- Surface treatment agent:
- synthetic amorphous silicon dioxide, nanostructured material, ST
- External layer:
- hydrophilic
- Description:
- DESCRIBE THE PROCESS BEHIND THE SURFACE FUNCTIONALISATION / TREATMENT:
- Main features of the surface treatment/functionalisation process: product becomes hydrophilic
- the type of process/reaction (hydrolysis, oxygen treatment, acid washing, etc.): Hydrolysis
- any purification step: no
- Functionalities introduced by the treatment (e.g. carboxyl, amino, hydroxyl groups): Amino - Percentage of coverage of particle surface, %:
- >= 90 - <= 100
- Surface treatment name:
- SAS, nanostructured material, ST
waterglass-irregular-alkyl 1b - Order:
- #1
- Surface treatment agent:
- synthetic amorphous silicon dioxide, nanostructured material, ST
- External layer:
- hydrophobic
- Description:
- DESCRIBE THE PROCESS BEHIND THE SURFACE FUNCTIONALISATION / TREATMENT:
- Main features of the surface treatment/functionalisation process: product becomes hydrophobic
- the type of process/reaction (hydrolysis, oxygen treatment, acid washing, etc.): Hydrolysis
- any purification step: no
- Functionalities introduced by the treatment (e.g. carboxyl, amino, hydroxyl groups): Alkyl - Percentage of coverage of particle surface, %:
- >= 90 - <= 100
- Surface treatment name:
- SAS, nanostructured material, ST
waterglass-irregular-alkyl 1a - Order:
- #1
- Surface treatment agent:
- synthetic amorphous silicon dioxide, nanostructured material, ST
- External layer:
- hydrophobic
- Description:
- DESCRIBE THE PROCESS BEHIND THE SURFACE FUNCTIONALISATION / TREATMENT:
- Main features of the surface treatment/functionalisation process: product becomes hydrophobic
- the type of process/reaction (hydrolysis, oxygen treatment, acid washing, etc.): Hydrolysis
- any purification step: no
- Functionalities introduced by the treatment (e.g. carboxyl, amino, hydroxyl groups): Alkyl - Percentage of coverage of particle surface, %:
- >= 90 - <= 100
- Name:
- synthetic amorphous silicon dioxide, nanostructured material
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Related composition:
- synthetic amorphous silica, nanostructured material
- Reference substance:
- synthetic amorphous silicon dioxide, nanostructured material
- Type of information reported:
- set of nanoforms
- Name of set of nanoforms:
- synthetic amorphous silica, nanostructured material
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Range:
- > 99 - <= 100 %
- Shape category:
- spheroidal
- Percentile:
- D90
- Range:
- >= 8 - <= 90 nm
- Percentile:
- D50
- Range:
- >= 5 - <= 50 nm
- Percentile:
- D10
- Range:
- >= 2 - <= 30 nm
- Fraction of constituent particles in the size range 1-100 nm:
- > 99 - <= 100 %
- Structure:
- amorphous
- Name:
- SAS, nanostructured material
- Pure structure:
- yes
- Range:
- >= 99.9 - <= 100 %
- Description:
- X-ray diffraction diagrams of SAS, show only a broad halo, revealing an X-ray amorphous structure. T
he detection limit for crystallinity by X-ray is below the maximum order of 0.3% by weight. - Range of specific surface area:
- >= 80 - <= 800 m²/g
- Range of volume specific surface area:
- >= 200 - <= 1 500 m²/cm³
- Skeletal density:
- ca. 2.24 g/cm³
- Surface treatment applied:
- no
- Does the set contain both treated and non-surface treated nanoforms?:
- no
- Name:
- synthetic amorphous silicon dioxide, nanostructured colloidal material
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Related composition:
- synthetic amorphous silica, nanostructured material
- Reference substance:
- synthetic amorphous silicon dioxide, nanostructured colloidal material
- Type of information reported:
- set of nanoforms
- Name of set of nanoforms:
- synthetic amorphous silica, nanostructured colloidal material
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Range:
- > 99 - <= 100 %
- Shape category:
- spheroidal
- Percentile:
- D90
- Range:
- >= 10 - <= 90 nm
- Percentile:
- D50
- Range:
- >= 8 - <= 60 nm
- Percentile:
- D10
- Range:
- >= 5 - <= 40 nm
- Fraction of constituent particles in the size range 1-100 nm:
- > 99 - <= 100 %
- Structure:
- amorphous
- Name:
- Colloidal silica
- Pure structure:
- yes
- Range:
- >= 99.9 - <= 100 %
- Description:
- X-ray diffraction diagrams of SAS, show only a broad halo, revealing an X-ray amorphous structure. T
he detection limit for crystallinity by X-ray is below the maximum order of 0.3% by weight. - Range of specific surface area:
- >= 30 - <= 200 m²/g
- Range of volume specific surface area:
- >= 80 - <= 600 m²/cm³
- Skeletal density:
- ca. 2.48 g/cm³
- Surface treatment applied:
- no
- Does the set contain both treated and non-surface treated nanoforms?:
- no
- Name:
- synthetic amorphous silicon dioxide, nanostructured material, ST
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Related composition:
- synthetic amorphous silicon dioxide, nanostructured material, silanized
- Reference substance:
- synthetic amorphous silicon dioxide, nanostructured material, ST
- Type of information reported:
- set of nanoforms
- Name of set of nanoforms:
- synthetic amorphous silica, nanostructured colloidal material, ST
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Range:
- > 99 - <= 100 %
- Shape category:
- spheroidal
- Percentile:
- D90
- Range:
- >= 10 - <= 90 nm
- Percentile:
- D50
- Range:
- >= 8 - <= 60 nm
- Percentile:
- D10
- Range:
- >= 5 - <= 40 nm
- Fraction of constituent particles in the size range 1-100 nm:
- > 99 - <= 100 %
- Structure:
- amorphous
- Name:
- Colloidal silica
- Pure structure:
- yes
- Range:
- >= 99.9 - <= 100 %
- Description:
- X-ray diffraction diagrams of SAS, show only a broad halo, revealing an X-ray amorphous structure. T
he detection limit for crystallinity by X-ray is below the maximum order of 0.3% by weight. - Range of specific surface area:
- >= 30 - <= 200 m²/g
- Range of volume specific surface area:
- >= 80 - <= 600 m²/cm³
- Skeletal density:
- ca. 2.48 g/cm³
- Surface treatment applied:
- yes
- Does the set contain both treated and non-surface treated nanoforms?:
- no
- Surface treatment name:
- Klebosol, ST Alox
- Order:
- #1
- Surface treatment agent:
- synthetic amorphous silicon dioxide, nanostructured material, ST
- External layer:
- hydrophobic
- Description:
- DESCRIBE THE PROCESS BEHIND THE SURFACE FUNCTIONALISATION / TREATMENT:
- Main features of the surface treatment/functionalisation process: product becomes cationic
- the type of process/reaction (hydrolysis, oxygen treatment, acid washing, etc.): Hydrolysis
- any purification step: no
- Functionalities introduced by the treatment (e.g. carboxyl, amino, hydroxyl groups): Al2O3 - Percentage of coverage of particle surface, %:
- > 90 - < 100
- Name of activity / technique:
- Manufacture of the substance
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
- Name of activity / technique:
- Manufacture of the substance
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 15: Use as laboratory reagent
Referenceopen allclose all
Contributing activity / technique for the environment
Contributing activity / technique for workers
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Related assessment:
- use assessed in a joint CSR
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Related assessment:
- use assessed in a joint CSR
Manufacture
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Legal entitiy - Synthetic amorphous silicon dioxide, nanostructured material, silanized
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- Legal entitiy - Synthetic amorphous silicon dioxide, nanostructured material, silanized
- Type of information reported:
- set of nanoforms
- Reason / purpose:
- justification for reporting set of similar nanoforms
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Range:
- > 99 - <= 100 %
- Shape category:
- spheroidal
- Percentile:
- D90
- Typical value:
- ca. 14 nm
- Range:
- ca. 14 - ca. 14 nm
- Percentile:
- D50
- Typical value:
- ca. 12 nm
- Range:
- >= 9 - ca. 15 nm
- Percentile:
- D10
- Typical value:
- ca. 9 nm
- Range:
- ca. 9 - ca. 9 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 50 - <= 100 %
- Structure:
- amorphous
- Pure structure:
- yes
- Range:
- >= 99.7 - <= 100 %
- Range of specific surface area:
- >= 105 - <= 135 m²/g
- Surface treatment applied:
- yes
- Does the set contain both treated and non-surface treated nanoforms?:
- no
- Name:
- Legal entitiy - Synthetic amorphous silicon sioxide, nanostructured material
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- Legal entitiy - Synthetic amorphous silicon sioxide, nanostructured material
- Type of information reported:
- set of nanoforms
- Reason / purpose:
- justification for reporting set of similar nanoforms
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Range:
- > 99 - <= 100 %
- Shape category:
- spheroidal
- Percentile:
- D90
- Range:
- >= 12.7 - <= 31 nm
- Percentile:
- D50
- Typical value:
- ca. 9 nm
- Range:
- >= 3 - <= 29 nm
- Percentile:
- D10
- Range:
- >= 7.4 - <= 11 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 50 - <= 100 %
- Structure:
- amorphous
- Pure structure:
- yes
- Range:
- >= 99.7 - <= 100 %
- Range of specific surface area:
- >= 50 - <= 450 m²/g
- Surface treatment applied:
- no
- Does the set contain both treated and non-surface treated nanoforms?:
- no
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Referenceopen allclose all
Contributing activity / technique for the environment
Contributing activity / technique for workers
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Related assessment:
- use assessed in a joint CSR
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Related assessment:
- use assessed in a joint CSR
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Related assessment:
- use assessed in a joint CSR
Manufacture
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- synthetic amorphous silica, nanostructured material_7631-86-9
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- synthetic amorphous silica, nanostructured material_7631-86-9
- Type of information reported:
- single nanoform
- Shape category:
- spheroidal
- Shape:
- other: 3-dimensional branched fractal aggregates
- Pure shape:
- yes
- Typical composition:
- ca. 99.7 %
- Range:
- >= 99 - <= 100 %
- Shape category:
- spheroidal
- Percentile:
- D10
- Typical value:
- ca. 15 nm
- Range:
- >= 0 - <= 20 nm
- Percentile:
- D50
- Typical value:
- ca. 23 nm
- Range:
- >= 0 - <= 60 nm
- Percentile:
- D90
- Typical value:
- ca. 46 nm
- Range:
- >= 30 - <= 60 nm
- Typical length:
- ca. 23 nm
- Range of length:
- >= 1 - <= 100 nm
- Typical lateral dimension 1:
- ca. 23 nm
- Range of lateral dimension 1:
- >= 1 - <= 100 nm
- Typical lateral dimension 2:
- ca. 23 nm
- Range of lateral dimension 2:
- >= 1 - <= 100 nm
- Typical aspect ratio (:1):
- ca. 1 :1
- Range of aspect ratio (:1):
- >= 1 - <= 1
- Additional information:
- The particle forming mechanism for each manufacturing process starts with the formation of liquid nuclei that grow to constituent particles that coagulate to aggregates and solidify. Constituent particles are therefore spherical in nature while aggregates (and agglomerates) show a high fractal structure.
As shape is spheroidal, Typical lateral dimension 1, Typical lateral dimension 2 are equal to Typical Length . Typical Length is d50 value.
As shape is spheroidal, Typical aspect ration is 1 (the substance is not in fiber form).
Please see report 2020.075 - SID 17211. (ex batch number I044458101) - Fraction of constituent particles in the size range 1-100 nm:
- > 50 - <= 100 %
- Structure:
- amorphous
- Name:
- amorphous
- Pure structure:
- yes
- Typical composition:
- > 99.7 %
- Range:
- > 99.7 - <= 100 %
- Description:
- X-ray diffraction diagrams of SAS, show only a broad halo, revealing an X-ray amorphous structure. The detection limit for crystallinity by X-ray is in the maximum order of 0.3% by weight or below.
For concerned substance, please see reports HSL report_June 2018 / Laboratory number 1801858 LEVILITE Precipitated amorphous silica p3, 2020.075 - SID 17211 and ECETOC2006_2-3-1_xray. - Typical specific surface area:
- ca. 528 m²/g
- Range of specific surface area:
- >= 200 - <= 700 m²/g
- Typical volume specific surface area:
- ca. 1 104 m²/cm³
- Range of volume specific surface area:
- >= 400 - <= 1 500 m²/cm³
- Skeletal density:
- >= 1.7 - <= 2.25 g/cm³
- Surface treatment applied:
- no
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Related assessment:
- use assessed in a joint CSR
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Related assessment:
- use assessed in a joint CSR
Manufacture
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Related assessment:
- use assessed in a joint CSR
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.