Registration Dossier

Administrative data

First-aid measures

General: Get medical attention if symptoms occur.

1 Description of first aid measures
Inhalation: Move to fresh air.
Eye contact: Rinse immediately with plenty of water.
Skin Contact: Remove contaminated clothing and wash the skin thoroughly with soap and water after work.
Ingestion: Rinse mouth thoroughly.
Personal Protection for First-aid Responders: CAUTION! First aid personnel must be aware of own risk during rescue!. See section on Exposure controls/personal protection

2 Most important symptoms and effects, both acute and delayed:
No data available.

3 Indication of any immediate medical attention and special treatment needed
Hazards: No data available.
Treatment: Treat symptomatically.

Fire-fighting measures

General Fire Hazards: No unusual fire or explosion hazards noted.

1 Extinguishing media
Suitable extinguishing media: Extinguish with foam, carbon dioxide, dry powder or water fog.
Unsuitable extinguishing media: Do not use water jet as an extinguisher, as this will spread the fire.

2 Special hazards arising from the substance or mixture:
During fire, gases hazardous to health may be formed.

3 Advice for firefighters
Special fire fighting procedures: No data available.
Special protective equipment for fire-fighters: Self-contained breathing apparatus and full protective clothing must be worn in case of fire.

Accidental release measures

1 Personal precautions, protective equipment and emergency procedures:
Use personal protective equipment. Put on protective equipment before entering danger area.
For non-emergency personnel: Use personal protective equipment.
For emergency responders: Warn everybody of potential hazards and evacuate if necessary. Use personal protective equipment.
2 Environmental Precautions: Avoid release to the environment. Prevent further leakage or spillage if safe to do so. Do not contaminate water sources or sewer. Environmental manager must be informed of all major spillages.

3 Methods and material for containment and cleaning up: Remove the dust with an suck up-system. Avoid swirling.


Handling and storage

1 Precautions for safe handling: Provide adequate ventilation. Wear appropriate personal protective equipment. Observe good industrial hygiene practices. Avoid dust formation.

2 Conditions for safe storage, including any incompatibilities: Store away from incompatible materials.

3 Specific end use(s): Reserved for industrial and professional use.

Transport information

Land transport (ADR/RID)

Shippingopen allclose all
Remarks:
Not regulated.

Inland waterway transport (ADN(R))

Shippingopen allclose all
Remarks
Not regulated.

Marine transport (IMDG)

Remarks
Not regulated.

Air transport ICAO/IATA

Remarks
Not regulated.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

1 Control Parameters
Occupational Exposure Limits: None of the components have assigned exposure limits.

2 Exposure controls
Appropriate Engineering Controls: Provide adequate ventilation.
Individual protection measures, such as personal protective equipment
* General information: Use personal protective equipment as required. Personal protection equipment should be chosen according to the CEN standards and in discussion with the supplier of the personal protective equipment. Follow training instructions when handling this material.
* Eye/face protection: Safety goggles. EN 166.
* Hand Protection: Chemical resistant gloves, Protective gloves complying with EN 374., Suitable gloves can be recommended by the glove supplier.
* Skin and Body Protection: Chemical resistant clothing. EN13688
* Respiratory Protection: Dust mask
* Hygiene measures: Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing to remove contaminants. Discard contaminated footwear that cannot be cleaned.
* Environmental Controls: Do not empty into drains.

Stability and reactivity

1 Reactivity: Material is stable under normal conditions.
2 Chemical Stability: Material is stable under normal conditions.
3 Possibility of hazardous reactions: Not known.
4 Conditions to avoid: Avoid heat or contamination. Avoid dust formation.
5 Incompatible Materials: None known.
6 Hazardous Decomposition Products: By heating and fire, harmful vapors/gases may be formed.

Disposal considerations

Waste treatment methods
* General information: Disposal considerations (including disposal of contaminated containers or packaging) Dispose of waste at an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
* Disposal methods: Wash before disposal. Dispose to controlled facilities.
Since emptied containers retain product residue, follow label warnings even after container is emptied.
* Contaminated Packaging: Dispose in accordance with all applicable regulations.