Registration Dossier

Administrative data

First-aid measures

- General advice:
Immediately remove contaminated clothing.
- Following inhalation:
Keep patient calm, remove to fresh air, seek medical attention. Immediately administer a corticosteroid from a controlled/metered dose inhaler.
- Following skin contact:
Wash thoroughly with soap and water.
- Following eye contact:
Immediately wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an eye specialist.
- Following ingestion:
Rinse mouth immediately and then drink plenty of water, seek medical attention.
- Most important symptoms and effects:
Symptoms: The most important known symptoms and effects are described in the labelling (see section 2 of the MSDS) and/or in section 11 of the MSDS. Further important symptoms and effects are so far not known.

Fire-fighting measures

- Suitable extinguishing media: water spray, dry powder, foam.
- Special hazards arising from the substance or mixture: harmful vapours.
Evolution of fumes/fog. The substances/groups of substances mentioned can be released in case of fire.
- Advice for fire fighter:
Special protective equipment: wear a self-contained breathing apparatus.

Further information: the degree of risk is governed by the burning substance and the fire conditions. Contaminated extinguishing water must be disposed of in accordance with official regulations.

Accidental release measures

- Personal precautions, protective equipment and emergency procedures:
Use personal protective clothing. Breathing protection required.

- Environmental precautions:
Contain contaminated water/firefighting water. Do not discharge into drains/surface waters/groundwater.

- Methods and material for containment and cleaning up:
For large amounts: Pump off product.
For residues: Pick up with suitable absorbent material. Dispose of absorbed material in accordance with regulations.

Handling and storage

- Precautions for safe handling:
Ensure thorough ventilation of stores and work areas.
Protection against fire and explosion: Take precautionary measures against static discharges.

- Conditions for safe storage, including any incompatibilities:
The product in undamaged packing need not be stored separately.
Further information on storage conditions: Keep container tightly closed and dry; store in a cool place.
The packed product is not damaged by low temperatures or by frost.
Protect from temperatures above: 40 °C
The packed product must be protected against exceeding the indicated temperature.

Transport information

Land transport (ADR/RID)

UN number:
UN1993
Shippingopen allclose all
Class:
3
Packaging group:
III
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
UN1993
Shippingopen allclose all
Class:
3
Packaging group:
III
Remarksopen allclose all

Marine transport (IMDG)

UN number:
UN1993
Proper shipping name and description:
FLAMMABLE LIQUID, N.O.S. (contains DIACETONE ALCOHOL, TRIMETHYLOLPROPANE-TRIS-(BETA-AZIRIDINO)PROPIONATE)
Class:
3
Packaging group:
III
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
UN1993
Proper shipping name and description:
FLAMMABLE LIQUID, N.O.S. (contains DIACETONE ALCOHOL, TRIMETHYLOLPROPANE-TRIS-(BETA-AZIRIDINO)PROPIONATE)
Class:
3
Packaging group:
III
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

1. Components with occupational exposure limits
CAS# 151-56-4: ethyleneimine; aziridine (Content (W/W): <= 10 PPM)
CAS# 123-42-2: 4-hydroxy-4-methylpentan-2-one; diacetone alcohol (Content (W/W): 8.2 %)

2. General safety and hygiene measures
Handle in accordance with good industrial hygiene and safety practice. Wearing of closed work clothing is required additionally to the stated personal protection equipment. No eating, drinking, smoking or tobacco use at the place of work.

3. Hand protection:
Chemical resistant protective gloves (EN 374)
Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN 374): e.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), polyvinylchloride (0.7 mm) and other.
Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing.
Manufacturer's directions for use should be observed because of great diversity of types.

4. Body protection:
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).

5. Eye protection:
Tightly fitting safety goggles (cage goggles) (e.g. EN 166) and face shield.

6. Respiratory protection:
Suitable respiratory protection for lower concentrations or short-term effect: Gas filter for gases/vapours of organic compounds (boiling point >65 °C, e. g. EN 14387 Type A)

Stability and reactivity

1. Reactivity
No hazardous reactions if stored and handled as prescribed/indicated.

2. Chemical stability
The product is stable if stored and handled as prescribed/indicated.

3. Possibility of hazardous reactions
No hazardous reactions when stored and handled according to instructions.

4. Conditions to avoid
Avoid open flames.

5. Incompatible materials
Substances to avoid: acids

6. Hazardous decomposition products
No hazardous decomposition products known.

Disposal considerations

Waste treatment methods:

- Must be disposed of or incinerated in accordance with local regulations.

- Contaminated packaging:
Uncontaminated packaging can be re-used.
Packs that cannot be cleaned should be disposed of in the same manner as the contents.