Registration Dossier

Physical & Chemical properties

Partition coefficient

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
partition coefficient
Type of information:
experimental study
Adequacy of study:
key study
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to
Guideline:
OECD Guideline 117 (Partition Coefficient (n-octanol / water), HPLC Method)
Deviations:
yes
Remarks:
see details in the section results
GLP compliance:
yes (incl. certificate)
Type of method:
HPLC method
Partition coefficient type:
octanol-water
Analytical method:
high-performance liquid chromatography
Key result
Type:
log Pow
Partition coefficient:
ca. -4.29
Temp.:
40.1 °C
pH:
ca. 10.78
Details on results:
The Log Pow of the test item was calculated using the decimal logarithm of the capacity factor (k). Log Pow was calculated using extrapolation of regression line: log Pow was -4.29.
Repeatability: The values of log Pow derived from individual measurements are within a range of 0.1 log unit, so within the criteria of the OECD 117 guideline.

Deviation to the study plan:

There is no reference substance with a retention time below the test item retention time. The Log Pow measured with an extrapolation of the regression is < 0 (-4.29). Or in the § 8 « APPLICABILITY » of the Study plan (in accordance with the OECD guideline 117) it is clearly indicated: « The HPLC method covers log Pow in the range of 0 to 6. ». The above listed deviation has a major impact on the study conclusion. The Log Pow is estimated < 0 so it is not in the applicability range 0 to 6.

Conclusions:
The estimated Partition Coefficient (Pow) logarithm of 2-aminoethanol hydrobromide is < 0.
An extrapolation of the regression line estimates that the Partition Coefficient (Pow) logarithm is about -4.29. But it is important to note that as described in the guideline OECD 117 §4: “the HPLC method covers log Pow in the range of 0 to 6”. I.e. Deviation n°1.

Description of key information

Key value for chemical safety assessment

Log Kow (Log Pow):
-4.29
at the temperature of:
40.1 °C

Additional information