Registration Dossier

Administrative data

First-aid measures

- General advice:
As in all cases of potential poisoning, Obtain medical advice immediately.
- Following inhalation:
In the event of exposure to vapors, immediately remove from the area to a fresh air environment.
- Following skin contact:
Remove contaminated clothes. Wash skin with large volumes of water.
If irritation persists, or any sign of tissue damage is apparent, obtain medical advice immediately.
- Following eye contact:
In the event of contact with the eyes, irrigate with water for at least 15 minutes; obtain medical advice if irritation persists.
- Following ingestion:
In the event of accidental ingestion, rinse mouth with water. Give up to one tumbler (half pint) of milk or water.
Obtain medical advise immediately.
Do not induce vomiting, obtain medical advise immediately.
- Most important symptoms and effects:
No specific data available.

Fire-fighting measures

- Suitable extinguishing media:
In the event of fire, adequate extinguishers should be used. Avoid inhalation of smoke and fumes. In case of insufficient ventilation, wear suitable respiratory equipment.
Use standard procedures and preferred extinguishing media as stated below.
Extinguishing media: Foam, carbon dioxide or dry chemical.
- Unsuitable extinguishing media:
None reported.
- Special hazards arising from the substance or mixture:
None.
- Advice for fire fighter:
No specific advice.

Accidental release measures

- Personal precautions:
- Protective equipment and emergency procedures:
Adequate protective gloves should be worn when handling spillages. No smoking. Avoid naked flames or other potential sources of ignition (eg. electrical equipment).
Avoid skin contamination and inhalation of vapour.
Individual washing routines should be followed after any potential contact.
Ensure adequate ventilation in working areas following accidental releases.
- Environmental precautions:
Do not discharge directly into drains, air, into soil or into the aquatic environment.
- Methods and material for containment and cleaning up:
For containment:
Small spills can be wiped up with a cloth or paper. Standard absorbents can be used (saw dust, sand, vermiculite). Wear rubber gloves. Avoid contact with skin. If skin contact occurs, wash liberally with soap and water.
For cleaning-up:
Spillages should be disposed of in accordance with Governmental Regulations.

Handling and storage

- Precautions for safe handling:
Avoid contact with skin and eyes.
Wear adequate protective gloves protection and eye/face protection.
No smoking. Avoid any sources of ignition.
Avoid exposing to high temperature during processing.
Do not ingest or apply to the skin as such. Good personal washing routines should be followed.
Maintain adequate local and general ventilation where product is handled.

Protective measures
Keep strict control of dust accumulation to a minimum.Maintain adequate local and general ventilation where product is handled.Avoid any sources of ignition.

Advice on general occupational hygiene
Good personal washing routines should be followed.

- Conditions for safe storage, including any incompatibilities:
It is good general practice to store in closed, preferably full, containers away from heat sources, and protected from extremes of temperature. Do not re-use the empty container.
Respect generals rules for compatibility storage.

Transport information

Land transport (ADR/RID)

UN number:
3082
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
Language:
English
Class:
9
Packaging group:
III
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
3082
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
Class:
9
Packaging group:
III
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
3082
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
Class:
9
Packaging group:
III
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

- Control parameters
None specified.
- Exposure controls
Avoid exposing to high temperature during processing.
Maintain adequate local and general ventilation where product is handled.
- Appropriate engineering controls
Maintain adequate local and general ventilation where product is handled and dispensed.
- Environmental exposure controls
Not available at this time. Minimize release to the environment.
- Personal protection
Respiratory protection: None required; avoid breathing vapors.
Hand protection: Adequate Protective Gloves should be worn.
Eye protection: Adequate safety glasses should be used.
Skin protection: Wear protective clothing, overall if necessary to limit the odour contamination of personal
clothing. Individual washing routines should be followed after any potential contact.

Stability and reactivity

1. Reactivity
No reaction known with water.
2. Chemical stability
Presents no significant reactivity hazard. Normally stable even at elevated temperatures and pressures. Avoid temperatures above or near to the flash point. Not pyrophoric nor reactive with water. Does not undergo explosive decomposition, is shock stable, and is not an oxygen donor. Does not form explosive mixtures with other organic materials. Will not undergo hazardous exothermic polymerization.
3. Possibility of hazardous reactions
None known.
4. Conditions to avoid
Avoid temperatures above or at least 5 °C below flash point for any flammable liquids. Do not heat closed containers. Avoid contact with oxidizing agents.
5. Incompatible materials
Avoid strong oxidizing agents.
6. Hazardous decomposition products
Contact with water or storage under recommended conditions for one year should not produce dangerous decomposition products.

Disposal considerations

Waste treatment methods
Product: when being disposed of in its unused and uncontaminated state should be treated as a hazardous waste according to EC Directive 2008/98/EC. Any disposal practices must be in compliance with all national and provincial laws and any municipal or local by-laws governing hazardous waste.

Contaminated packaging:
for used, contaminated and residual materials additional evaluations may be required. Do not dump into any sewers, on the ground, or into any body of water.