Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 203-117-7
CAS number: 103-49-1
If breathed in : move person into fresh air.
Artificial respiration and/or oxygen may be necessary.
Consult a physician.
Victim to lie down in the recovery position, cover and keep him warm.
In case of skin contact : Take off contaminated clothing and shoes immediately.
Wash off immediately with plenty of water.
Call a physician immediately.
Wash contaminated clothing before reuse.
In case of eye contact : Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Remove contact lenses.
Consult a physician.
If swallowed : rinse mouth with water (only if the person is conscious)
Call a physician immediately.
Most important symptoms and effects, both acute and delayed
Symptoms : Inhalation may provoke the following symptoms:
Skin contact may provoke the following symptoms: Pain
In case of eye contact : Pain
Causes eye burns
Indication of any immediate medical attention and special treatment needed : Treat symptomatically
Suitable extinguishing media : Water mist
Carbon dioxide (CO2)
Use extinguishing measures that are appropriate to local cir-cumstances and the surrounding environment.
Unsuitable extinguishing media : Water spray jet
Special protective equipment for firefighters : In the event of fire, wear self-contained breathing apparatus.
Further information : In the event of fire, cool tanks with water spray.
Personal precautions : Evacuate personnel to safe areas.
Isolate the area.
Prevent further leakage or spillage if safe to do so.
Ensure adequate ventilation.
Keep away from open flames, hot surfaces and sources of ignition.
Environmental precautions : Should not be released into the environment.
Do not flush into surface water or sanitary sewer system.
Methods for cleaning up : Large spills: Dam up. Soak up with inert absorbent material. Keep in properly labelled containers.
Small spills: Gently cover the spill with an absorbent towel or pad.
Large spills + Small spills: Keep in suitable, closed containers for disposal. Treat recovered material as described in the section "Disposal considerations".
Advice on safe handling : To avoid thermal decomposition, do not overheat.
Use personal protective equipment as required.
Avoid inhalation, ingestion and contact with skin and eyes.
Prevent the dangers of splashing when transferring or diluting.
Requirements for storage areas and containers : To maintain product quality, do not store in heat or direct sunlight. Store in original container. Keep containers tightly closed in a cool, well-ventilated place. Store at room temperature.
Recommended storage tem-perature : 15 - 25 °C
Engineering measures : All personal protective equipment should be based on a risk assessment. Consult a Environment Health Safety expert if necessary.
Engineering controls should be used as the primary means to control possible exposures. Use process enclosures, local exhaust ventilation or other engineering controls to keep exposure levels below recommended exposure limits.
Personal protective equipment
Eye protection : Face-shield
Hand protection material : Neoprene
Remarks : Impervious gloves Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact).
Skin and body protection : chemical resistant apron, coat or coverall, Boots
Respiratory protection : Engineering controls should always be the primary method of controlling exposures.
If respiratory protective equipment is needed for certain activities, the type as well as the corresponding protection factor will depend upon the risk assessment and air concentrations, hazards, physical and warning properties of substances present.
Use only respiratory protection that conforms to international/ national standards.
Respirator with a vapour filter ABEK
Reactivity : None reasonably foreseeable.
Chemical stability : Stable under normal conditions.
Possibility of hazardous reactions : No dangerous reaction known under conditions of normal use.
Conditions to avoid : To avoid thermal decomposition, do not overheat. Heat, flames and sparks.
Incompatible materials : Strong oxidizing agents
Hazardous decomposition products : No data available
Product : Must be incinerated in a suitable incineration plant holding a permit delivered by the competent authorities.
In accordance with National, Federal, State and Local regulations.
Contaminated packaging : Empty containers should be taken to an approved waste handling site for recycling or disposal.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Deze website maakt gebruik van cookies om het surfen zo aangenaam mogelijk te maken.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again