Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove victim to fresh air. Give artificial respiration if
not breathing. Oxygen may be given by qualified personnel if
breathing is difficult. Get immediate medical attention.
Emergency measure - Eyes: Immediately flush eyes with plenty of water for at least 15
minutes. Get medical attention.
Emergency measure - Skin: Remove contaminated clothing. Immediately flush skin with
plenty of water for at least 15 minutes. Get medical
attention.
Emergency measure - Ingestion: Seek immediate medical attention.

Fire-fighting measures

Recommended extinguishing agent: Dry chemical or foam. For larger fires, flood fire area with
water from a distance.

Product arising from burning: Trimethylvinylsilane

Copper (II) bis(hexafluoroacetylacetonate)

Product determined by test: N

Protective equipment: Positive pressure self-contained breathing apparatus.

Double layer of gloves: outer layer should be acid
resistant, inner layer: latex.

Acid resistant splash apron. Appropriate footwear to prevent
skin contact. Other PPE appropriate to the fire situation.

Accidental release measures

Emergency measures in case of spillage: Isolate hazard area. Eliminate sources of ignition and
sources of moisture/water. Keep unnecessary and unprotected
personnel from entering the area. Use positive pressure self
contained breathing aparatus in emergency or when airborne
concentrations are unknown. Cover spill with dry vermiculite
or other dry, inert absorbent substance. Place in
appropriate chemical waste container.

Handling and storage

Handling: Handle and store in a dry, inert atmosphere, such as under a
blanket of nitrogen gas. Avoid breathing vapours and contact
with skin or eyes.


When handling the substance, wear a double layer of gloves
(outer layer: acid resistant, inner layer: latex), splash
apron, work uniform and shoes or coveralls to prevent skin
contact.


Use a NIOSH/MSHA approved respirator with organic vapour
cartridges. Use safety goggles or safety glasses with side
shields worn with a face shield.

Storage: Keep in a cool, dry, well ventilated area. Store in a
standard flammable liquids cabinet or room. Do not expose to
air or moisture. Avoid temperatures above 70°C.

Packaging of the substance and or preparation: The substance is transported in 1.2 litre and 20 litre
stainless steel drums. The 20 litre drum is confirmed TUV
approved.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport code: UN2810
Transport: The substance should be kept in an appropriate, tightly
closed container during transport. Containers should be
stored upright and secured against falling over. Containers
should be suitably labelled and sealed.


Packing Group III
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: Combustible liquid, combustion may produce toxic or
irritating aerosols. May ignite under extreme conditions
oftemperature or pressure. Cupra Select decomposes
non-violently on exposure to water or air to form corrosive
and extremely flammable products. Corrosive after 4 hour
exposure.

Dust explosion: Not applicable as substance is a liquid.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: In the event of a spill, it would be anticipated that Cupra
Select will quickly but non violently decompose. Due to the
decomposition as well as the recommended clean up procedure,
recycling and/or recovery of the material involved in a
spill would be difficult.


Schumacher is developing a reclaim procedure for one of the
reaction products resulting from routine use. Cupra Select
itself is reacted during normal use.

Industry - Possibility of neutralisation: None known.

Industry - Possibility of destruction: controlled discharge: Not recommended.

Industry - Possibility of destruction - incineration: Incineration is the preferred method of diposal. The
preparation may be disposed of by burning under controlled
conditions at a licensed waste treatment processor in
accordance with local regulations. Stack gases should be
scrubbed because noxious fumes could be formed. (eg carbon
and fluorine).

Industry - Possibility of destruction - water purification: In the unlikely event that the preparation should enter the
water treatment system, contaminated waste water sould be
treated by means of flocculation precipitation. The
precipitated material should then be incinerated.

Industry - Possibility of destruction - other: None known.

Public at large - Possibility of recovery/recycling: Not applicable as the substance will not enter the public
domain.