Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Obtain medical attention.
Emergency measure - Eyes: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.

Emergency measure - Skin: Immediately wash skin with soap and large amounts of water. Get medical attention if irritation develops.
Emergency measure - Ingestion: Obtain immediate medical attention.

Fire-fighting measures

Recommended extinguishing agent: Water fog, foam, CO2 Product arising from burning: Oxides of carbon Product determined by test: N Protective equipment: Respiratory and eye protection required for fire fighting personnel. Full protective equipment and self-contained breathing apparatus (SCBA) should be used in all indoor fires and any significant outdoor fires.

Accidental release measures

Emergency measures in case of spillage:Keep unnecessary and unprotected personnel away. Remove all sources of ignition. Wear appropriate personal protective equipment. Stop leak if possible without personal risk. Keep upwind, evacuate people downwind. Use non-sparking tools and equipment. Absorb on sand or vermiculite and place in closed containers for disposal. Ventilate area and wash spill site after material pickup is complete.

For large spills: Dyke far ahead of liquid spill for later disposal. Prevent runoff from entering waterways or sewers. Use non-sparking tools and equipment. Absorb on sand or vermiculite and place in closed containers for disposal. Ventilate area and wash spill site after material pickup is complete.

Handling and storage

Handling: Use only with adequate ventilation. Keep away from heat, sparks and flame. Keep container closed. Use explosion-proof electrical equipment. Take precautions against build-up of electrostatic charges. Avoid contact with eyes, skin and clothing. Wear appropriate personal protective equipment.
Provide hand and eyes wash station near work area. Wash thoroughly after handling. Storage: Storage under inert gas. Keep container tightly closed. Keep away from heat, flame, and all sources of ignition. Store in a cool dry place away from incompatible materials. Packaging of the substance and or preparation: The test substance is imported into the EU in plastic inkjet cartridges, containing ca. 60 g of ink (and ca. 10 g of test substance). Inkjet cartridges are in turn packaged in plastic bags and cardboard boxes.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport code: Not classified for transport.
Transport: The test substance or preparation should be transported in sealed containers, secured against falling or other shock.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Use only with adequate ventilation. Keep away from heat, sparks and flame. Keep container closed. Use explosion-proof electrical equipment. Take precautions against build-up of electrostatic charges. Avoid contact with eyes, skin and clothing. Wear appropriate personal protective equipment.

Stability and reactivity

Danger other than fire: None reported.

Chemical reaction with water: None reported.

Dust explosion: Not applicable as the test substance is a liquid.

Disposal considerations

Industry - Possibility of destruction - other: None.

Public at large - Possibility of recovery/recycling: Spilled MBD or ink material must be disposed of.

In general, recovery for re-use is not economically feasable
.

Public at large - Possibility of neutralisation: The cartridge containing the substance is not accessible
under normal operating conditions and is only available when
the inkjet cartridge is broken.


No specific hazard is known and hence, except for physical
removal there are no recommendations for the neutralisation
of any hazardous effects.

Public at large - Possibility of destruction: controlled discharge: Controlled discharge of the substance via landfill or
directly into watercourses is not recommended and should be
avoided.

Public at large - Possibility of destruction - incineration: It is estimated that 10% of the waste paper will be
destroyed by incineration.

Public at large - Possibility of destruction - water purification: Although the substance itself poses a low hazard to the
environment and is readily biodegradable, discharge of ink
containing the substance to sewage works is not recommended
and should be avoided

Public at large - Possibility of destruction - others: None.