Registration Dossier

Administrative data

First-aid measures

DESCRIPTION OF FIRST AID MEASURES

General Information
Remove contaminated soaked clothing immediately.
In the event of persistent symptoms receive medical treatment.

After Inhalation
Move to fresh air in case of accidental inhalation of dust or fumes from overheating or combustion.
In the event of symptoms refer for medical treatment.

After Contact With Skin
Wash with water and soap as a precaution.
Consult a doctor if skin irritation persists.

After Contact With Eyes
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
If eye irritation persists, consult a specialist.

After Ingestion
Rinse out mouth and give plenty of water to drink.
Never give anything by mouth to an unconscious person.
Consult a physician

MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED
Harmful if swallowed.
May cause sensitisation by skin contact.

INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDED
Treat symptoms.

Fire-fighting measures

EXTINGUISHING MEDIA

Suitable Extinguishing Media
Foam, carbon dioxide (CO2), dry chemical, water-spray.

Extinguishing Media Which Must Not Be Used For Safety Reasons
Full water jet.

SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE
Fire may produce : Carbon monoxide (CO), carbon dioxide (CO2) and nitrogen oxides (NOx).
Dust may form explosive mixture in air.

ADVICE FOR FIREFIGHTERS
Use breathing apparatus with independent air supply.
Protective suit.
Evacuate personnel to safe areas.

Additional Information
Cool containers at risk with water spray jet.
Do not release chemically contaminated water into drains, soil or surface waters. Sufficient measures must be taken to retain water used for extinguishing.

Accidental release measures

PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES
Respirator must be worn if exposed to dust.
Ensure adequate ventilation.
Use personal protective clothing.
Remove all sources of ignition.
Dust may form explosive mixture in air.
Keep away from incompatible products.

ENVIRONMENTAL PRECAUTIONS
Do not discharge into the drains/surface waters/groundwater.

METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP
Pick up mechanically, avoiding dust, and provide disposal in suitable recipients.
Keep away from flammable substances.
Keep away from incompatible substances.

Handling and storage

PRECAUTIONS FOR SAFE HANDLING

Advice On Safe Handling
Keep container tightly closed.
Provide appropriate exhaust ventilation at machinery and at places where dust can be generated.
Do not breathe dust.
Avoid contact with skin, eyes and clothing.

Advice On Protection Against Fire And Explosion
Keep away from sources of ignition.
Dust may form explosive mixture in air.
Avoid formation of dust.
Avoid heat.
Keep away from flammable substances.
Keep away from incompatible substances.

CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES

Requirements For Storage Rooms And Vessels
Keep containers tightly closed in a dry, well ventilated place.

Advice On Storage Compatibility
Do not store together with reducing agents.
Do not store with flammable substances.
Do not store with organic solvents.

Further Information On Storage Conditions
Keep away from food, drink and animal feeding stuffs.
Keep away from incompatible substances.

SPECIFIC END USE(S)
Hair-colouring component.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

CONTROL PARAMETERS

Additional Advice On Limit Values
Obey TLV for common dust, if applicable.

EXPOSURE CONTROLS

Occupational Exposure Controls
Ensure adequate ventilation, especially in confined areas.

Protective And Hygiene Measures
Wash hands before breaks and immediately after handling the product.
When using, do not eat, drink or smoke.
Do not wear contact lenses when handling the product.

Respirator Protection
Respirator must be worn if exposed to dust.

Hand Protection
Protective gloves resistant to chemicals made of nitrile, minimum coat thickness 0.4mm, permeation resistance (wear duration) approx. 480 minutes, ie : protective glove made by www.kcl.de.
This recommendation refers exclusively to the chemical compatibility and the laboratory conforming to EN 374 carried out under laboratory conditions.
Requirements can vary as a function of the use. Therefore it is necessary to adhere additionally to the recommendations given by the manufacturer of protective gloves.

Eye Protection
Eye wash bottle with pure water.
Tightly fitting goggles.

Skin Protection
Long sleeved clothing.

Stability and reactivity

REACTIVITY
No decomposition if stored and applied as directed.

CHEMICAL STABILITY
Stable under normal conditions.

POSSIBILITY OF HAZARDOUS REACTIONS
Risk of dust explosions.
Product is a strong oxidising agent.

CONDITIONS TO AVOID
To avoid thermal decomposition, do not overheat.

INCOMPATIBLE MATERIALS
Reducing agents, flammable substances, organic solvents.

HAZARDOUS DECOMPOSITION PRODUCTS
Carbon monoxide (CO), carbon dioxide (CO2) and nitrogen oxides (NOx).

Disposal considerations

WASTE TREATMENT METHODS

Advice On Disposal
Can be incinerated, when in compliance with local regulations.
Where possible recycling is preferred to disposal.

Contaminated Packaging
Empty containers should be taken for local recycling, recovery or waste disposal.
Contaminated packaging should be emptied as far as possible and after appropriate cleansing may be taken for reuse.
Packaging that cannot be cleaned should be disposed of like the product.