Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Important to note: Since the registration substance is exclusively handled as solution in propan-2-ol, all recommendations and measures given in this Guidance on Safe Use apply for the solution.

General advice: Remove/Take off immediately all contaminated clothing. Get medical advice / attention if you feel unwell.
If inhaled: If inhaled, remove to fresh air. Get medical advice / attention.
In case of skin conntact: In case of contact with skin, wadh off repeatedly with polyethylene glycol 400 or edible oil, alternative with water and soap, for at leat 15 to 20 minutes.
In case of eye contact: In case of eye contact, rinse repeatedly with polyethlyene glycol 400 or edible oil, alternating with water, for at least 15 to 20 minutes.
If swallowed: If swallowed do not induce vomiting,seek medical advice and show safety datasheet or label

Fire-fighting measures

Suitable extinguishing media : Water spray jet
Alcohol-resistant foam
Dry powder
Carbon dioxide (CO2)
Unsuitable extinguishing media: High volume water jet

Specific hazards during firefighting : In case of fires, hazardous combustion gases are formed:
Carbon monoxide (CO)
Carbon dioxide (CO2)
Nitrogen oxides (NOx)

Special protective equipment
for firefighters : Self-contained breathing apparatus
Further information : Wear suitable protective equipment.

Accidental release measures

Handling and storage

The substance is to be handled under strictly controlled conditions. Use only with LEV and in well-ventilated areas.

Hygiene measures
Wash hands before breaks and at the end of workday.
Take off immediately all contaminated clothing and wash it before reuse.

Keep container tightly closed and in a well-ventilated place.
Handle and open container with care.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Eye protection: Depending on the risk, wear sufficient eye protection (safety glasses with side protection or goggles, and if necessary, face shield.)

Hand protection:
Break through time : 480 min
Glove thickness : 0,7 mm
Remarks : Long-term exposure Impervious butyl rubber gloves
Break through time : 30 min
Glove thickness : 0,4 mm
For short-term exposure (splash protection): Nitrile rubber
gloves.
These types of protective gloves are offered by various
manufacturers. Please note the manufacturers´ detailed
statements, especially about the minimum thickness and the
minimum breakthrough time. Consider also the particular
working conditions under which the gloves are being used.

Skin and body protection : Wear suitable protective equipment.

Respiratory protection
Use respiratory protection in case of insufficient exhaust
ventilation or prolonged exposure
Full mask, filter A
Full mask to standard DIN EN 136
Filter class 2
Applicable national Regulations must be observed. Take note
of the limitations regarding wear-time, in conjunction with the
Regulations for the use of Respiratory Protective Equipment.
The use of filter apparatus presupposes that the environment
atmosphere contains at least 17% oxygen by volume, and
does not exceed the maximum gas concentration, usually
0.5% by volume. Relevant guidelines to be considered
include EN 136/141/143/371/372 as well as other national
regulations.

Protective measures
Observe the usual precautions for handling chemicals.
Avoid contact with skin and eyes.

Stability and reactivity

Materials to avoid : Strong oxidizing agents

Disposal considerations

Product should be taken to a suitable and authorized waste
disposal site in accordance with relevant regulations and if
necessary after consultation with the waste disposal operator
and/or the competent Authorities

Packaging that cannot be cleaned should be disposed of as
product waste