Registration Dossier

Skin Irritation:

The dermal irritation potential of Trisodium 2-[(E)-2-(3-methyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonate was estimated using OECD QSAR toolbox version 3.3 with logPow as the primary descriptor.

Trisodium 2-[(E)-2-(3-methyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonate was estimated to be not irritating to the skin of New Zealand White rabbits.

Based on the estimated result; Trisodium 2-[(E)-2-(3-meathyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonate can be considered not irritating to skin and can be classified under the category “Not classified” as per CLP regulation.

Eye Irritation:

The ocular irritation potential of Trisodium 2-[(E)-2-(3-methyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonate was estimated using OECD QSAR toolbox version 3.3 with logPow as the primary descriptor.

Trisodium 2-[(E)-2-(3-methyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonate was estimated to be not irritating to the eyes of New Zealand White rabbits.

Based on the estimated results, Trisodium 2-[(E)-2-(3-methyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonate can be considered not irritating to eyes and can be classified under the category “Not Classified” as per CLP regulation.

Reference

Endpoint:

skin irritation: in vivo

Type of information:

(Q)SAR

Adequacy of study:

weight of evidence

Reliability:

2 (reliable with restrictions)

Rationale for reliability incl. deficiencies:

results derived from a valid (Q)SAR model and falling into its applicability domain, with limited documentation / justification

Justification for type of information:

data is from OECD QSAR toolbox v3.3 and the QMRF report has been attached

Qualifier:

according to guideline

Guideline:

other: Estimated data

Principles of method if other than guideline:

Sodium erythorbate powder (2000 mg/kg) was applied to the intact and abraded skin of six rabbits. Each test site was moistened with physiological saline just prior to dosing. After application of the test material, the exposure area was covered with a dou

GLP compliance:

not specified

Specific details on test material used for the study:

Name of the test chemical: Trisodium 2-[(E)-2-(3-methyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonate
Molecular Formula: C22H17N4Na3O13S4
Molecular Weight: 742.6253 g/mol
SMILES Notation: [Na+].CC1C(N=Nc2ccc3c(S(=O)(=O)[O-])cccc3c2S(=O)(=O)[O])C(=O)N(c2ccc(S(=O)(=O)CCOS(=O)(=O)[O-])cc2)N=1.[Na+].[Na+]
InChI: 1S/C22H20N4O13S4.3Na/c1-13-20(22(27)26(25-13)14-5-7-15(8-6-14)40(28,29)12-11-39-43(36,37)38)24-23-18-10-9-16-17(21(18)42(33,34)35)3-2-4-19(16)41(30,31)32;;;/h2-10,20H,11-12H2,1H3,(H,30,31,32)(H,33,34,35)(H,36,37,38);;;/q;3*+1/p-3/b24-23+;;;
Substance Type: Organic
Physical State: Solid

Species:

rabbit

Strain:

New Zealand White

Details on test animals or test system and environmental conditions:

no data available

Type of coverage:

semiocclusive

Preparation of test site:

shaved

Vehicle:

not specified

Controls:

not specified

Amount / concentration applied:

500mg

Duration of treatment / exposure:

4hours

Observation period:

72 hours

Number of animals:

3

Details on study design:

no data available

Irritation parameter:

overall irritation score

Basis:

mean

Time point:

72 h

Reversibility:

not specified

Remarks on result:

no indication of irritation

Irritant / corrosive response data:

No signs of irritation observed

Estimation method: Takes mode value from the 5 nearest neighbours
Domain logical expression:Result: In Domain

(((((("a" or "b" or "c" or "d" or "e" ) and ("f" and ( not "g") ) ) and "h" ) and ("i" and ( not "j") ) ) and ("k" and ( not "l") ) ) and ("m" and "n" ) )

Domain logical expression index: "a"

Referential boundary: The target chemical should be classified as Naphthalene sulfonic acids, condensates by OECD HPV Chemical Categories

Domain logical expression index: "b"

Referential boundary: The target chemical should be classified as Vinyl Sulfones by US-EPA New Chemical Categories

Domain logical expression index: "c"

Referential boundary: The target chemical should be classified as SN1 OR SN1 >> Nitrenium Ion formation OR SN1 >> Nitrenium Ion formation >> Aromatic azo OR SN1 >> Nitrenium Ion formation >> Unsaturated heterocyclic azo by DNA binding by OECD ONLY

Domain logical expression index: "d"

Referential boundary: The target chemical should be classified as Schiff base formation OR Schiff base formation >> Pyrazolones and Pyrazolidinones derivatives OR Schiff base formation >> Pyrazolones and Pyrazolidinones derivatives >> Pyrazolones and Pyrazolidinones by Protein binding by OASIS v1.3 ONLY

Domain logical expression index: "e"

Referential boundary: The target chemical should be classified as Acylation OR Acylation >> Direct Acylation Involving a Leaving group OR Acylation >> Direct Acylation Involving a Leaving group >> Acetates OR SN2 OR SN2 >> SN2 reaction at sp3 carbon atom OR SN2 >> SN2 reaction at sp3 carbon atom >> Alkyl diazo by Protein binding by OECD ONLY

Domain logical expression index: "f"

Referential boundary: The target chemical should be classified as No alert found by DNA binding by OASIS v.1.3

Domain logical expression index: "g"

Referential boundary: The target chemical should be classified as AN2 OR AN2 >> Michael-type addition on alpha, beta-unsaturated carbonyl compounds OR AN2 >> Michael-type addition on alpha, beta-unsaturated carbonyl compounds >> Four- and Five-Membered Lactones OR AN2 >> Schiff base formation by aldehyde formed after metabolic activation OR AN2 >> Schiff base formation by aldehyde formed after metabolic activation >> Geminal Polyhaloalkane Derivatives OR AN2 >> Shiff base formation after aldehyde release OR AN2 >> Shiff base formation after aldehyde release >> Specific Acetate Esters OR AN2 >> Shiff base formation for aldehydes OR AN2 >> Shiff base formation for aldehydes >> Geminal Polyhaloalkane Derivatives OR Non-covalent interaction OR Non-covalent interaction >> DNA intercalation OR Non-covalent interaction >> DNA intercalation >> DNA Intercalators with Carboxamide Side Chain OR Non-specific OR Non-specific >> Incorporation into DNA/RNA, due to structural analogy with nucleoside bases OR Non-specific >> Incorporation into DNA/RNA, due to structural analogy with nucleoside bases >> Specific Imine and Thione Derivatives OR Radical OR Radical >> Radical mechanism via ROS formation (indirect) OR Radical >> Radical mechanism via ROS formation (indirect) >> Geminal Polyhaloalkane Derivatives OR Radical >> Radical mechanism via ROS formation (indirect) >> Nitro Azoarenes OR Radical >> Radical mechanism via ROS formation (indirect) >> Nitroarenes with Other Active Groups OR Radical >> Radical mechanism via ROS formation (indirect) >> p-Substituted Mononitrobenzenes OR Radical >> Radical mechanism via ROS formation (indirect) >> Single-Ring Substituted Primary Aromatic Amines OR Radical >> Radical mechanism via ROS formation (indirect) >> Specific Imine and Thione Derivatives OR SN1 OR SN1 >> Alkylation after metabolically formed carbenium ion species OR SN1 >> Alkylation after metabolically formed carbenium ion species >> Polycyclic Aromatic Hydrocarbon Derivatives OR SN1 >> Nucleophilic attack after carbenium ion formation OR SN1 >> Nucleophilic attack after carbenium ion formation >> Specific Acetate Esters OR SN1 >> Nucleophilic attack after diazonium or carbenium ion formation OR SN1 >> Nucleophilic attack after diazonium or carbenium ion formation >> Nitroarenes with Other Active Groups OR SN1 >> Nucleophilic attack after metabolic nitrenium ion formation OR SN1 >> Nucleophilic attack after metabolic nitrenium ion formation >> Single-Ring Substituted Primary Aromatic Amines OR SN1 >> Nucleophilic attack after reduction and nitrenium ion formation OR SN1 >> Nucleophilic attack after reduction and nitrenium ion formation >> Nitro Azoarenes OR SN1 >> Nucleophilic attack after reduction and nitrenium ion formation >> Nitroarenes with Other Active Groups OR SN1 >> Nucleophilic attack after reduction and nitrenium ion formation >> p-Substituted Mononitrobenzenes OR SN1 >> Nucleophilic substitution on diazonium ions OR SN1 >> Nucleophilic substitution on diazonium ions >> Specific Imine and Thione Derivatives OR SN2 OR SN2 >> Acylation OR SN2 >> Acylation >> Specific Acetate Esters OR SN2 >> Acylation involving a leaving group OR SN2 >> Acylation involving a leaving group >> Geminal Polyhaloalkane Derivatives OR SN2 >> Acylation involving a leaving group after metabolic activation OR SN2 >> Acylation involving a leaving group after metabolic activation >> Geminal Polyhaloalkane Derivatives OR SN2 >> Alkylation, direct acting epoxides and related after P450-mediated metabolic activation OR SN2 >> Alkylation, direct acting epoxides and related after P450-mediated metabolic activation >> Polycyclic Aromatic Hydrocarbon Derivatives OR SN2 >> Alkylation, ring opening SN2 reaction OR SN2 >> Alkylation, ring opening SN2 reaction >> Four- and Five-Membered Lactones OR SN2 >> DNA alkylation OR SN2 >> DNA alkylation >> Vicinal Dihaloalkanes OR SN2 >> Internal SN2 reaction with aziridinium and/or cyclic sulfonium ion formation (enzymatic) OR SN2 >> Internal SN2 reaction with aziridinium and/or cyclic sulfonium ion formation (enzymatic) >> Vicinal Dihaloalkanes OR SN2 >> Nucleophilic substitution at sp3 Carbon atom OR SN2 >> Nucleophilic substitution at sp3 Carbon atom >> Specific Acetate Esters OR SN2 >> Nucleophilic substitution at sp3 carbon atom after thiol (glutathione) conjugation OR SN2 >> Nucleophilic substitution at sp3 carbon atom after thiol (glutathione) conjugation >> Geminal Polyhaloalkane Derivatives OR SN2 >> SN2 attack on activated carbon Csp3 or Csp2 OR SN2 >> SN2 attack on activated carbon Csp3 or Csp2 >> Nitroarenes with Other Active Groups by DNA binding by OASIS v.1.3

Domain logical expression index: "h"

Referential boundary: The target chemical should be classified as Acylation AND Acylation >> Direct Acylation Involving a Leaving group AND Acylation >> Direct Acylation Involving a Leaving group >> Acetates AND SN2 AND SN2 >> SN2 reaction at sp3 carbon atom AND SN2 >> SN2 reaction at sp3 carbon atom >> Alkyl diazo by Protein binding by OECD ONLY

Domain logical expression index: "i"

Referential boundary: The target chemical should be classified as Alkali Earth AND Non-Metals by Groups of elements

Domain logical expression index: "j"

Referential boundary: The target chemical should be classified as Alkaline Earth OR Halogens by Groups of elements

Domain logical expression index: "k"

Referential boundary: The target chemical should be classified as (!Undefined)Group All Lipid Solubility < 0.01 g/kg AND (!Undefined)Group CNS Surface Tension > 62 mN/m AND Group All log Kow < -3.1 AND Group All Melting Point > 200 C AND Group CNS log Kow < 0.5 AND Group CNS log Kow < -2 AND Group CNS Melting Point > 120 C AND Group CNS Melting Point > 50 C AND Group CNS Molecular Weight > 620 g/mol by Skin irritation/corrosion Exclusion rules by BfR

Domain logical expression index: "l"

Referential boundary: The target chemical should be classified as (!Undefined)Group C Surface Tension > 62 mN/m OR (!Undefined)Group CN Lipid Solubility < 0.4 g/kg OR Group All log Kow > 9 OR Group C Aqueous Solubility < 0.0001 g/L OR Group C Melting Point > 55 C OR Group C Molecular Weight > 350 g/mol OR Group C Vapour Pressure < 0.0001 Pa OR Group CN Aqueous Solubility < 0.0001 g/L OR Group CN Aqueous Solubility < 0.1 g/L OR Group CN log Kow > 4.5 OR Group CN log Kow > 5.5 OR Group CN Melting Point > 180 C OR Group CN Molecular Weight > 290 g/mol OR Group CN Molecular Weight > 540 g/mol OR Group CN Vapour Pressure < 0.001 Pa by Skin irritation/corrosion Exclusion rules by BfR

Domain logical expression index: "m"

Parametric boundary:The target chemical should have a value of log Kow which is >= -7.06

Domain logical expression index: "n"

Parametric boundary:The target chemical should have a value of log Kow which is <= -0.594

Interpretation of results:

other: not irritating

Conclusions:

cTrisodium 2-[(E)-2-(3-methyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonate was estimated to be not irritating to the skin of New Zealand White rabbits.

Executive summary:

The dermal irritation potential of Trisodium 2-[(E)-2-(3-methyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonate was estimated using OECD QSAR toolbox version 3.3 with logPow as the primary descriptor.

Trisodium 2-[(E)-2-(3-methyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonate was estimated to be not irritating to the skin of New Zealand White rabbits.

Based on the estimated result; Trisodium 2-[(E)-2-(3-meathyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonate can be considered not irritating to skin and can be classified under the category “Not classified” as per CLP regulation.

Endpoint conclusion:

no adverse effect observed (not irritating)

Reference

Endpoint:

eye irritation: in vivo

Type of information:

(Q)SAR

Adequacy of study:

weight of evidence

Reliability:

2 (reliable with restrictions)

Rationale for reliability incl. deficiencies:

results derived from a valid (Q)SAR model and falling into its applicability domain, with limited documentation / justification

Justification for type of information:

Data is from OECD QSAR toolbox v3.3 and the QMRF report has been attached

Qualifier:

according to guideline

Guideline:

other: estimated data

Principles of method if other than guideline:

Prediction was done using OECD QSAR toolbox v 3.3

GLP compliance:

not specified

Specific details on test material used for the study:

Name of the test chemical: Trisodium 2-[(E)-2-(3-methyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonate
Molecular Formula: C22H17N4Na3O13S4
Molecular Weight: 742.6253 g/mol
SMILES Notation: [Na+].CC1C(N=Nc2ccc3c(S(=O)(=O)[O-])cccc3c2S(=O)(=O)[O])C(=O)N(c2ccc(S(=O)(=O)CCOS(=O)(=O)[O-])cc2)N=1.[Na+].[Na+]
InChI: 1S/C22H20N4O13S4.3Na/c1-13-20(22(27)26(25-13)14-5-7-15(8-6-14)40(28,29)12-11-39-43(36,37)38)24-23-18-10-9-16-17(21(18)42(33,34)35)3-2-4-19(16)41(30,31)32;;;/h2-10,20H,11-12H2,1H3,(H,30,31,32)(H,33,34,35)(H,36,37,38);;;/q;3*+1/p-3/b24-23+;;;
Substance Type: Organic
Physical State: Solid

Species:

rabbit

Strain:

New Zealand White

Details on test animals or tissues and environmental conditions:

no data available

Vehicle:

not specified

Controls:

not specified

Amount / concentration applied:

100 mg

Duration of treatment / exposure:

5 seconds

Observation period (in vivo):

72 hours

Duration of post- treatment incubation (in vitro):

no data available

Number of animals or in vitro replicates:

3

Details on study design:

no data available

Other effects / acceptance of results:

no data available

Irritation parameter:

overall irritation score

Basis:

mean

Time point:

72 h

Reversibility:

not specified

Remarks on result:

no indication of irritation

Irritant / corrosive response data:

No signs of irritation observed

Estimation method: Takes mode value from the 6 nearest neighbours
Domain logical expression:Result: In Domain

((((((("a" or "b" or "c" or "d" or "e" ) and ("f" and ( not "g") ) ) and ("h" and ( not "i") ) ) and ("j" and ( not "k") ) ) and ("l" and ( not "m") ) ) and "n" ) and ("o" and "p" ) )

Domain logical expression index: "a"

Referential boundary: The target chemical should be classified as Naphthalene sulfonic acids, condensates by OECD HPV Chemical Categories

Domain logical expression index: "b"

Referential boundary: The target chemical should be classified as Vinyl Sulfones by US-EPA New Chemical Categories

Domain logical expression index: "c"

Referential boundary: The target chemical should be classified as SN1 OR SN1 >> Nitrenium Ion formation OR SN1 >> Nitrenium Ion formation >> Aromatic azo OR SN1 >> Nitrenium Ion formation >> Unsaturated heterocyclic azo by DNA binding by OECD ONLY

Domain logical expression index: "d"

Referential boundary: The target chemical should be classified as Schiff base formation OR Schiff base formation >> Pyrazolones and Pyrazolidinones derivatives OR Schiff base formation >> Pyrazolones and Pyrazolidinones derivatives >> Pyrazolones and Pyrazolidinones by Protein binding by OASIS v1.3 ONLY

Domain logical expression index: "e"

Referential boundary: The target chemical should be classified as Acylation OR Acylation >> Direct Acylation Involving a Leaving group OR Acylation >> Direct Acylation Involving a Leaving group >> Acetates OR SN2 OR SN2 >> SN2 reaction at sp3 carbon atom OR SN2 >> SN2 reaction at sp3 carbon atom >> Alkyl diazo by Protein binding by OECD ONLY

Domain logical expression index: "f"

Referential boundary: The target chemical should be classified as No alert found by DNA binding by OASIS v.1.3

Domain logical expression index: "g"

Referential boundary: The target chemical should be classified as AN2 OR AN2 >> Michael-type addition on alpha, beta-unsaturated carbonyl compounds OR AN2 >> Michael-type addition on alpha, beta-unsaturated carbonyl compounds >> Four- and Five-Membered Lactones OR AN2 >> Schiff base formation by aldehyde formed after metabolic activation OR AN2 >> Schiff base formation by aldehyde formed after metabolic activation >> Geminal Polyhaloalkane Derivatives OR AN2 >> Shiff base formation after aldehyde release OR AN2 >> Shiff base formation after aldehyde release >> Specific Acetate Esters OR AN2 >> Shiff base formation for aldehydes OR AN2 >> Shiff base formation for aldehydes >> Geminal Polyhaloalkane Derivatives OR Non-covalent interaction OR Non-covalent interaction >> DNA intercalation OR Non-covalent interaction >> DNA intercalation >> DNA Intercalators with Carboxamide Side Chain OR Non-specific OR Non-specific >> Incorporation into DNA/RNA, due to structural analogy with nucleoside bases OR Non-specific >> Incorporation into DNA/RNA, due to structural analogy with nucleoside bases >> Specific Imine and Thione Derivatives OR Radical OR Radical >> Radical mechanism via ROS formation (indirect) OR Radical >> Radical mechanism via ROS formation (indirect) >> Geminal Polyhaloalkane Derivatives OR Radical >> Radical mechanism via ROS formation (indirect) >> Nitro Azoarenes OR Radical >> Radical mechanism via ROS formation (indirect) >> Nitroarenes with Other Active Groups OR Radical >> Radical mechanism via ROS formation (indirect) >> p-Substituted Mononitrobenzenes OR Radical >> Radical mechanism via ROS formation (indirect) >> Single-Ring Substituted Primary Aromatic Amines OR Radical >> Radical mechanism via ROS formation (indirect) >> Specific Imine and Thione Derivatives OR SN1 OR SN1 >> Alkylation after metabolically formed carbenium ion species OR SN1 >> Alkylation after metabolically formed carbenium ion species >> Polycyclic Aromatic Hydrocarbon Derivatives OR SN1 >> Nucleophilic attack after carbenium ion formation OR SN1 >> Nucleophilic attack after carbenium ion formation >> Specific Acetate Esters OR SN1 >> Nucleophilic attack after diazonium or carbenium ion formation OR SN1 >> Nucleophilic attack after diazonium or carbenium ion formation >> Nitroarenes with Other Active Groups OR SN1 >> Nucleophilic attack after metabolic nitrenium ion formation OR SN1 >> Nucleophilic attack after metabolic nitrenium ion formation >> Single-Ring Substituted Primary Aromatic Amines OR SN1 >> Nucleophilic attack after reduction and nitrenium ion formation OR SN1 >> Nucleophilic attack after reduction and nitrenium ion formation >> Nitro Azoarenes OR SN1 >> Nucleophilic attack after reduction and nitrenium ion formation >> Nitroarenes with Other Active Groups OR SN1 >> Nucleophilic attack after reduction and nitrenium ion formation >> p-Substituted Mononitrobenzenes OR SN1 >> Nucleophilic substitution on diazonium ions OR SN1 >> Nucleophilic substitution on diazonium ions >> Specific Imine and Thione Derivatives OR SN2 OR SN2 >> Acylation OR SN2 >> Acylation >> Specific Acetate Esters OR SN2 >> Acylation involving a leaving group OR SN2 >> Acylation involving a leaving group >> Geminal Polyhaloalkane Derivatives OR SN2 >> Acylation involving a leaving group after metabolic activation OR SN2 >> Acylation involving a leaving group after metabolic activation >> Geminal Polyhaloalkane Derivatives OR SN2 >> Alkylation, direct acting epoxides and related after P450-mediated metabolic activation OR SN2 >> Alkylation, direct acting epoxides and related after P450-mediated metabolic activation >> Polycyclic Aromatic Hydrocarbon Derivatives OR SN2 >> Alkylation, ring opening SN2 reaction OR SN2 >> Alkylation, ring opening SN2 reaction >> Four- and Five-Membered Lactones OR SN2 >> DNA alkylation OR SN2 >> DNA alkylation >> Vicinal Dihaloalkanes OR SN2 >> Internal SN2 reaction with aziridinium and/or cyclic sulfonium ion formation (enzymatic) OR SN2 >> Internal SN2 reaction with aziridinium and/or cyclic sulfonium ion formation (enzymatic) >> Vicinal Dihaloalkanes OR SN2 >> Nucleophilic substitution at sp3 Carbon atom OR SN2 >> Nucleophilic substitution at sp3 Carbon atom >> Specific Acetate Esters OR SN2 >> Nucleophilic substitution at sp3 carbon atom after thiol (glutathione) conjugation OR SN2 >> Nucleophilic substitution at sp3 carbon atom after thiol (glutathione) conjugation >> Geminal Polyhaloalkane Derivatives OR SN2 >> SN2 attack on activated carbon Csp3 or Csp2 OR SN2 >> SN2 attack on activated carbon Csp3 or Csp2 >> Nitroarenes with Other Active Groups by DNA binding by OASIS v.1.3

Domain logical expression index: "h"

Referential boundary: The target chemical should be classified as Not known precedent reproductive and developmental toxic potential by DART scheme v.1.0

Domain logical expression index: "i"

Referential boundary: The target chemical should be classified as Allantoin and dimethadione-like derivatives (17b) OR Alpha aryloxy substituted acetic acid (9c) OR Barbital and ETU, PLTU-like derivatives (17a) OR Known precedent reproductive and developmental toxic potential OR Miscellaneous cyclic chemicals (18) OR NO2-alkyl/NO2-benzene derivatives (8b) OR Polyhalogenated benzene derivatives (8c) OR Purine and pyrimidine-like derivatives (7b) OR Toluene and small alkyl toluene derivatives (8a) OR Triarylmethane dyes (12c) by DART scheme v.1.0

Domain logical expression index: "j"

Referential boundary: The target chemical should be classified as (!Undefined)Group All Lipid Solubility < 0.01 g/kg AND (!Undefined)Group CNS Surface Tension > 62 mN/m AND Group All log Kow < -3.1 AND Group All Melting Point > 200 C AND Group CNS log Kow < 0.5 AND Group CNS log Kow < -2 AND Group CNS Melting Point > 120 C AND Group CNS Melting Point > 50 C AND Group CNS Molecular Weight > 620 g/mol by Skin irritation/corrosion Exclusion rules by BfR

Domain logical expression index: "k"

Referential boundary: The target chemical should be classified as (!Undefined)Group C Surface Tension > 62 mN/m OR (!Undefined)Group CN Lipid Solubility < 0.4 g/kg OR (!Undefined)Group CNHal Lipid Solubility < 4 g/kg OR (!Undefined)Group CNHal Lipid Solubility < 400 g/kg OR Group All log Kow > 9 OR Group C Aqueous Solubility < 0.0001 g/L OR Group C Melting Point > 55 C OR Group C Molecular Weight > 350 g/mol OR Group C Vapour Pressure < 0.0001 Pa OR Group CN Aqueous Solubility < 0.0001 g/L OR Group CN Aqueous Solubility < 0.1 g/L OR Group CN log Kow > 4.5 OR Group CN log Kow > 5.5 OR Group CN Melting Point > 180 C OR Group CN Molecular Weight > 290 g/mol OR Group CN Molecular Weight > 540 g/mol OR Group CN Vapour Pressure < 0.001 Pa OR Group CNHal Aqueous Solubility < 0.001 g/L OR Group CNHal Aqueous Solubility < 0.1 g/L OR Group CNHal log Kow > 3.8 OR Group CNHal Molecular Weight > 370 g/mol OR Group CNHal Molecular Weight > 380 g/mol by Skin irritation/corrosion Exclusion rules by BfR

Domain logical expression index: "l"

Referential boundary: The target chemical should be classified as Alkali Earth AND Non-Metals by Groups of elements

Domain logical expression index: "m"

Referential boundary: The target chemical should be classified as Halogens by Groups of elements

Domain logical expression index: "n"

Similarity boundary:Target: CC1C(N=Nc2ccc3c(S(=O)(=O)O{-}.[Na]{+})cccc3c2S(=O)(=O)O{-}.[Na]{+})C(=O)N(c2ccc(S(=O)(=O)CCOS(=O)(=O)O{-}.[Na]{+})cc2)N=1
Threshold=20%,
Dice(Atom centered fragments)
Atom type; Count H attached; Hybridization

Domain logical expression index: "o"

Parametric boundary:The target chemical should have a value of log Kow which is >= -7.06

Domain logical expression index: "p"

Parametric boundary:The target chemical should have a value of log Kow which is <= 1.77

Interpretation of results:

other: not irritating

Conclusions:

Trisodium 2-[(E)-2-(3-methyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonate was estimated to be not irritating to the eyes of New Zealand White rabbits.

Executive summary:

The ocular irritation potential of Trisodium 2-[(E)-2-(3-methyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonate was estimated using OECD QSAR toolbox version 3.3 with logPow as the primary descriptor.

Trisodium 2-[(E)-2-(3-methyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonate was estimated to be not irritating to the eyes of New Zealand White rabbits.

Based on the estimated results, Trisodium 2-[(E)-2-(3-methyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonate can be considered not irritating to eyes and can be classified under the category “Not Classified” as per CLP regulation.

Endpoint conclusion:

no adverse effect observed (not irritating)

Endpoint conclusion:

no study available

Skin Irritation:

Several studies were performed to determine the degree of dermal irritation caused by Trisodium 2-[(E)-2-(3-methyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonate in living organisms. These studies include in vivo studies in rabbits as well as predicted data for the target chemical as well its structurally similar read across substances,Tetrasodium 1-acetamido-2-hydroxy-3-(4-((4-sulphonatophenylazo)-7-sulphonato-1-naphthylazo))naphthalene-4,6-disulphonate(CI Food Black 1)[CAS: 2519-30-4], 1-(2-methoxy-5-methyl-4-sulfophenyl-1-azo)-6 sulfo-2-hydroxynapthalene,disodium salt ( ALLURA RED AC)[CAS: 25956-17-6] and Tetrasodium (3E)-6-amino-4 -oxo-3-(2-{7-sulfinato-4-[(E)-2-(4-sulfonatophenyl)diazen-1-yl]naphthalen-1-yl}hydrazin-1-ylidene)-3,4-dihydronaphthalene-2,7-disulfonate(CI Food Black 2)[CAS: 2118-39-0]. Thepredicted data using the OECD QSAR toolbox has also been compared with the experimental data.

In a prediction done by SSS (2017) using the OECD QSAR toolbox v3.3 with log kow as the primary descriptor, the dermal irritation potential was estimated forTrisodium 2-[(E)-2-(3-methyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonate. Trisodium 2-[(E)-2-(3-methyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonate was estimated to be not irritating to the skin of New Zealand White rabbits.

This result is supported by the experimental study conducted(Sustainability Support Services (Europe) AB, 2016) to determine the dermal reaction profile of the structurally similar read across substance, Tetra sodium 1-acetamido-2-hydroxy-3-(4-((4-sulphonatophenylazo)-7-sulphonato-1-naphthylazo))naphthalene-4,6-disulphonate[CAS:2519 -30 -4] in Sprague Dawley rats. The study was performed as per OECD Guidelines 402 and complying to the GLP procedures. Ten rats (5 male and 5 female) were used for conducting dermal irritation /corrosion study.

The animals were kept in their cages for at least 5 days prior to administration for acclimatization to the laboratory condition and after acclimatization period, animals were randomly selected. Approximately 24 hours before application, the hair of each rat was closely clipped from the trunk (dorsal surface and sides from scapular to pelvic area) with an electric clipper, so as to expose at least 10% of the body surface area. The test item was moistened with distilled water. The test item was applied onto the exposed skin of the animal, taking care to spread the test item evenly over the entire area of approximately 10% of the total body surface area or as much of the area as can reasonably be covered. The test item was held in contact with the skin using a porous gauze dressing and non irritating tape around the animal to cover the exposure site for first 24 hours exposure period. Elizabethan collar was placed on each animal for first 24 hours after application of the test item. These collars prevent ingestion of test item. Following 24 hours of exposure, the wrapping was removed and the test site wiped free of excess test item. Distilled water was used to remove residual test item.

The test item Tetra sodium 1-acetamido-2-hydroxy-3-(4-((4-sulphonatophenylazo)-7-sulphonato-1-naphthylazo))naphthalene-4,6-disulphonate was applied to shorn skin of 5 male and 5 female animals at 2000 mg/kg body weight. Administration of the test item at 2000 mg/kg did not result in any skin reaction at the site of application during the study period of 14 days. Administration of the test item did not result in any signs of toxicity and mortality during the study period of 14 days. Animals exhibited normal body weight gain through the study period of 14 days. Gross pathological examination did not reveal any abnormalities attributable to the treatment.

The overall irritation score of the substance was determined to be 0 and no erythema and edema (skin irritation) were found at the end of 14 days observation period after patch removal.

Hence, it was concluded that Tetra sodium 1-acetamido-2-hydroxy-3-(4-((4-sulphonatophenylazo)-7-sulphonato-1-naphthylazo))naphthalene-4,6-disulphonate was Non-Irritating to the skin of Sprague Dawley rats under the experimental conditions tested and classified as “Category- Not Classified” as per CLP Classification.

The above studies are supported by the experimental study summarized in HSDB (Hazardous Substances Data Bank)for allura red acid dye AC.U.S National Library of Medicine ; 2011; for the structurally similar read across substance, 1-(2-methoxy-5-methyl-4-sulfophenyl-1-azo)-6 sulfo-2-hydroxynapthalene,disodium salt ( ALLURA RED AC)[CAS:25956-17-6]. 25% neat or aqueous solution of Disodium 6-hydroxy-5-[(2-methoxy-4-sulphonato-m-tolyl)azo]naphthalene-2-sulphonate was applied to the skin of 200 human volunteers for 72 hours. This was followed by one 48 hours application 10-14 days. After the exposure, the human volunteers were observed for signs of irritation. None of the subjects exhibited compound induced irritation. Hence, disodium 6-hydroxy-5-[(2-methoxy-4-sulphonato-m-tolyl)azo]naphthalene-2-sulphonate was considered to be not irritating to human skin.

These studies are further supported by the experimental study summarized in Scientific Committee on Cosmetology (seventh series), 1988; for the structurally similar read across substance, Tetrasodium (3E)-6-amino-4-oxo-3-(2-{7-sulfinato-4-[(E)-2-(4-sulfonatophenyl)diazen-1-yl]naphthalen-1-yl}hydrazin-1-ylidene)-3,4-dihydronaphthalene-2,7-disulfonate(CI Food Black 2)[CAS: 2118-39-0]. Rabbits were given intracutenous injection of 0.1 ml 5% solution of the test chemical on their back skin and observed for signs of dermal reactions (exact duration of study not mentioned). The intracutenous injection did not induce any cutenous damage to the skin. A black spot formed on the on back skin disappeared largely during the second day and was completely invisible after 2 days. Hence, Food Black 2 can be considered to be not irritating to skin.

Available studies for the target and structurally similar read across substances indicate a very strong possibility ofTrisodium 2-[(E)-2-(3-methyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonatebeing not irritating to skin. Hence,Trisodium 2-[(E)-2-(3-methyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonatecan be considered to be not a skin irritant. Comparing the above annotations with the criteria of CLP regulation, test chemical can be classified under the category “Not Classified”.

Eye Irritation:

Several studies were performed to determine the degree of ocular irritation caused by Trisodium 2-[(E)-2-(3-methyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonate in living organisms. These studies include in vivo studies in rabbits as well as predicted data for the target chemical as well its structurally similar read across substances,trisodium 5-hydroxy-1-(4-sulphophenyl)-4-(4-sulphophenylazo)pyrazole-3-carboxylate(Tartrazine)[CAS: 1934-21-0], 1-(2-methoxy-5-methyl-4 -sulfophenyl-1-azo)-6 sulfo-2-hydroxynapthalene,disodium salt ( ALLURA RED AC)[CAS: 25956-17-6] and Tetrasodium (3E)-6-amino-4-oxo-3-(2-{7-sulfinato-4-[(E)-2-(4-sulfonatophenyl)diazen-1-yl]naphthalen-1-yl}hydrazin-1-ylidene)-3,4-dihydronaphthalene-2,7-disulfonate(CI Food Black 2)[CAS: 2118-39-0]. Thepredicted data using the OECD QSAR toolbox has also been compared with the experimental data.

In a prediction done by SSS (2017) using the OECD QSAR toolbox v3.3 with log kow as the primary descriptor, the ocular irritation potential was estimated forTrisodium 2-[(E)-2-(3-methyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonate. Trisodium 2-[(E)-2-(3-methyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonate was estimated to be not irritating to the eyes of New Zealand White rabbits.

A study was performed by S.D. Gettings et.al, 1992 to determine the ocular irritation potential of thestructurally similar read across substance,trisodium 5-hydroxy-1-(4-sulphophenyl)-4-(4 -sulphophenylazo)pyrazole-3-carboxylate(Tartrazine)[CAS: 1934-21-0].The study was performed according to a modification of the Draize test (Draize, 1959).

Tartrazine (FD & C Yellow No. 5) was prepared daily as a 3% (w/v) suspension in aqueous vehicle containing 0.5% (w/v) hydroxypropyl methylcellulose and 0.25% (w/v) laureth -10 acetate. Tartrazine (FD & C Yellow No. 5) 3% w/v in aqueous vehicle was administered once daily, for a total of 21 days, to the conjunctival sac of the right eye of New Zealand White Rabbits (6 of each sex/ group) at a dose volume of 30µl. Control animals (6 of each sex) received 30/µl of the vehicle daily. Ocular irritation was determined according to a modification of the Draize test (Draize, 1959). Interpretation of observations and assignment of scores were consistent with those described by the Consumer Product Safety Commission (1972).All eyes were scored for ocular irritation pretest (8 days, 24 hr and immediately prior to the initial dose) and approximately 24 hr after each treatment, prior to the next instillation of test material; on days 1, 3, 7, 14 and 21, the eyes were also evaluated for irritation 1 hr after treatment. In addition, all readily observable ocular structures were evaluated for eye stain and particle embedment 24 hr after each treatment.

No lethality or significant clinical signs, and no substance-related weight change were observed. Except slight conjunctival redness or discharge, that were seen sporadically in the eyes of the animals, all animals were free of significant signs of ocular irritation. No significant signs of eye staining or particle depositions were observed. At ophthalmoscopic examinations, no ocular abnormities were noticed.

Hence, FD&C Yellow No.5 (tartrazine) was not expected to cause any irritant effects following repeated exposure to rabbit eyes.

These results are supported by the experimental study summarized in Environment and Quality of Life - Reports (Seventh Series) , European Commission (EC) - Scientific Committee on Cosmetology (SCC) , 1988; for the structurally similar read across substance, 1-(2-methoxy-5-methyl-4-sulfophenyl-1-azo)-6 sulfo-2-hydroxynapthalene,disodium salt ( ALLURA RED AC)[CAS: 25956-17-6]. Disodium 6-hydroxy-5-[(2-methoxy-4-sulphonato-m-tolyl)azo]naphthalene-2-sulphonate was subjected to rabbit eye in the concentration 0.1 ml1.0% aqueous solution .No ocular reaction was observed .Hence , Disodium 6-hydroxy-5-[(2-methoxy-4-sulphonato-m-tolyl)azo]naphthalene-2-sulphonate was considered to be not eye irritant.

These studies are further supported by the experimental study summarized in Scientific Committee on Cosmetology (seventh series), 1988; for the structurally similar read across substance, Tetrasodium (3E)-6-amino-4-oxo-3-(2-{7-sulfinato-4-[(E)-2-(4-sulfonatophenyl)diazen-1-yl]naphthalen-1-yl}hydrazin-1-ylidene)-3,4-dihydronaphthalene-2,7-disulfonate(CI Food Black 2)[CAS: 2118-39-0]. Undiluted 50 mg of test chemical was instilled in the conjunctival sac of 2 rabbits for 24 hours.

Slight erythema was observed in the rabbit eyes which disappeared in 24 hours. No corneal damage was observed. Hence, Food Black 2 can be considered to be not irritating to eyes.

Available studies for the target and structurally similar read across substances indicate a very strong possibility ofTrisodium 2-[(E)-2-(3-methyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonatebeing not irritating to eyes. Hence,Trisodium 2-[(E)-2-(3-methyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonatecan be considered to be not an eye irritant. Comparing the above annotations with the criteria of CLP regulation, test chemical can be classified under the category “Not Classified”.

Available data for Trisodium 2-[(E)-2-(3-methyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonate indicates that it is not likely to cause any irritation or corrosion to skin and eyes.

Hence, Trisodium 2-[(E)-2-(3-methyl-5-oxo-1-{4-[2-(sulfonatooxy)ethanesulfonyl]phenyl}-4,5-dihydro-1H-pyrazol-4-yl)diazen-1-yl]naphthalene-1,5-disulfonate can be classified under the category “Not Classified” as per CLP regulation.