Registration Dossier

Administrative data

First-aid measures

Description of first aid measures:
Following skin contact: Wipe affected skin area with cloth.
Wash with generous amount of water and soap.
After eye contact: Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids apart. In case of troubles or persistent symptoms, consult an opthalmologist.
After swallowing: Rinse mouth with water. Consult physician immediately.
Never give anything by mouth to an unconscious person.

Most important symptoms and effects, both acute and delayed
After contact with skin: Product may cause light irritation to skin.
After eye contact: mild irritant

Indication of any immediate medicala and special treatment needed:
Treat symptomatically.

Fire-fighting measures

Extinguishing media:
Suitable extinguishing media:
Foam, extinguishing powder, carbon dioxide.
Extinguishing media which must not be used for safety reasons:
High power water jet

Special hazards arising from the substance or mixture:
In case of fire may be liberated: Traces of incompletely burned carbon compounds,
formaldehyde, silicon dioxide, carbon monoxide and carbon dioxide.

Advice for firefighters:
Special protective equipment for firefighters:
Wear self-contained breathing apparatus.
Additional information: Hazchem-Code: -
Do not allow water used to extinguish fire to enter drains, ground or waterways.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Avoid contact with skin and eyes.
Provide adequate ventilation. Do not breathe vapours.
Wear suitable protective clothing.

Environmental precautions:
Do not allow to penetrate into soil, waterbodies or drains.

Methods and material for containment and cleaning up:
Take up mechanically, placing in appropriate containers for disposal.

Handling and storage

Precautions for safe handling:
Advices on safe handling: Avoid contact with skin and eyes.
Provide adequate ventilation. Do not breathe vapours.
Wear suitable protective clothing.
Precautions against fire and explosion:
Keep away from sources of ignition - No smoking.
Use explosion-proof equipment and non-sparking tools/utensils.
Do not weld.

Conditions for safe storage, including any incompatibilities:
Requirements for storerooms and containers:
Keep container tightly closed in a cool place.
Avoid temperatures below 0 °C. Protect from frost.
Keep away from heat. Avoid open flames.
Store containers in upright position. Do not re-use the empty container.
Do not drop, drag or bang the container

Transport information

Land transport (ADR/RID)

UN number:
Not classified
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not classified
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not classified
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not classified
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls:
At temperatures > 150 °C: Provide good ventilation and/or an exhaust system in the work area.

Personal protection equipment:
Occupational exposure controls

Respiratory protection: Respiratory protection is required when product is heated to 150°C or above.
Combination filter B-P2 or B-P3 according to EN 14387.
Hand protection: Protective gloves according to EN 374.
Glove material: Plastic or rubber
Breakthrough time 480 min
Observe glove manufacturer's instructions concerning penetrability and breakthrough time.
Eye protection: Tightly sealed goggles according to EN 166.
Body protection: Wear suitable protective clothing.
General protection and hygiene measures:
Do not breathe vapours. Avoid contact with skin and eyes.
Wash hands before breaks and after work.
When using do not eat, drink or smoke.
Eye wash facility must be provided.

Stability and reactivity

Product is stable under normal storage conditions.

Conditions to avoid:
Keep away from heat sources, sparks and open flames.

Incompatible materials
None known

Hazardous decomposition products
Thermal breakdown of this product during fire or very high heat condition may evolve the following hazardous decomposition products: Traces of incompletely burned carbon compounds, formaldehyde, silicon dioxide, carbon monoxide and carbon dioxide.
Thermal decomposition: > 150 °C

Disposal considerations

Waste treatment methods:

Product:
Waste key number: 07 02 17 = Waste containing silicones
Recommendation: Incinerate according to applicable local, state and federal regulations.

Contaminated packaging:
Waste key number: 15 01 04 = Metallic packaging or 150102 = Plastic packaging
Recommendation: Dispose of waste according to applicable legislation.
Do not re-use the empty container.