4-methyl-4-phenylpentan-2-one

Skin irritation / corrosion

Administrative data

Endpoint:

skin irritation: in vitro / ex vivo

Type of information:

experimental study

Adequacy of study:

key study

Study period:

13 Feb - 02 Jun 2017

Reliability:

1 (reliable without restriction)

Rationale for reliability incl. deficiencies:

guideline study

Data source

Reference

Reference Type:

study report

Title:

Unnamed

Year:

2017

Report date:

2017

Materials and methods

Test guideline

Test guideline 1

Qualifier:

according to guideline

Guideline:

OECD Guideline 439 (In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method)

Version / remarks:

adopted 28 Jul 2015

Deviations:

no

Test guideline 2

Qualifier:

according to guideline

Guideline:

EU Method B.46 (In Vitro Skin Irritation: Reconstructed Human Epidermis Model Test)

Version / remarks:

Commission Regulation No 440/2008 of 30 May 2008, 1st ATP of 23 Jul 2009

Deviations:

no

GLP compliance:

yes (incl. QA statement)

Remarks:

Hess. Ministerium für Umwelt, Klimaschutz, Landwirtschaft und Verbraucherschutz, Wiesbaden, Germany

Test material

Test material information

Constituent 1

Reference substance name:

4-methyl-4-phenylpentan-2-one

EC Number:

231-007-9

EC Name:

4-methyl-4-phenylpentan-2-one

Cas Number:

7403-42-1

Molecular formula:

C12H16O

IUPAC Name:

4-methyl-4-phenylpentan-2-one

In vitro test system

Test system:

human skin model

Source species:

human

Cell type:

non-transformed keratinocytes

Cell source:

other: EpiDerm™

Vehicle:

unchanged (no vehicle)

Details on test system:

RECONSTRUCTED HUMAN EPIDERMIS (RHE) TISSUE
- Model used: EpiDerm™ (MatTek Corporation, Bratislava, Slovakia)
- Tissue batch number: 23395
- Delivery date: 31 May 2016
- Date of initiation of testing: 21 Feb 2017

TEMPERATURE USED FOR TEST SYSTEM
- Temperature used during treatment / exposure: 37 ± 1.5 °C for 35 min in the incubator; thereafter at room temperature for 25 min in a sterile bench

REMOVAL OF TEST MATERIAL AND CONTROLS
-Volume and number of washing steps: Tissues were gently rinsed with DPBS at least 15 times in order to remove any residual test material. After the rinsing the inserts were submerged in DPBS at least 3 times. Afterwards the inserts were once again rinsed with DPBS from the inside and the outside.

MTT DYE USED TO MEASURE TISSUE VIABILITY AFTER TREATMENT / EXPOSURE
- MTT concentration: 1 mg/mL
- Incubation time: 3 h
- Spectrophotometer: microplate reader (Versamax, Molecular Devices, Softmax Pro v.4.7.1)
- Wavelength: 570 nm

FUNCTIONAL MODEL CONDITIONS WITH REFERENCE TO HISTORICAL DATA
- Viability: The quality of the EpiDerm™ tissue was assessed by undertaking an MTT cell viability test. The determined OD (540 - 570 nm) was 1.211 ± 0.175 (acceptance criteria: 1.0 - 3.0).
- Barrier function: The barrier function was assessed by determination of the exposure time required to reduce tissue viability by 50% (ET-50) upon application of 100 µL of 1% Triton X-100. The ET-50 value was determined to be 4.83 h (acceptance criteria: 4.77-8.72 h).
- Contamination: The cells used to produce the EpiDerm™ tissue were screened for the presence of viruses, bacteria, yeast and other fungi.

NUMBER OF REPLICATE TISSUES: 3

CONTROL TISSUES USED IN CASE OF MTT DIRECT INTERFERENCE
Since the test substance did not directly reduce MTT, an additional test with freeze-killed tissues was not performed.

NUMBER OF INDEPENDENT TEST SEQUENCES / EXPERIMENTS TO DERIVE FINAL PREDICTION: single experiment

PREDICTION MODEL / DECISION CRITERIA
- The test substance is considered to be irritant to skin if the viability after 1 hour exposure is less or equal than 50%.

Control samples:

yes, concurrent negative control

yes, concurrent positive control

Amount/concentration applied:

TEST MATERIAL
- Amount applied: 30 µL

NEGATIVE CONTROL
- Amount applied: 30 µL

POSITIVE CONTROL
- Amount applied: 30 µL
- Concentration: 5% aqueous solution

Duration of treatment / exposure:

60 min

Duration of post-treatment incubation (if applicable):

approximately 42 h

Number of replicates:

triplicates for each treatment and control group

Results and discussion

In vitro

Results

Irritation / corrosion parameter:

% tissue viability

Run / experiment:

60 min

Value:

15.7

Vehicle controls validity:

not applicable

Negative controls validity:

valid

Positive controls validity:

valid

Other effects / acceptance of results:

OTHER EFFECTS:
- Direct-MTT reduction: The test substance was not considered to be a MTT reducer.
- Colour interference with MTT: The test substance did not change colour when mixed with deionised water. Also its intrinsic colour was not intensive.

ACCEPTANCE OF RESULTS:
- Acceptance criteria met for negative control: The negative control OD (1.978, 1.710 and 1.638) was in the range of the required acceptability criterion of mean OD ≥ 0.8 and ≤ 2.8 for the 60 min treatment interval thus showing the quality of the tissues.
- Acceptance criteria met for positive control: Exposure to the positive control induced a decrease in the relative absorbance to 3.1% as compared to the negative control thus confirming the validity of the test system.
- Acceptance criteria met for variability between replicate measurements: The relative standard deviations of the 3 identical replicates of the test substance and negative control in the main test were below 10.4% (threshold of OECD 439: <18%).

Any other information on results incl. tables

Table 2. Results after treatment with the test substance and controls

Test group	Mean absorbance at 570 nm*			Rel. absorbance (%)**			Rel. SD (%)	Rel. absorbance (% of negative control)***
	Tissue 1	Tissue 2	Tissue 3	Tissue 1	Tissue 2	Tissue 3
Negative control	1.978	1.710	1.638	111.4	96.3	92.3	10.1	100.0
Positive control	0.057	0.056	0.053	3.2	3.1	3.0	4.1	3.1
Test substance	0.312	0.264	0.260	17.6	14.9	14.7	10.4	15.7

* Mean of three replicate wells after blank correction (blank = 0.036)

** Relative absorbance per tissue (rounded values): 100 × (absorbance tissue) / (mean absorbance negative control)

*** Relative absorbance per treatment group (rounded values): 100 × (mean absorbance test substance/positive control) / (mean absorbance negative control)

Applicant's summary and conclusion

Interpretation of results:

other: irritating potential (Skin Irrit. 2 or Skin Corr. 1 according to Regulation (EC) No 1272/2008)

Conclusions:

Under the conditions of the conducted test, the test substance possessed irritating properties towards reconstructed human epidermis tissue in the EpiDerm™ model.

Executive summary:

The skin irritation potential of the test substance was determined by an in vitro skin irritation test using a reconstructed human skin model according to OECD Guideline 439 and in compliance with GLP (2017). After treatment with the test substance for 60 min the tissue viability decreased to 15.7% compared to the negative control (threshold for irritancy≤50%).Therefore, the test substance is considered to possess an irritant potential towards human-derived epidermal keratinocytes.