Registration Dossier

Physical & Chemical properties

Density

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
relative density
Type of information:
experimental study
Adequacy of study:
key study
Study period:
From 01 October 2015 to 11 July 2017
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Reference:
Composition 0
Qualifier:
according to
Guideline:
OECD Guideline 109 (Density of Liquids and Solids)
Version / remarks:
October 2012
Deviations:
no
Qualifier:
according to
Guideline:
EU Method A.3 (Relative Density)
Version / remarks:
May 2008
Deviations:
no
Qualifier:
according to
Guideline:
EPA OPPTS 830.7300 (Density / Relative Density / Bulk Density)
Version / remarks:
June 2002
Deviations:
no
GLP compliance:
yes (incl. certificate)
Type of method:
pycnometer method
Test material information:
Composition 1
Specific details on test material used for the study:
In order to obtain a homogeneous sample, the test item is liquefied in a water bath before to be used.
The water bath was at a temperature of 46.8°C.
Type:
density
Remarks:
Test 1
Density:
1.06 g/cm³
Temp.:
20 °C
Type:
density
Remarks:
Test 2
Density:
1.06 g/cm³
Temp.:
20 °C
Key result
Type:
density
Remarks:
Mean on the two tests
Density:
1.06 g/cm³
Temp.:
20 °C
Key result
Type:
relative density
Density:
1.06 other: no unit for relative density
Temp.:
20 °C

The results of the two test have an accuracy <0.02 g/cm3. According to the guidelines, the test item density was given as the mean value.

The relative density have been obtained with the ratio of test item density at 20°C and water density at 4°C.

Conclusions:
The test item density at 20°C is 1.06 g/cm3. This value correspond to a relative density of 1.06.
Executive summary:

The test item density was determined with gas comparison pycnometer method according to recognised guidelines and under GLP.

No deviation from these guidelines has been observed during the study.

The test item density at 20°C is 1.06 g/cm3. This value correspond to a relative density of 1.06.

Description of key information

The test item density was determined in an experimental key study (Klimisch validity one, according to recognised guidelines).

Key value for chemical safety assessment

Relative density at 20C:
1.06

Additional information