Registration Dossier

Administrative data

First-aid measures

Description of first aid measures

General information
Remove soiled or soaked clothing immediately
In any case show the physician the Safety Data Sheet

After inhalation
When inhaled remove to fresh air and seek medical aid.

After contact with skin
In case of contact with skin wash off immediately with soap and water

After contact with eyes
In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice

After ingestion
Rinse mouth thoroughly with water.
Do not induce vomiting.
Seek medical advice immediately.

Most important symptoms and effects, both acute and delayed

Symptoms
The possible symptoms known are those derived from the labelling

Hazards
The possible risks known are those derived from the labelling

Indication of any immediate medical attention and special treatment needed
Treatment
Treat symptomatically.

Fire-fighting measures

Extinguishing media

Suitable extinguishing media
water spray jet
foam
carbon dioxide
dry powder

Special hazards arising from the substance or mixture
In the event of fire the following can be released:
Nitrous gases (NOx)
Carbon monoxide (CO)
Carbon dioxide (CO2)
Combustion gases of organic materials must in principle be graded as inhalation poisons.

Advice for firefighters
Special protective equipment for firefighting
Use self-contained breathing apparatus

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Use personal protective clothing.

Environmental precautions
Do not discharge into the drains/surface waters/groundwater.

Methods and material for containment and cleaning up
Pick up with absorbent material (eg sand, sawdust). Rinse away rest with water
Dispose of as prescribed

Handling and storage

Precautions for safe handling

Advice on safe handling
No special measures necessary if stored and handled as prescribed.

Advice on protection against fire and explosion
Observe the general rules of industrial fire protection

Conditions for safe storage, including any incompatibilities

Further information on storage conditions
- sensitive to frost - In case of the product becoming opaque, thickening or being frozen due
to the effects of cold, allow to thaw slowly at room temperature. Stir briefly before use.
Keep container tightly closed in a cool, well-ventilated place

Transport information

Land transport (ADR/RID)

Shippingopen allclose all
Remarks:
not restricted

Inland waterway transport (ADN(R))

Shippingopen allclose all
Remarks
not restricted

Marine transport (IMDG)

Remarks
not restricted

Air transport ICAO/IATA

Remarks
not restricted
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters

Exposure limit values
Exposure limit values are not available.

DNEL/DMEL values
DNEL/DMEL values are not available.

PNEC values
PNEC values are not available.

Exposure controls

General protective measures
Avoid contact with eyes and skin
Do not inhale vapours

Hygiene measures
Observe the usual precautions when handling chemicals.
Do not eat or drink during work time.
Keep away from foodstuffs and beverages.
Wash hands before breaks and after work.
Remove soiled or soaked clothing immediately.

Respiratory protection : Use respiratory protection in case of insufficient exhaust ventilation or prolonged exposure
Full mask to standard DIN EN 136
Filter K (ammonia and its organic derivatives), to standard DIN EN 141
The use of filter apparatus presupposes that the environment atmosphere contains at least 17% oxygen by volume, and does not exceed the maximum gas concentration, usually 0.5% by volume. Relevant guidelines to be considered include EN 136/141/143/371/372 as well as other national regulations.

Hand protection : For long-term exposure:
Butyl rubber gloves.
Minimum breakthrough time / gloves : 480 min
Minimum thickness / gloves 0,7 mm
For short-term exposure (splash protection):
Nitrile rubber gloves.
Minimum breakthrough time / gloves : 30 min
Minimum thickness / gloves 0,4 mm
These types of protective gloves are offered by various manufacturers. Please note the manufacturers´ detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.

Eye protection : safety glasses

Stability and reactivity

Chemical stability
Under normal conditions the product is stable.

Possibility of hazardous reactions
No hazardous reactions known.

Conditions to avoid
None known.

Incompatible materials
not known

Hazardous decomposition products
When handled and stored appropriately, no dangerous decomposition products are known

Disposal considerations

Waste treatment methods

Product
In accordance with local authority regulations, take to special waste incineration or chemical/physical treatment plant

Uncleaned packaging
Regulations concerning reuse or disposal of used packaging materials must be observed.