Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

Endpoint:
eye irritation: in vitro / ex vivo
Type of information:
experimental study
Adequacy of study:
key study
Study period:
October 2015 -
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study

Data source

Reference
Reference Type:
study report
Title:
Unnamed
Year:
2016
Report date:
2016

Materials and methods

Test guideline
Qualifier:
according to guideline
Guideline:
OECD Guideline 437 (Bovine Corneal Opacity and Permeability Test Method for Identifying i) Chemicals Inducing Serious Eye Damage and ii) Chemicals Not Requiring Classification for Eye Irritation or Serious Eye Damage)
Deviations:
no
GLP compliance:
yes (incl. QA statement)
Remarks:
No analysis was conducted to determine the homogeneity, concentration or stability of the test item formulation. This is an exception with regard to GLP and has been reflected in the GLP compliance statement

Test material

Constituent 1
Reference substance name:
Thio-Acid
IUPAC Name:
Thio-Acid
Test material form:
solid: particulate/powder
Remarks:
migrated information: powder
Details on test material:
- Name of test material (as cited in study report): Thio-Acid
- Substance type: Powder
- Physical state: Solid
- Analytical purity: 98.75% area (based on impurities)
- Lot/batch No.: 0000120575
Specific details on test material used for the study:
Batch: 0000120575
Purity: 98.76%
Expiry date: 5 July 2016

Test animals / tissue source

Species:
other: bovine corneas
Strain:
not specified
Details on test animals or tissues and environmental conditions:
Eyes from adult cattle (typically 12 to 60 months old) were obtained from a local abattoir as a by-product from freshly slaughtered animals. The eyes were excised by an abattoir employee after slaughter, and were placed in Hanks’ Balanced Salt Solution (HBSS) supplemented with antibiotics (penicillin at 100 IU/mL and streptomycin at 100 µg/mL). They were transported to the test facility over ice packs on the same day of slaughter. The corneas were prepared immediately on arrival.

Test system

Vehicle:
other: 0.9% w/v sodium chloride solution
Controls:
yes, concurrent positive control
yes, concurrent negative control
Amount / concentration applied:
20% w/v of test material in 0.9% w/v sodium chloride solution. Test item was formulated within 2 hours of being applied to the system.
20% w/v of Imidazole in 0.9% w/v sodium chloride solution was used as positive control.
Duration of treatment / exposure:
The MEM was removed from the anterior chamber of the BCOP holder and 0.75 mL of the test item preparation or control items were applied to the appropriate corneas. The holders were gently tilted back and forth to ensure a uniform application of the item over the entire cornea.
Observation period (in vivo):
Not applicable
Duration of post- treatment incubation (in vitro):
240 minutes at 32+/-1 degrees
Number of animals or in vitro replicates:
3 corneas for test item, 3 corneas for negative control and 3 corneas for positive control
Details on study design:
All eyes were macroscopically examined before and after dissection. Only corneas free of damage were used. The cornea from each selected eye was removed leaving a 2 to 3 mm rim of sclera to facilitate handling. The iris and lens were peeled away from the cornea. The isolated corneas were immersed in a dish containing HBSS until they were mounted in Bovine Corneal Opacity and Permeability (BCOP) holders. The anterior and posterior chambers of each BCOP holder were filled with complete Eagle’s Minimum Essential Medium (MEM) without phenol red and plugged. The holders were incubated at 32 ± 1 ºC for 60 minutes. At the end of the incubation period each cornea was examined for defects. Only corneas free of damage were used.

The medium from both chambers of each holder was replaced with fresh complete MEM. A pre-treatment opacity reading for average opacity was taken for each cornea using a calibrated opacitometer. Three corneas with opacity values close to the median value of all corneas were allocated to the negative control. Three corneas were also allocated to the test item and three corneas to the positive control item.

The MEM was removed from the anterior chamber of the BCOP holder and 0.75 mL of the test item preparation or control items were applied to the appropriate corneas. The holders were gently tilted back and forth to ensure a uniform application of the item over the entire cornea. Each holder was incubated, anterior chamber uppermost, at 32 ± 1 ºC for 240 minutes. At the end of the exposure period the test item and control items were removed from the anterior chamber and the cornea was rinsed three times with fresh complete MEM containing phenol red before a final rinse with complete MEM without phenol red. The anterior chamber was refilled with fresh complete MEM without phenol red. A post-treatment opacity reading was taken and each cornea was visually observed.

Following the opacity measurement the permeability of the corneas to sodium fluorescein was evaluated. The medium from the anterior chamber was removed and replaced with 1 mL of sodium fluorescein solution (5 mg/mL). The dosing holes were plugged and the holders incubated, anterior chamber uppermost, at 32 ± 1 ºC for 90 minutes.

After incubation the medium in the posterior chamber of each holder was decanted and retained. 360 µL of medium representing each cornea was applied to a designated well on a 96-well plate and the optical density at 492 nm (OD492) was measured using the Anthos 2001 microplate reader.

The corneas were retained after testing for possible conduct of histopathology. Each cornea was placed into a pre-labeled tissue cassette fitted with a histology sponge to protect the endothelial surface. The cassette was immersed in 10% neutral buffered formalin.

Results and discussion

In vitro

Results
Irritation parameter:
in vitro irritation score
Run / experiment:
Test item
Value:
ca. 0.9
Negative controls validity:
valid
Remarks:
negative control score: 1.8
Positive controls validity:
valid
Remarks:
positive control score: 77.6
Other effects / acceptance of results:
The positive control In Vitro Irritancy Score was within the range of 66.9 to 101.4. The positive control acceptance criterion was therefore satisfied.
The negative control gave opacity of ≤4.1 and permeability ≤0.105. The negative control acceptance criteria were therefore satisfied.

Any other information on results incl. tables

Tables with individual corneal results can be found in attached "BCOP Tables".

Applicant's summary and conclusion

Interpretation of results:
GHS criteria not met
Conclusions:
No category. Not requiring classification to UN GHS or EU CLP.
Executive summary:

Introduction

The purpose of this test was to identify test items that can induce serious eye damage and to identify test items not requiring classification for eye irritation or serious eye damage. The Bovine Corneal Opacity and Permeability (BCOP) test method is an organotypic model that provides short-term maintenance of normal physiological and biochemical function of the bovine cornea in vitro. In this test method, damage by the test item is assessed by quantitative measurements of changes in corneal opacity and permeability. The test method can correctly identify test items (both chemicals and mixtures) inducing serious eye damage as well as those not requiring classification for eye irritation or serious eye damage, as defined by the United Nations (UN) Globally Harmonized System of Classification and Labelling of Items (GHS) and EU Classification, Labelling and Packaging (CLP) of chemicals (Regulation (EC) No 1272/2008), and it was therefore endorsed as scientifically valid for both purposes. Test items inducing serious eye damage are classified as UN GHS and EU CLP Category 1. Items not classified for eye irritation or serious eye damage are defined as those that do not meet the requirements for classification as UN GHS/ EU CLP Category 1 or 2 (2A or 2B), i.e. they are referred to as UN GHS/EU CLP No Category.

Method

The test item was applied at a concentration of 20% w/v in 0.9% w/v sodium chloride solution for 240 minutes. Negative and positive control items were tested concurrently. The two endpoints, decreased light transmission through the cornea (opacity) and increased passage of sodium fluorescein dye through the cornea (permeability) were combined in an empirically derived formula to generate an In Vitro Irritancy Score (IVIS).

Interpretation

The test item is classified according to the prediction model below:

 IVIS Classification 
 ≤ 3 No category. Not requiring classification to UN GHS or EU CLP
 > 3; ≤55 No prediction of eye irritation can be made 
 > 55  Category 1. UN GHS or EU CLP Causes serious eye damage

Results

The in vitro irritancy scores are summarised as follows:

 Treatment  In vitro irritancy score
 Test item  0.9
 Negative control  1.8
 Positive control  77.6