Registration Dossier

Administrative data

First-aid measures

1. Description of first aid measures
Inhalation:
Remove person to fresh air. If you feel unwell, get medical attention.
Skin Contact:
Wash with soap and water. If you feel unwell, get medical attention.
Eye Contact:
Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get medical attention.
If Swallowed:
No need for first aid is anticipated.


Fire-fighting measures

1. Extinguishing media
In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as foam to extinguish.


2. Special hazards arising from the substance or mixture
None inherent in this product.
Hazardous Decomposition or By-Products
Substance Condition
Carbon monoxide During Combustion
Carbon dioxide During Combustion

3. Advice for fire-fighters
No special protective actions for fire-fighters are anticipated.

Accidental release measures

1. Personal precautions, protective equipment and emergency procedures
Evacuate area. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice.

2. Environmental precautions
Avoid release to the environment

3. Methods and material for containment and cleaning up
Contain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not remove a physical, health, or environmental hazard. Collect as much of the spilled material as possible. Place in a closed container approved for transportation by appropriate authorities. Clean up residue with an appropriate solvent selected by a qualified and authorized person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and SDS. Seal the container. Dispose of collected material as soon as possible.

Handling and storage

1. Precautions for safe handling
Avoid breathing dust/fume/gas/mist/vapors/spray. Do not eat, drink or smoke when using this product. Wash thoroughly after handling.

2. Conditions for safe storage including any incompatibilities
No special storage requirements.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

1. Control parameters
Occupational exposure limits
No occupational exposure limit values exist for any of the known components.

2.1. Engineering controls
Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapors/spray. If ventilation is not adequate, use respiratory protection equipment.

2.2. Personal protective equipment (PPE)
Eye/face protection
The following eye/face protection(s) are recommended: Safety Glasses with side shields.

Skin/hand protection
No chemical protective gloves are required.

Respiratory protection
None required.

Stability and reactivity

1. Reactivity
This material is considered to be non reactive under normal use conditions.

2. Chemical stability
Stable.

3. Possibility of hazardous reactions
Hazardous polymerization will not occur.

4. Conditions to avoid
None known.

5. Incompatible materials
None known.

6. Hazardous decomposition products
None known.

Disposal considerations

Waste treatment methods
Dispose of contents/ container in accordance with the local/regional/national/international regulations.